## Get data on boundaries of local climatic areas used for forest fire weather forecasting. This dataset shows the boundaries of administrative areas used for forest fire weather forecasting. North of the French River, boundaries correspond closely with Environment Canada’s areas for public weather forecasting. South of the French River, 25 Environment Canada areas are combined into six larger areas for provincial forecasting.

Drainage basins of Manitoba.Hydrologic drainage basins found within Manitoba. The Assiniboine River basin is divided to indicate the Shellmouth Reservoir subbasin, to better illustrate local impacts and conditions. Basin names are in English and French. 

This dataset was developed for inclusion in EXTECH IV Athabasca uranium multidisciplinary study project geoscience database.This dataset was developed for inclusion in the EXTECH IV Athabasca uranium multidisciplinary study project geoscience database. It includes the Athabasca Basin paleocurrent directions and was compiled from paper field data sheets. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule. 

The dataset contains data for placer watersheds locations. The dataset covers 18 watersheds within the Yukon Territory. The following watersheds form the principle boundaries of the dataset: Big Creek, Big Salmon River, Forty Mile River Indian River, Klondike River, Mayo River McQuesten River, Nisutlin River, Nordenskiold River Pelly River, Sixty Mile River, Southern Lakes (Yukon) Stewart River, White River\*, Yukon River North Yukon River South, Alsek River, Liard River \*Note - A small portion of the headwaters of the Tanana River (Yukon) watershed is associated within the boundaries of the White River watershed .Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Canadian Nuclear Safety Commission (CNSC) is publishing a database with environmental monitoring results collected as part of the Eastern Athabasca Regional Monitoring Program. The samples are collected near communities located in northern Saskatchewan.

This dataset represents lithogeochemistry of Saskatchewan samples.This dataset represents lithogeochemistry of Saskatchewan samples. This dataset represents the exhaustive mapping and sampling program of the Athabasca Group between 1975 and 1981 by the Saskatchewan Geological Survey (SGS), the results of which are contained in Ramaekers (1990). These samples are now stored at the Ministry of Energy and Resources, Subsurface Geological Laboratory in Regina, Saskatchewan. A selection of these samples was chosen to help characterize the background geochemical signature of the Athabasca Group and to identify anomalous regions. A total of 837 samples were chosen. All samples in this data set were processed at the Geoanalytical Laboratories at the Saskatchewan Research Council (SRC) in Saskatoon, Saskatchewan, an ISO/IEC 17025:2005 certified facility (i.e., meets the General Requirements for the Competence of Mineral Testing and Calibration Laboratories). Samples were crushed, split, agate ground, and then run with Sandstone Exploration Package ICPMS 1. The package produces three separate analysis types: inductively coupled plasma mass spectroscopy (ICP MS) partial digestion for trace elements; ICP MS total digestion for trace elements; and ICP–Optical Emission Spectrometry (ICP–OES) total digestion for major and minor elements. Details and detection limits are available on the SRC’s website. ICP total digestion: a 0.250 g pulp is gently heated in a mixture of ultrapure HF/HNO3/HClO4until dry and the residue dissolved in dilute ultrapure HNO3; ICP MS total digestion: a 0.250 g pulp is gently heated in a mixture of ultrapure HF/HNO3/HClO4until dry and the residue dissolved in dilute ultrapure HNO3; ICP MS partial digestion: a 2.00 g pulp is digested with 2.25 ml of 8:1 ultrapure HNO3:HCl for 1 hour at 95° C; Detection limits are from the SRC's 2011 Analytical Fee Schedule; null values indicate that elements are below the detection limit. NOTE: Attribute data headings ending with TD indicate Total Digestion, those ending with PD indicate Partial Digestion. Majors oxides are in percent; all other elements are in ppm. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule. 

The Copper Redhorse (Moxostoma hubbsi) is the only fish whose distribution is exclusively restricted to Quebec. This range is restricted even further to the St. Lawrence River and some of its tributaries.This layer represents the Copper Redhorse critical habitat defined by the analysis of available knowledge and a scientific advice.PurposeThe Copper Redhorse population is in decline due to several threats like habitat degradation, construction of dams, contaminants, exotic or introduced species, recreational activities, commercial fishery, and low water levels. Furthermore, certain biological characteristics of the Copper Redhorse contribute to its vulnerability. The Copper Redhorse population was officialy listed as endangered in Schedule I of the Species at Risk Act in December 2007.Additional InformationCritical habitat for the Copper Redhorse has been identified to the extent possible, based on the best available information. Two workshops held in 2009 and 2010 by Fisheries and Oceans Canada and the Ministère des Ressources Naturelles et de la Faune du Québec, allowed to review the information and take note of the new data to identify habitat use by the Copper Redhorse in the St. Lawrence and Richelieu rivers and later in the Rivière des Prairies and Rivière des Milles Îles. Adult feeding habitat in the St. Lawrence River between Lake Saint-Louis and Lake Saint-Pierre, was identified using modeling based on the telemetric monitoring of habitat use and on twelve habitat variables (for example: depth, current velocity, vegetation density). Also, recent telemetry and historic data confirmed the use of the lower stretches of the Rivière des Prairies and Rivière des Mille Îles. Critical adult feeding habitat is consequently identified as habitat in the fluvial reach between Montreal and Sorel presenting favorable characteristics for the copper redhorse, used in the model.DFO. 2012. Recovery Strategy for the Copper Redhorse (Moxostoma hubbsi) in Canada. Species at Risk Act Recovery Strategy Series. Fisheries and Oceans Canada, Ottawa. xi+60 pp.https://www.registrelep-sararegistry.gc.ca/document/doc1565p/ind_e.cfm

Baseline of a creek or river means a traverse line following the general direction of the centre bottom lands of the valley of the creek or riverDistributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Riparian Area Assessment of the Upper, Mid and Lower Pembina River Watersheds project focused on assessing riparian habitat along lake, creek, stream and river shorelines. This dataset was created for the Athabasca Watershed Council as a part of a large scale riparian area assessment in Alberta. The overall goal of this project was to quantify and characterize the intactness of riparian management areas in the Pembina River watersheds, and to further assess pressure on riparian system function by evaluating land use and land cover within local catchments immediately adjacent to the waterbodies included in this study.

This dataset represents the interpreted Magnetic Domains of the Province of Saskatchewan.This dataset represents the interpreted Magnetic Domains of the Province of Saskatchewan. Regions of like magnetic intensity and/or structural texture have been interpreted from new aeromagnetic data collected for the Athabasca Basin and surrounding environs. Interpretations were made using a variety of presentations of the primary data including total magnetic intensity (TMI), 1st vertical derivative of TMI, horizontal derivative of TMI, automatic gain control of TMI and tilt derivative. Where possible, the interpreted domains extend the aeromagnetic response from older rocks that flank the basin beneath rocks of the Athabasca Group. The data was created as a file geodatabase feature class and output for public distribution.  **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.