Each pixel value corresponds to the difference (anomaly) between the mean “Best-Quality” Max-NDVI of the week specified (e.g. Week 18, 2000-2014) and the “Best-Quality” Max-NDVI of the same week in a specific year (e.g. Week 18, 2015). Max-NDVI anomalies < 0 indicate where weekly Max-NDVI is lower than normal. Anomalies > 0 indicate where weekly Max-NDVI is higher than normal. Anomalies close to 0 indicate where weekly Max-NDVI is similar to normal.

This thematic layer represents the characterization of the hardness of surface water in Quebec. The hardness is presented according to the medians calculated from the concentrations of calcium and magnesium ions in seven classes. Water hardness influences the toxicity of certain metals, including barium, beryllium, cadmium, chromium, copper, manganese, nickel, nickel, lead, and zinc. Surface water quality criteria are determined according to the hardness of the receiving watercourse. These criteria are used to make judgments about surface water quality and are the basis for groundwater criteria used to assess the quality of groundwater that recurs as surface water. Finally, they are the key element in calculating environmental discharge objectives (EORs) used to assess the quality of wastewater discharges to the aquatic environment. For a discharge that occurs on an annual basis, the median hardness of the receiving water body is generally used to calculate water quality criteria for aquatic life.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The theme on physicochemical monitoring of rivers and rivers presents data from all stations in networks monitoring water quality in rivers in Quebec and the St. Lawrence River.The purpose of networks for monitoring general water quality is to characterize, using current physicochemical and bacteriological parameters, the quality of water in spatial terms and to monitor the evolution of this quality over time. For the regular monitoring of the general quality of river and river water, the parameters measured are: total phosphorus, total nitrogen, nitrites and nitrates, ammonia nitrogen, chlorophyll a, pheopigments, faecal coliforms, faecal coliforms, turbidity, suspended matter, pH, conductivity, dissolved organic carbon and temperature. This data is used to calculate the Bacteriological and Physicochemical Water Quality Index (IQBP), a water quality classification index.The data set on physicochemical monitoring of rivers and rivers also includes the drainage areas of some of the stations. The attribute table provides a compilation of land use by category for the last year available at the time the data was generated. Follow-up is carried out annually.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Land Features entities are: Island, Shoreline, Wooded Area, Saturated soil, Landform Feature (esker, sand\...), and Cut Line. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Each pixel value corresponds to the best quality maximum NDVI recorded within that pixel over the week specified. Poor quality pixel observations are removed from this product. Observations whose quality is degraded by snow cover, shadow, cloud, aerosols, and/or low sensor zenith angles are removed (and are assigned a value of “missing data”). In addition, negative Max-NDVI values, occurring where R reflectance > NIR reflectance, are considered non-vegetated and assigned a value of 0. This results in a Max-NDVI product that should (mostly) contain vegetation-covered pixels. Max-NDVI values are considered high quality and span a biomass gradient ranging from 0 (no/low biomass) to 1 (high biomass).

Each pixel value corresponds to the actual number (count) of valid Best-quality Max-NDVI values used to calculate the mean weekly values for that pixel. Since 2020, the maximum number of possible observations used to create the Mean Best-Quality Max-NDVI for the 2000-2014 period is n=20. However, because data quality varies both temporally and geographically (e.g. cloud cover and snow cover in spring; cloud near large water bodies all year), the actual number (count) of observations used to create baselines can vary significantly for any given week and year.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Water quality in Canadian rivers indicators provide a measure of the ability of river water across Canada to support plants and animals. At each monitoring site, water quality data are compared to water quality guidelines to create a rating for the site. If measured water quality is below the guidelines, it can maintain a healthy ecosystem. Water quality at a monitoring site is considered excellent when substances in a river are very rarely measured above their guidelines. Conversely, water quality is rated poor when measurements are usually above their guidelines, sometimes by a wide margin. These indicators provide information about the state of surface water quality and its change through time, to support water resource management. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators - Home page:https://www.canada.ca/environmental-indicators

Each pixel value corresponds to the day-of-week (1-7) from which the Weekly Best-Quality NDVI retrieval is obtained (1 = Monday, 7 = Sunday).

Results of the last hour available, in real time, of the [Air Quality Index (AQI)] (https://www.iqa.environnement.gouv.qc.ca/contenu/index.asp) for the stations of the [Quebec Air Quality Monitoring Network] (https://www.environnement.gouv.qc.ca/air/reseau-surveillance/Carte.asp). These results exclude those from stations located on [Montreal Island] (https://www.donneesquebec.ca/recherche/dataset/vmtl-rsqa-indice-qualite-air).The IQA is an information and awareness tool designed to inform the population about the quality of ambient air in Quebec.If you have any questions about this data, contact the Info-Air department:.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The Riparian Quality Index (IQBR) is used to assess the ecological condition of the shoreline environment. It is built from nine components that have been weighted according to their potential to perform ecological functions in terms of the protection of aquatic ecosystems.Data on shoreline quality come from benthos monitoring stations sampled between 2003 and 2023.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**