The RFI identifies areas of land and water encircling a recreation feature or combination of features that support, or have the potential to support, one or more recreation activities. These areas are rated for their significance or importance to recreation and for their sensitivity to alteration

The Road Features Inventory spatial layer shows all highways under the administration and control of BC MoT for which the Ministry has maintenance responsibility

This data series represents the volumetric soil moisture (percent saturated soil) for the surface layer (<5 cm). The data is created daily and is averaged for the ISO standard week and month. The data is produced from passive microwave satellite data collected by the Soil Moisture and Ocean Salinity (SMOS) satellite and converted to soil moisture using version 6.20 of the SMOS soil moisture processor.The data are produced by the European Space Agency and obtained under a Category 1 proposal for Level 2 soil moisture data. The data are gridded to a resolution of 0.25 degrees. Data quality flags have been applied to remove areas where rainfall is present during the acquisition, where snow cover is detected and when Radio Frequency Interference (RFI) is above an acceptable threshold.

The Automatic Identification System (AIS) is a global, satellite-based and terrestrial-based ship tracking system that uses shipborne equipment to remotely track vessel identification and positional information and is typically required on vessels of 300 gross tonnage or more on an international voyage, of 500 gross tonnage or more not on an international voyage, and passenger ships of all sizes. AIS tracking technologies are primarily used in support of real-time maritime domain awareness and for maritime security and safety of life at sea. This report describes a geographic information system (GIS) analysis of 2019 AIS data to produce yearly and monthly vessel density maps of all vessel classes combined and yearly density maps of each vessel class. The year 2019 was selected to portray shipping densities in a pre-COVID 19 pandemic depiction of the maritime transport sector in the Northwest Atlantic. Vessel density map applications include use in spatial analysis and decision support for marine spatial planning. In 2023 the process was applied to the years 2013 through to 2022 and were made available using the same processes that were applied to the original 2019 datasets.

A Sign is a lettered board, message or other display which includes all regulatory, warning, guide, informational, advisory, construction and maintenance and route markers, but excluding electronically controlled messages/displays. It is a Point feature

The Automatic Identification System (AIS) is a global, satellite-based and terrestrial-based ship tracking system that uses shipborne equipment to remotely track vessel identification and positional information and is typically required on vessels of 300 gross tonnage or more on an international voyage, of 500 gross tonnage or more not on an international voyage, and passenger ships of all sizes. AIS tracking technologies are primarily used in support of real-time maritime domain awareness and for maritime security and safety of life at sea. This report describes a geographic information system (GIS) analysis of 2019 AIS data to produce yearly and monthly vessel density maps of all vessel classes combined and yearly density maps of each vessel class. The year 2019 was selected to portray shipping densities in a pre-COVID 19 pandemic depiction of the maritime transport sector in the Northwest Atlantic. Vessel density map applications include use in spatial analysis and decision support for marine spatial planning. In 2023 the process was applied to the years 2013 through to 2022 and were made available using the same processes that were applied to the original 2019 datasets.

The Automatic Identification System (AIS) is a global, satellite-based and terrestrial-based ship tracking system that uses shipborne equipment to remotely track vessel identification and positional information and is typically required on vessels of 300 gross tonnage or more on an international voyage, of 500 gross tonnage or more not on an international voyage, and passenger ships of all sizes. AIS tracking technologies are primarily used in support of real-time maritime domain awareness and for maritime security and safety of life at sea. This report describes a geographic information system (GIS) analysis of 2019 AIS data to produce yearly and monthly vessel density maps of all vessel classes combined and yearly density maps of each vessel class. The year 2019 was selected to portray shipping densities in a pre-COVID 19 pandemic depiction of the maritime transport sector in the Northwest Atlantic. Vessel density map applications include use in spatial analysis and decision support for marine spatial planning. In 2023 the process was applied to the years 2013 through to 2022 and were made available using the same processes that were applied to the original 2019 datasets.

The Automatic Identification System (AIS) is a global, satellite-based and terrestrial-based ship tracking system that uses shipborne equipment to remotely track vessel identification and positional information and is typically required on vessels of 300 gross tonnage or more on an international voyage, of 500 gross tonnage or more not on an international voyage, and passenger ships of all sizes. AIS tracking technologies are primarily used in support of real-time maritime domain awareness and for maritime security and safety of life at sea. This report describes a geographic information system (GIS) analysis of 2019 AIS data to produce yearly and monthly vessel density maps of all vessel classes combined and yearly density maps of each vessel class. The year 2019 was selected to portray shipping densities in a pre-COVID 19 pandemic depiction of the maritime transport sector in the Northwest Atlantic. Vessel density map applications include use in spatial analysis and decision support for marine spatial planning. In 2023 the process was applied to the years 2013 through to 2022 and were made available using the same processes that were applied to the original 2019 datasets.

The Automatic Identification System (AIS) is a global, satellite-based and terrestrial-based ship tracking system that uses shipborne equipment to remotely track vessel identification and positional information and is typically required on vessels of 300 gross tonnage or more on an international voyage, of 500 gross tonnage or more not on an international voyage, and passenger ships of all sizes. AIS tracking technologies are primarily used in support of real-time maritime domain awareness and for maritime security and safety of life at sea. This report describes a geographic information system (GIS) analysis of 2019 AIS data to produce yearly and monthly vessel density maps of all vessel classes combined and yearly density maps of each vessel class. The year 2019 was selected to portray shipping densities in a pre-COVID 19 pandemic depiction of the maritime transport sector in the Northwest Atlantic. Vessel density map applications include use in spatial analysis and decision support for marine spatial planning. In 2023 the process was applied to the years 2013 through to 2022 and were made available using the same processes that were applied to the original 2019 datasets.

The objective of the Independent Environmental Monitoring Program (IEMP) is to build Indigenous and public trust in the Canadian Nuclear Safety Commission's (CNSC) regulation of the nuclear industry, via an independent, technical and accessible environmental sampling program around nuclear facilities, while using CNSC resources effectively and efficiently. For more information: www.Nuclearsafety.gc.ca/IEMP