Rouyn-Noranda cycling network**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

A research survey on snow crab (Chionoecetes opilio) was conducted from July 7 to July 26, 2019 in the Estuary St. Lawrence River between Forestville, Baie-Comeau and Matane. The main objective of this survey was to assess the abundance of snow crab and benthic species associated with snow crab habitat. Only data for benthic species associated with snow crab habitat are presented in this dataset.Data were collected according to a fixed station sampling design consisting of 66 stations, between 31 and 279 meters depth. Specimens were collected using a beam trawl with a total width of 2.8 meters and a total height of 0.76 meters. The codend was lined with a 16 millimeter stretched mesh net in order to harvest the small individuals. The hauls were made at a target speed of 2 knots and a target duration of 15 minutes. Start and end positions were recorded to calculate the distance traveled on each tow using the geosphere library in R. The average tow distance was approximately 25 m. The area covered at each tow was the product of the trawl opening and the distance traveled.The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "Activity_Information" file includes generic activity information, including date and location. The "occurrence_taxon" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment, contact Cedric Juillet (cedric.juillet@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "ScientificnameID" field of the occurrence file. Data quality checks were performed using the R obistools and worrms libraries. All sampling locations were spatially validated.

A research survey on snow crab (Chionoecetes opilio) was conducted from May 2006 to May 2009 in the Bay of Ste. Marguerite near Sept-Îles, Quebec. The main objective of this survey was to assess the abundance of snow crab and benthic species associated with snow crab habitat. Only data for benthic species associated with snow crab habitat are presented in this dataset.Data were collected according to a fixed station sampling design consisting of 79 stations, between 7 to 198 meters depth. Specimens were collected using a beam trawl. The codend was lined with a small stretched mesh net in order to harvest the small individuals. The hauls were made at a target duration of 15 minutes. Start and end positions were recorded to calculate the distance traveled on each tow using the geosphere library in R. The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "Activity_Information" file includes generic activity information, including date and location. The "occurrence_taxon" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment, contact Bernard Sainte-Marie (Bernard.Sainte-Marie@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "ScientificnameID" field of the occurrence file. Data quality checks were performed using the R obistools and worrms libraries. All sampling locations were spatially validated.

The Brier Island/Digby Neck area has been identified as an Ecologically and Biologically Significant Area (EBSA) by Fisheries and Oceans Canada and is one of four marine areas within the Bay of Fundy recognised by Parks Canada as of national significance for marine conservation planning. The area is representative of important outer Bay of Fundy features with significant marine mammal, bird, and benthic diversity including potentially important aggregations of sensitive benthic species such as horse mussel and sponge. Much of the information used for this recognition is now over 40 years old and should be re-validated using standardised georeferenced survey methods. As a first phase, a diver-based survey of the sublittoral habitats and associated species was conducted in August and September of 2017 for the Brier Island area. This report summarises the major sublittoral habitat types, species assemblages, and oceanographic conditions observed at 20 locations including Northwest and Southwest Ledges, Gull Rock, Peter’s Island, and Grand Passage. A total of 962 records were made of 178 taxa, consisting of 43 algae and 135 animals. Comparison with historical records largely confirmed the continued presence of unique habitats and species assemblages for which this area was initially recognised as an EBSA. Differences in species richness observed for cryptic and less known taxonomic groups such as sponges and bryozoans were attributable to changes in survey methods and knowledge. Based on these findings, additional surveys of inshore and offshore Brier Island using more quantitative methods developed for other Bay of Fundy EBSAs would further support regional MPA network planning and provide relative scales of species diversity and habitat coverage for this area.

A research survey on snow crab (Chionoecetes opilio) was conducted from July 1 to July 17, 2018 on the Lower North Shore of the Gulf of St. Lawrence between Havre-Saint-Pierre and Blanc-Sablon. The main objective of this survey was to assess the abundance of snow crab and benthic species associated with snow crab habitat. Only data for benthic species associated with snow crab habitat are presented in this dataset.Data were collected according to a fixed station sampling design consisting of 61 stations, between 46 and 230 meters depth. Specimens were collected using a beam trawl with a total width of 2.8 meters and a total height of 0.76 meters. The codend was lined with a 16 millimeter stretched mesh net in order to harvest the small individuals. The hauls were made at a target speed of 2 knots and a target duration of 10 minutes depending on seabed conditions. Start and end positions were recorded to calculate the distance traveled on each tow using the geosphere library in R. The average tow distance was approximately 25 m. The area covered at each tow was the product of the trawl opening and the distance traveled.The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "Activity_Information" file includes generic activity information, including date and location. The "occurrence_taxon" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment, contact Cedric Juillet (cedric.juillet@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "ScientificIDname" field of the occurrence file. Special cases were noted in the "commentsIdentification" field and selected specimens were confirmed with field photos. Data quality checks were performed using the R obistools and Worms libraries. All sampling locations were spatially validated.

FluWatchers is an online health surveillance system. It helps monitor the spread of flu-like illness across Canada. FluWatchers relies on Canadians to volunteer 15 seconds of their time each week to answer 2 questions about their health. To be a Fluwatcher, sign up at https://cnphi.canada.ca/fluWatcher/registerNote: Only areas where there are five or more weekly reporters are included in the map. The reported rates of cough and fever are a reflection of the surveillance data available to FluWatch at the time of production. Delays in reporting of data may cause data to change retrospectively.

Bicycle path routes.attribute:Name - Name of the bike pathTypeLane - Type of bike path**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The Canadian Hydrospatial Network (CHN) is an analysis-ready geospatial network of features that help enable the modelling of surface water flow in Canada. The six main layers and feature types are: flowlines, waterbodies, catchments, catchment aggregates, work units, and hydro nodes. Where possible the CHN is derived from high resolution source data such as Light Detection and Ranging (LiDAR) derived Digital Elevation Models (DEMs) and aerial imagery, to name a few. If existing provincial or territorial hydrographic networks meet the standards, they are incorporated into the CHN, otherwise automatic extraction methods are used on the high-resolution source data. To provide full network connectivity, if neither of these methods is possible in a region, the NHN is converted into the CHN until higher-resolution source data is available.Additional value-added attributes are included in the CHN to aid modelling, such as stream order and reach slope. The CHN physical model and features are also closely aligned and harmonized with the USGS 3DHP hydrographic network, which aids trans-border modelling. Where possible geonames (i.e. toponyms) are also added.The CHN is produced and disseminated by hydrologically connected geographic areas called work units. Work units can contain just one watershed, several small adjacent watersheds outletting into a large body of water, or be one of many parts of a larger watershed. In all cases, the features of a work unit are hydrologically connected. This is a more natural approach to data delivery, in comparison to data that is split into tiles. A generalized work unit index file is provided in the downloads to help users decide which files to download.For more information on the CHN please visit the project webpage: https://natural-resources.canada.ca/canadian-hydrospatial-network

The Canada Basemap Transportation (CBMT) is a raster tile service that provides spatial reference context with an emphasis on transportation networks across Canada. It is designed especially for use as a background layer in a web mapping application or geographic information system (GIS). Access: Access is free of charge under the terms of the Open Government Licence - Canada.Data Sources: Data for the CBMT is sourced from the following datasets:- Topographic data of Canada – CanVec Series- Official names from the Canadian Geographical Names Database (CGNDB).Projections:- Data is provided in the EPSG:3978 (NAD83 Canada Atlas Lambert) projected coordinate system.- Data is provided in the EPSG:3857 (WGS84 Pseudo-Mercator) projected coordinate system.Geographic Coverage: - The CBMT in the EPSG:3857 has complete coverage of the world, with full datasets in Canada and only partial data in other parts of the world including boundaries, Country Names, and major cities.- The CBMT in the EPSG:3978 covers the entire geographic area of Canada and some major transportation routes and cities in the northern States of the USA.Additional Versions: - The CBMT is available as a dynamic service (WMS) or a tiled service (ESRI REST and WMTS). - A geometry-only version (CBMT GEOM) and a text-only version (CBMT TXT) are available. - French versions of the basemap are accessible via the Carte de base du Canada - Transport (CBCT).

The Canadian Geographical Names Data Base (CGNDB) is the authoritative national database of Canada's geographical names. The purpose of the CGNDB is to store place names and their attributes that have been approved by the Geographical Names Board of Canada (GNBC), the national coordinating body responsible for standards and policies on place names. The CGNDB is maintained by Natural Resources Canada, through the Canada Centre for Mapping and Earth Observation. The geographic extent of the CGNDB is the Canadian landmass and water bodies; the temporal extent is from 1897 to present. This dataset is extracted from the CGNDB on a weekly basis, and consists of current officially approved names, feature type, coordinates of the feature, decision date, source, and other attributes. The output file formats for this product are: text (CSV), Shape (SHP), and Keyhole Markup Language (KML).Content advisory: The Canadian Geographical Names Database contains historical terminology that is considered racist, offensive and derogatory. Geographical naming authorities are in the process of addressing many offensive place names, but the work is still ongoing. For more information, please contact the GNBC Secretariat.