The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Water quality in Canadian rivers indicators provide a measure of the ability of river water across Canada to support plants and animals. At each monitoring site, water quality data are compared to water quality guidelines to create a rating for the site. If measured water quality is below the guidelines, it can maintain a healthy ecosystem. Water quality at a monitoring site is considered excellent when substances in a river are very rarely measured above their guidelines. Conversely, water quality is rated poor when measurements are usually above their guidelines, sometimes by a wide margin. These indicators provide information about the state of surface water quality and its change through time, to support water resource management. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators - Home page:https://www.canada.ca/environmental-indicators

Water quality sample year information to be used in conjunction with CMI Water Quality Sampling Sites.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This dataset provides the results obtained by Health Canada’s Radiological Monitoring Network (CRMN) for the tritium activity concentration in drinking water originating from the water treatment plants in Ottawa, ON. More information about the CRMN network can be found on the Health Canada website (see link below). The results provided are the tritium activity concentration in units of becquerels per litre (Bq/L). Although ensuring water quality is a matter of provincial jurisdiction, the CRMN, in collaboration with the city of Ottawa, has been conducting a targeted program to monitor the radiological content of drinking water from two water treatment plants in Ottawa, ON.The Guidelines for Canadian Drinking Water Quality recommend a Maximum Acceptable Concentration (MAC) for tritium in drinking water of 7000 Bq/L. The measured activity concentrations of tritium in drinking water are well below this guideline value.The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

Digitization of long-term water chemistry data collected between 1920's - 1990's from lakes across Saskatchewan by the Saskatchewan Fisheries Research Laboratory. Samples were collected using methods from the Standard Methods for the Examination of Water and Wastewater (APHA, AWWA and WPCF). This data serves as a baseline for water quality.This dataset is a digitization from paper records of water chemistry data across Saskatchewan collected by the Saskatchewan Fisheries Research Laboratory. Data ranges from the 1920's to the 1990's and were sampled using methodes from the Standard Methods for the Examination of Water and Wastewater (American Public Health Association, American Water Works Association and Water Pollution Control Facility) This long-term water chemistry data serves as a baseline for water quality. Different variables of water chemistry are organized into individual fields. The units of measurement appear at the end of each field name. Due to the historical nature of the data some uncertainty exist in values.  Additonal notes on data: ND: no detection Trace: trace amounts Nil: zero NA: no data 

This dataset provides the results obtained by Health Canada’s Canadian Radiological Monitoring Network (CRMN) for the gross alpha and beta activity concentrations in drinking water, given in units of becquerels per liter (Bq/L). More information about the CRMN network can be found on the Health Canada website (see link below). Although water quality is a matter of provincial jurisdiction, the CRMN, in collaboration with the city of Ottawa, has been conducting a targeted program to monitor the radiological content of drinking water from two water treatment plants in Ottawa, ON. The Guidelines for Canadian Drinking Water Quality recommend screening levels of 0.5 Bq/L and 1.0 Bq/L for gross alpha and gross beta activity, respectively. The screening levels are set to reflect the most restrictive Maximum Acceptable Concentrations (MACs) for specific radionuclides in drinking water. If the screening levels are not exceeded, compliance with the guidelines can be inferred. The screening levels set out in the Guidelines for Canadian Drinking Water Quality are calculated based on annual averages of radionuclides in drinking water. Short-term exposure to levels above those recommended by these guidelines does not indicate a health risk. The measured gross alpha and gross beta activity concentrations presented here are well below the screening levels set by the Guidelines for Canadian Drinking Water Quality, with only one exception to date. This occurred February 28, 2011, and was attributable to the flushing of lead pipes at the water treatment plant. It resulted in a spike of naturally occurring lead radionuclides that was dealt with immediately by the City of Ottawa. The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

The Elk Valley Area Based Management Plan (ABMP) - “Elk Valley Water Quality Plan” was developed according to Ministerial Order No. 113 to remediate water quality effects of past coal mining and to guide future development. The Elk Valley Water Quality Plan was developed by Teck with input from the public, First Nations, governments, technical experts and other stakeholders. The purpose of the Plan is to identify a strategy and implement solutions to address increasing selenium and nitrate water concentrations within the Valley, and assess and track levels of cadmium and sulphate in waters; while at the same time allowing for continued sustainable mining in the Valley. The Plan also lays out a strategy to address calcite formation associated with historical and current mining activity. The Plan was submitted to the British Columbia Minister of Environment for approval on July 22, 2014. The ministry amended the Elk Valley ABMP in 2025. More information can be found at https://elkvalleywaterquality.gov.bc.ca/.

Index containing links to Water Quality Objectives Reports , Summary and Technical, available through Internet

This map displays the risk of soil degradation by water in the agricultural region of Alberta. Water erosion is a concern because it reduces soil quality by removing soil particles and nutrients, and reduces water quality if these particles are carried into nearby water bodies. The map uses five classes to describe the water erosion risk on bare, unprotected mineral soil: negligible, low, moderate, high and severe.This resource was created using ArcGIS, originally published as a print map in 1993 .

INW - Inland water resources (inlandWaters)Inland water features, drainage systems, and their characteristics. For example, resources describing rivers and glaciers, salt lakes, water use plans, dams, currents, floods, water quality, and hydrographic charts

The Fish Habitat Management System for Yukon Placer Mining replaced the Yukon Place Authorization (YPA) in 15 Yukon watersheds on April 11, 2008. Founded on principles of adaptive management and incorporating a risk-based approach to decision-making, the system is intended to balance the objectives of a sustainable Yukon placer mining industry with the conservation and protection of fish and fish habitat supporting fisheries Adaptive management recognizes that the effectiveness of any management system is hampered by a degree of uncertainty and lack of knowledge. It seeks to improve the system by monitoring the effects of management actions, in order to learn from the results. The Adaptive Management Framework for Yukon placer mining is complemented by traditional knowledge and water quality objectives monitoring, aquatic health monitoring and economic health monitoring programs. The results should provide new information and a rational basis for making any adjustments required to achieve the two management objectives. The water quality objectives monitoring program is governed by the Water Quality Objectives Monitoring Protocol. The Protocol describes the locations, timing, frequency and methods employed during sampling, as well as the methods used to analyze sampling data. Precipitation data was collected from a variety of sources to assist in the interpretation of results. The water quality objectives monitoring program relies upon both continuous sampling and grab sampling. Continuous sampling is performed by automated instruments that pump water from the creek or river at a preset volume and at precise times each day. Grab samples are taken by personnel at a selected location, depth and time. Normally the quantity of water taken is sufficient for all the physical and chemical analyses that will be done on the sample. Grab sampling is also performed during sampling "blitzes", when single grab samples are collected from as many sites as possible within a short timeframe in order to get a snapshot of the water quality in a watershed over a 24 hour period.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)