The Canadian indexes of social resilience and vulnerability were created to provide area-based information on resilience and vulnerability to natural hazards and disasters across Canada. Specifically, the Canadian Index of Social Resilience (CISR) aims to reflect a community’s ability to respond to and recover from natural hazards. In contrast, the Canadian Index of Social Vulnerability (CISV) aims to reflect the social vulnerability of an area based on factors that have the potential to amplify the impact of disasters on populations.Before the CISR and CISV were built, indicator frameworks were developed for social resilience and social vulnerability, respectively. Indicators were selected because of their demonstrated association with social resilience or social vulnerability. The selection was informed by the theoretical and research literature, existing indexes, availability of relevant data and engagement with subject-matter experts.The CISR and the CISV were created using data from Dissemination areas (DAs) across the country. The selected indicators were included in a principal component analysis, which is a statistical technique that allows a large number of indicators to be collapsed into a smaller number of interpretable components. Based on the results of the principal component analysis, DA-level scores were calculated for each index. Higher CISR scores correspond to DAs that are more resilient and higher CISV scores correspond to DAs that are more vulnerable.These indexes can be used to better understand areas which may experience the largest disproportional social impacts from natural hazards.

Sexual reproduction is critical to the resilience of seagrass beds impacted by habitat degradation or environmental changes, as robust seed banks allow new shoots to establish each year. Reproductive strategies of seagrass beds range on a continuum from strictly annual to perennial, driven by local environmental conditions. We examined the reproductive dynamics of Zostera marina beds at six sites on the Atlantic coast of Canada to characterize how life history strategies are shaped by the surrounding environment. Sites were categorized as wave protected and wave exposed, where protected sites were warm, shallow, with little water movement and muddy sediments, and exposed sites were either shallow or deep, with cooler water and sandy sediments. While mixed life history strategies were evident at all sites, protected eelgrass beds exhibited both the highest and lowest sexual reproductive effort relative to exposed beds. These beds regularly experienced thermal stress, with higher temperature range and extended warm water events relative to exposed beds. The development of reproductive shoots were similar across sites with comparable Growing Degree-days at the beginning and end of anthesis, but the First Flowering Date was earlier at the protected warmer sites relative to exposed sites. With different reproductive shoot density among sites, seed production, seed retention, and seedling recruitment also varied strongly. Only one site, located in a warm, shallow and protected lagoon, contained a mixed life history population with a high reproductive effort (33.7%), strong seed bank, and high seedling establishment. However, a primarily perennial population with the lowest reproductive effort (0.5%) was identified at the warmest site, suggesting that conditions here could not support high sexual reproduction. Robustness of seed banks was strongly linked to reproductive shoot density, although the role of seed retention, germination and seedling survival require further investigation. Our study provides insights into one key aspect of seagrass resilience, and suggests that resilience assessments should include reproductive shoot density to inform their management and conservation.Cite this data: Vercaemer B. and Wong M. Reproductive ecology of Zostera marina L. (eelgrass) across varying environmental conditions. Published: May 2022. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/56cfea6f-aeca-47ed-94ab-c519d9e63c91

Miscellaneous events are often the result of the cumulative impact of a combination of abiotic, insect and disease agents or events. For example, Aspen decline where repeated infestations of Forest Tent Caterpillar, are combined with several seasons of prolonged drought. The Government of Ontario tracks forest damage events to help proactively manage the detrimental effects to our forests.   We monitor the threat and spread of invasive forest pest insect species in Ontario. The data is also important to the Forest Management Planning process in calculating timber volume loss within affected areas. This product requires the use of geographic information system (GIS) software.

The RVI/CVI database is derived from the CanEcumene 3.0 GDB (Eddy, et. al. 2023) using a selection of socio-economic variables identified in Eddy and Dort (2011) that aim to capture the overall state of socio-economic conditions of communities as ‘human habitats’. This dataset was developed primarily for application in mapping socio-economic conditions of communities and regions for environmental and natural resource management, climate change adaptation, Impact Assessments (IAs) and Regional Assessments (RAs), and Cumulative Effects Assessment (CEA).The RVI/CVI is comprised of five sub-indicators: 1) population change, 2) age structure, 3) education levels, 4) employment levels, and 5) real estate values. Index values are based on percentile ranks of each sub-indicator, and averaged for each community, and for three ranked groups: 1) all of Canada, 2) by province, and 3) by population size. The data covers the Census periods of 2001, 2006, 2011 (NHS), 2016, and 2021.The index is mapped in two ways: 1) as ‘points’ for individual communities (CVI), and 2) as ‘rasters’ for spatial interpolation of point data (RVI). These formats provide an alternative spatial framework to conventional StatsCan CSD framework. (For more information on this approach see Eddy, et. al. 2020).============================================================================================Eddy, B.G., Muggridge, M., LeBlanc, R., Osmond, J., Kean, C., and Boyd, E. 2023. The CanEcumene 3.0 GIS Database. Federal Geospatial Platform (FGP), Natural Resources Canada. https://gcgeo.gc.ca/viz/index-en.html?keys=draft-3f599fcb-8d77-4dbb-8b1e-d3f27f932a4bEddy B.G., Muggridge M, LeBlanc R, Osmond J, Kean C, Boyd E. 2020. An Ecological Approach for Mapping Socio-Economic Data in Support of Ecosystems Analysis: Examples in Mapping Canada’s Forest Ecumene. One Ecosystem 5: e55881. https://doi.org/10.3897/oneeco.5.e55881Eddy, B.G.; Dort, A. 2011. Integrating Socio-Economic Data for Integrated Land Management (ILM): Examples from the Humber River Basin, western Newfoundland. Geomatica, Vol. 65, No. 3, p. 283-291. doi:10.5623/cig2011-044.

The Canadian Index of Multiple Deprivation (CIMD) is an area-based index which used 2016 Census of Population microdata to measure four key dimensions of deprivation at the dissemination area (DA)-level: residential instability, economic dependency, situational vulnerability and ethno-cultural composition.Using factor analysis, DA-level factor scores were calculated for each dimension. Within a dimension, ordered scores were assigned a quintile value, 1 through 5, where 1 represents the least deprived and 5 represents the most deprived.The CIMD allows for an understanding of inequalities in various measures of health and social well-being. While it is a geographically-based index of deprivation and marginalization, it can also be used as a proxy for an individual. The CIMD has the potential to be widely used by researchers on a variety of topics related to socio-economic research. Other uses for the index may include: policy planning and evaluation, or resource allocation.

A Linear Safety Feature is one of a number of various appliances/appurtenances that have been installed or constructed either alongside or as an integral part of the road infrastructure to reduce the severity or potential of accidents. It is a Linear feature

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. Canada's conserved areas indicators report the amount and proportion of Canada's terrestrial (land and freshwater) and marine area that is recognized as conserved. Well-managed conserved areas are one way to protect wild species and their habitats for present and future generations. Habitat conservation is a measure of human response to the loss of biodiversity and natural habitat. As the area conserved in Canada increases, more lands and waters are withdrawn from direct human development stresses, thereby contributing to biodiversity conservation and improving the health of ecosystems. In turn, healthy ecosystems provide benefits such as clean water, mitigation of climate change, pollination and improved human health. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Canadian Index of Multiple Deprivation (CIMD) is an area-based index which used 2021 Census of Population microdata to measure four key dimensions of deprivation at the dissemination area (DA)-level: residential instability, economic dependency, situational vulnerability and ethno-cultural composition.Using factor analysis, DA-level factor scores were calculated for each dimension. Within a dimension, ordered scores were assigned a quintile value, 1 through 5, where 1 represents the least deprived and 5 represents the most deprived.The CIMD allows for an understanding of inequalities in various measures of health and social well-being. While it is a geographically-based index of deprivation and marginalization, it can also be used as a proxy for an individual. The CIMD has the potential to be widely used by researchers on a variety of topics related to socio-economic research. Other uses for the index may include: policy planning and evaluation, or resource allocation.*** Correction October 22, 2024 ***A correction has been made to the variables in the following downloadable 2021 CIMD index datasets : Canada, Atlantic, Quebec, Ontario, Prairies, and British-Columbia. This correction impacts all the data in these datasets.

DEPRECATED: During a declared emergency event, this dataset will include the communities affected by Evacuation Order Orders and Alerts, which represents the populated communities and First Nations in the province, and their current evacuation status.

A measure of the intrinsic susceptibility of an aquifer representing the tendency or likelihood for contaminants to reach a specified position in the groundwater system after introduction at some location above the uppermost aquifer. The method used to create the dataset is described in the metadata associated with the dataset. The dataset is a general assessment of the vulnerability of the hydrogeological unit considered as a whole. It features the local and regional qualifiers in a controlled vocabulary list referring to the extent where the vulnerability value is valid. Because the vulnerability is assessed using contextual indices linked to the regional hydrogeological settings, it is very unlikely to have an homogeneous range of data throughout the various hydrogeologic units across the country for this dataset. Hence, the vulnerability dataset will not qualify as an homogeneous dataset. A more generic reclassification using for examples three vulnerability classes could then be used to solve this problem. Each sub layers used to create the global vulnerability index can be provided along with the final vulnerability index map.