Monitoring activities have collected bulk suspended sediment samples using continuous flow centrifuges and Phillips Tube samplers in the Lower Athabasca River and tributaries respectively. Further, in the absence of pre-development monitoring for this region, high fidelity dated lake sediment cores were used to assess the natural range in contaminant deposition to this region and to obtain a historical perspective of contaminant loadings. All sediments (suspended river and lake cores) have been analyzed in the laboratory for sediment quality variables as per Appendix B in the Integrated Monitoring Plan (cores were also analyzed for paleo indicators of ecosystem health such as diatoms). In addition, as the Lower Athabasca river bed sediments are known to shift and migrate downstream, bathymetric maps of the bed-channel morphology over time was also completed. This will allow for estimates of bed sediment transport downstream for the period of survey, and be useful in calibration/validation of sediment and contaminant numerical transport models.

Fisheries and Oceans Canada (DFO) Maritime Science Branch has collected grain size data from sediment and water column samples using bottle samples, sediment cores, and sediment grabs as part of numerous research projects not only in the Atlantic provinces, but also worldwide. The data collected by DFO focuses on the fine grained (<1mm) particles as these are both a source of food and means of contaminant transport. Grain size data are used to study the fate and distribution of complimentary chemistries like heavy metals, pesticides, hydrocarbons, aquaculture waste as well as a variety of physical processes such as the resuspension and transport of sediment.

This dataset represents Lake Sediment Geochemical Analyses for the province of Saskatchewan.This dataset represents Lake Sediment Geochemical Analyses for the province of Saskatchewan. During the intense level of activity directed toward the exploration for uranium in the 1970s, the Saskatchewan Geological Survey and the Geological Survey of Canada funded the collection of several thousand samples of sediments and waters from lakes around the Athabasca Sandstone. All sediment samples were analyzed for U, Cu, Ni, Pb, Zn, Co, Fe and Mn. Selected samples were analyzed for a wide range of additional elements. All lake waters were analyzed for U, F-, and pH, and several hundred samples were analyzed for additional elements and parameters. The Summary Table that precedes this text shows the numbers of samples and elements, and the source of data from which the 8,939 samples listed in the 9 Tables are derived. Over 20 years ago the data in these listings were coded into the Saskatchewan Geological Survey’s ‘Geochemical Data File’, designed in the 1970s (Dunn, 1978b, 1979), and developed by SaskComp (the computer programming department of the Saskatchewan government at that time). The only database listed in the present report that was not in the Geochemical Data File was GSC Open File #779, jointly produced by the SGS and GSC (Coker and Dunn, 1981, 1983) and containing data from detailed surveys of the IAEA/NEA Athabasca Test Area (adjacent to Wollaston Lake). The old Geochemical Data File was state-of-the-art at the time, and data have been available for public scrutiny since inception in 1977. Demonstrations of the File were given at the SGS Open House meetings in 1977 and 1978. The explosive development of personal computers during the past 20 years has made the original Geochemical Data File something of a dinosaur, and the data have been difficult to access and manipulate. The present data file is a compilation that has resulted from detailed evaluation, streamlining, editing and breakdown of the data into simplified Excel files that can easily be manipulated by anyone with a modest knowledge of computers. These data are of historic value and their re-evaluation could assist in current uranium exploration programs. Of particular value is their use in environmental studies, since they represent a 1970s snapshot of the chemistry of the northern Saskatchewan environment prior to mine developments. At the start of sample collection in 1975 Key Lake had not been drained and the only mine site was the pit at Rabbit Lake. This compilation has divided the data into 9 tables, each presented as a shape file. There are 6 shape files of lake sediment data (1LS - 6LS) and 3 shape files of lake water data (4LW - 6LW). Lake water samples were from the same sites as the lake sediments listed in files 4LS - 6LS, hence they have been given the same numeric designation. The data are mostly compatible among the Tables. However, although analytical methods and quality control protocols were similar, they were sufficiently different to warrant treating the data as separate listings. For any regional plotting of data extracted from all Tables these differences should be considered when interpreting distribution patterns. Of particular relevance is that all sediment samples were analyzed for U by neutron activation, with the exception of 158 samples (Table 2LS) where determinations were by fluorometry. These data sets should be fully compatible, because the two techniques provide similar values. Comparison of U data from sediment samples collected and analyzed over four years, then reanalyzed as one batch has shown excellent precision and accuracy (Coker and Dunn, 1981). All U in water determinations were by fluorometry, and all F- by selective ion electrode. Loss on ignition (LOI) data were determined by ignition at 500o C for 4 hours. Table 1LS This data set comprises samples collected by SGS between 1975 and 1978. Samples were digested in aqua regia and all trace elements, except U (see above), were determined by atomic absorption spectrometry (AA).  **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.

This record contains information on the samples collected and the intended parameters for analysis from sediment cores collected as part of this project including bacteria, chemistry, stable isotopes, fatty acids, or meiofauna.

This record contains results from chemical analysis including suspended nitrogen (mg/g), suspended carbon (mg/g), and phosphorus (mg/g) based on dry weight sediment samples collected in the Beaufort Sea.

This dataset is the digital compilation of Lake Sediment Analyses was done by the GSC for the Precambrian Shield area of Saskatchewan.This dataset represents the water and sediment geochemistry for select lakes in Saskatchewan. This product was produced by the Geological Survey of Canada as Open file 7746. During the intense level of activity directed toward the exploration for uranium in the 1970s, the Saskatchewan Geological Survey and the Geological Survey of Canada funded the collection of several thousand samples of sediments and waters from lakes around the Athabasca Sandstone. All sediment samples were analyzed for U, Cu, Ni, Pb, Zn, Co, Fe and Mn. Selected samples were analyzed for a wide range of additional elements. All lake waters were analyzed for U, F-, and pH, and several hundred samples were analyzed for additional elements and parameters. The Summary Table that precedes this text shows the numbers of samples and elements, and the source of data from which the 8,939 samples listed in the 9 Tables are derived. Over 20 years ago the data in these listings were coded into the Saskatchewan Geological Survey’s ‘Geochemical Data File’, designed in the 1970s (Dunn, 1978b, 1979), and developed by SaskComp (the computer programming department of the Saskatchewan government at that time). The only database listed in the present report that was not in the Geochemical Data File was GSC Open File #779, jointly produced by the SGS and GSC (Coker and Dunn, 1981, 1983) and containing data from detailed surveys of the IAEA/NEA Athabasca Test Area (adjacent to Wollaston Lake). The old Geochemical Data File was state-of-the-art at the time, and data have been available for public scrutiny since inception in 1977. Demonstrations of the File were given at the SGS Open House meetings in 1977 and 1978. The explosive development of personal computers during the past 20 years has made the original Geochemical Data File something of a dinosaur, and the data have been difficult to access and manipulate. The present data file is a compilation that has resulted from detailed evaluation, streamlining, editing and breakdown of the data into simplified Excel files that can easily be manipulated by anyone with a modest knowledge of computers. These data are of historic value and their re-evaluation could assist in current uranium exploration programs. Of particular value is their use in environmental studies, since they represent a 1970s snapshot of the chemistry of the northern Saskatchewan environment prior to mine developments. At the start of sample collection in 1975 Key Lake had not been drained and the only mine site was the pit at Rabbit Lake. This compilation has divided the data into 9 tables, each presented as a shape file. There are 6 shape files of lake sediment data (1LS - 6LS) and 3 shape files of lake water data (4LW - 6LW). Lake water samples were from the same sites as the lake sediments listed in files 4LS - 6LS, hence they have been given the same numeric designation. The data are mostly compatible among the Tables. However, although analytical methods and quality control protocols were similar, they were sufficiently different to warrant treating the data as separate listings. For any regional plotting of data extracted from all Tables these differences should be considered when interpreting distribution patterns. Of particular relevance is that all sediment samples were analyzed for U by neutron activation, with the exception of 158 samples (Table 2LS) where determinations were by fluorometry. These data sets should be fully compatible, because the two techniques provide similar values. Comparison of U data from sediment samples collected and analyzed over four years, then reanalyzed as one batch has shown excellent precision and accuracy (Coker and Dunn, 1981). All U in water determinations were by fluorometry, and all F- by selective ion electrode. Loss on ignition (LOI) data were determined by ignition at 500o C for 4 hours. Table 1LS This data set comprises samples collected by SGS between 1975 and 1978. Samples were digested in aqua regia and all trace elements, except U (see above), were determined by atomic absorption spectrometry (AA). **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.

All lake polygons for the province

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, sediment trap data and particle capture of carbon, nitrogen, and silicon.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations in the North Pacific.The data links below are only a representative sample of the entire collection. If you require more data, please send your request to the data contact.

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, and particle capture of carbon, nitrogen, and silicon as well as sediment trap, ice drift and ice draft data.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations ranging from the North Pacific, the Beaufort Sea, and across the Canadian Arctic Archipelago to Baffin Bay.

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, and particle capture of carbon, nitrogen, and silicon. Also included are sediment trap, ice drift and ice draft data.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations ranging from the Beaufort Sea, and across the Canadian Arctic Archipelago to Baffin Bay.The data links below are only a representative sample of the entire collection. If you require more data, please send your request to the data contact.