Home /Search
Search datasets
We have found 229 datasets for the keyword "sablefish catch and effort". You can continue exploring the search results in the list below.
Datasets: 105,253
Contributors: 42
Results
229 Datasets, Page 1 of 23
Sablefish Standardized Trap Survey – Mainland Inlets
Fishing event (e.g., day, time, location, catch effort), and associated biological data from the Standardized Inlet Survey component of the annual Sablefish Research and Assessment Survey on the British Columbia coast.IntroductionDFO and the Canadian Sablefish Association undertake a collaborative fishery-independent annual research survey under a joint agreement. The survey employs longline trap gear to obtain catch rate data, gather biological samples, capture oceanographic measurements, and collect tag release and recapture data.Data summaries are provided here for standardized sets conducted at fixed stations within mainland inlets. The design of the sablefish survey has developed over time by incorporating and discontinuing components, including individual experimental studies (not available on OpenData). This Standardized Inlet Survey component differs in methodology from the other two survey components: (1) Offshore stratified random survey (2003 – present; available on OpenData using link below), and(2) Standardized trap survey – offshore indexing and offshore tagging (1990 – 2010; not yet available on OpenData). For the Standardized Inlet Survey, sets are allocated to five specific polygons in each of the following four inlet areas: Portland Inlet, Gil Island, Finlayson Channel, and Dean/Burke Channel. All four inlets were surveyed consistently between 2003 and 2019. No inlets were surveyed in 2020, and a single inlet was surveyed each year since 2021. Survey procedures are standardized and documented in Canadian Technical Reports of Fisheries and Aquatic sciences.Data tables provided for the Standardized Inlet Survey include (i) Effort, (ii) Catch, and (iii) Biological Information.Inlet EffortThis table contains information about annual survey trips and fishing events (sets). Trip-level information includes the year the survey took place, a unique trip identifier, the vessel that conducted the survey and the trip start and end dates (the dates the vessel was away from the dock conducting the survey). Set-level information includes the inlet name, date, time, location and depth that fishing took place, soak time, and number of traps deployed. All successful fishing events are included, where successful sets are those that met survey design specifications.Inlet CatchThis table contains the catch information from successful fishing events. Catch is identified to species or to the lowest taxonomic level possible. Catch is recorded as fish counts and / or weight. The unique trip identifier and set number are included so that catches can be related to the fishing event information (including capture location) for each set.Inlet Biological InformationThis table contains the biological data for sampled catches. Data may include any or all of length, weight, sex, maturity and age. Most of the sampled catch is Sablefish; however, some biological information has been collected for other species. Age structures are collected and are archived until required for analyses; therefore, all existing structures have not been aged. Tissue samples (usually a fin clip) may be collected for genetic (DNA) analysis for specific species. Tissue samples may be archived until required for analysis; for more information please see the data contacts. The unique trip identifier and set number are included so that samples can be related to the fishing event and catch information.
Sablefish Offshore Stratified Random Trap Survey
Fishing event data (e.g. year, date, time, location, catch and effort) and associated biological data from the Offshore Stratified Random Survey component of the annual Sablefish Research and Assessment Survey on the British Columbia coast.IntroductionDFO and the Canadian Sablefish Association (CSA) collaborate to undertake an annual fishery-independent research survey under a joint agreement. The survey employs longline trap gear to obtain catch rate data, gather biological samples, capture oceanographic measurements, and collect tag release and recapture data.Data summaries provided here are for the offshore stratified random sampling design (StRS) component of the survey, which has been conducted annually since 2003. The design of the sablefish survey has developed over time by incorporating and discontinuing components, including individual experimental studies (not available on OpenData). This StRS Survey component differs in methodology from the other two survey components: (1) Standardized trap survey – mainland inlets (1994-present; available on OpenData using link below), and (2) Standardized trap survey – offshore indexing and offshore tagging (1990 – 2010; not yet available on OpenData). The Sablefish offshore stratified random trap survey (StRS) follows a depth and area stratified random sampling design. The survey area is partitioned into five spatial strata (S1 to S5) and three depth strata (RD1 to RD3) for a total of 15 strata. The five spatial strata are S1 (South West Coast Vancouver Island or SWCVI), S2 (North West Coast Vancouver Island or NWCVI), S3 (Queen Charlotte Sound or QCS), S4 (South West Coast of Haida Gwaii or SWCHG), and S5 (North West Coast of Haida Gwaii or NWCHG). The three depth strata are 100-250 fathoms (RD1), 250-450 fathoms (RD2), and 450-750 fathoms (RD3). The area within each of the 15 strata are sectioned into 2 km x 2 km grid cells or ‘fishing blocks’ from which set locations are randomly chosen each year. Survey procedures are standardized and documented in Canadian Technical Reports of Fisheries and Aquatic sciences.Data tables provided for the offshore stratified random survey include (i) effort, (ii) catch, (iii) biological information, (iv) the sampling frame from which blocks are selected for sampling each year, and (v) the calculated coastwide Sablefish biomass index. StRS EffortThis table contains information about the annual survey trips and fishing events (sets). Trip-level information includes the year the survey took place, a unique trip identifier, the vessel that conducted the survey and the trip start and end dates (the dates the vessel was away from the dock conducting the survey). Set-level information includes the date, time, location and depth that fishing took place, the survey spatial and depth strata for the set, reason for the set, soak time, number of traps deployed and number of traps fished. All successful fishing events are included, i.e., those sets that conformed to specified survey standards.StRS CatchThis table contains the catch information from successful fishing events. Catches are identified to species or to the lowest taxonomic level possible. Catches are recorded as fish counts and / or weight. The unique trip identifier and set number are included so that catches can be related to the fishing event information (including capture location).StRS Biological InformationThis table contains the biological data for sampled catches. Data may include any or all of length, weight, sex, maturity, and age. Most of the sampled catch is Sablefish; however, some biological information has been collected on Rockfish, Flatfish and other Roundfish species in some years. Age structures are collected and are archived until required for analyses; therefore, all existing structures have not been aged at this time. Tissue samples (usually a fin clip) may be collected for genetic (DNA) analysis for specific species. Genetic samples may be archived until required for analyses; for more information, please see the data contacts. The unique trip identifier and set number are included so that samples can be related to the fishing event and catch information.Sample FrameThis table contains a list of all of the 2km x 2km grid cells or ‘fishing blocks’ that are part of the stratified random sampling frame. A subset of blocks are randomly selected for sampling each year from this list. For each grid cell, the corresponding depth and spatial strata ID is included. This sample frame can be used to calculate design-based abundance indices for the survey.StRS Biomass IndexThis table contains a coastwide relative biomass index for Sablefish based on the annual StRS survey. Stratified random sampling mean index values and 95% confidence intervals are calculated by year using the classical survey stratified random sampling estimator (Cochran 1977) and the number of possible sampling units per stratum provided by Wyeth et al. (2007). The relative biomass index has been input to the operating model and management procedure used to provide management advice for BC Sablefish since 2011 (Cox et al. 2011).
Pacific Region Commercial Salmon Fishery In-season Catch Estimates
The Fishery Operations System (FOS) is the Department of Fisheries and Oceans Canada’s (DFO) centralized Oracle database that holds commercial salmon fishery catch, effort and biological data. The FOS database was built in 2001 and continues to be the current repository for all data pertaining to DFO’s Pacific Region Commercial Salmon Logbook program.The Commercial Salmon Logbook program was initiated in 1998 with fleet wide participation made mandatory during the 2001 season. The program requires all commercial salmon fishers to record their daily catch and effort information in a harvest logbook and to subsequently report it to DFO using a service provider within deadlines defined in the conditions of licence. A portion of the information collected from the logbook program contains fisher personal information and is therefore protected and un-releasable. Fishery Managers use the fisher reported catch and effort, in addition to information collected from other sources such as overflights, to calculate in-season catch estimates.NOTES:- This report contains ONLY commercial catch estimates; it DOES NOT include test fishing, recreational or First Nations data.- These figures are preliminary in-season catch estimates and are subject to change.- Consult the applicable Fishery Manager or Biologist as to the status of particular catch estimates- All catch estimates are reported in pieces (numbers of fish).- Catch estimates include adults and jacks combined.----------------------------------------------------------Pacific Fishery Management Areas (PFMAs):https://www.pac.dfo-mpo.gc.ca/fm-gp/maps-cartes/areas-secteurs/index-eng.html----------------------------------------------------------DFO Integrated Fisheries Management Plans (IFMP):http://www.pac.dfo-mpo.gc.ca/fm-gp/ifmp-eng.html ----------------------------------------------------------DFO Salmon Catch Statistics and Logbook Reports:http://www.pac.dfo-mpo.gc.ca/stats//smon/index-eng.htm----------------------------------------------------------Pacific Region Commercial Salmon Fishery Post-Season Catch Estimates, 1996 - 2004:https://open.canada.ca/data/en/dataset/82c7eaa7-7078-4d38-a880-25d53f00c579----------------------------------------------------------
Mapping Inshore Lobster Landings and Fishing Effort on a Maritimes Region Statistical Grid (2012–2014)
Fisheries landings and effort mapping of the inshore lobster fishery on the DFO Maritimes Region statistical grid (2012-2014). This report describes an analysis of Maritimes Region inshore lobster logbook data reported at a grid level, including Bay of Fundy Grey Zone data reported at the coordinate level. Annual and composite (2012–2014) grid maps were produced for landings, number of license-days fished, number of trap hauls, and the same series standardized by grid area, as well as maps of catch weight per number of trap hauls as an index of catch per unit effort (CPUE). Spatial differences in fishing pressure, landings, and CPUE are indicated, and potential mapping applications are outlined. Mapping the distribution and intensity of inshore lobster fishing activity has management applications for spatial planning and related decision support. The lack of region-wide latitude and longitude coordinates for lobster effort and landings limits the utility of commercial logbook data for marine spatial planning purposes.
Fisheries monitoring and biological data of the Yellowknife River Cisco (Coregonus artedi) population, 1999–2020
PURPOSE:"Biological, relative abundance, and environmental data have been collected from the Yellowknife River Cisco population that can be used to inform fisheries management decision-making. Under the conditions of a commercial licence issued under the New Emerging Fisheries Policy, licence holders are required to record catch and biological information to support the assessment of the feasibility and sustainability of the fishery over time, and potential advancement in the stages of a developing fishery. In addition to the information collected from the commercial harvest (fishery-dependent), a fishery-independent sampling and snorkel survey program was conducted with the objective of collecting additional biological, observational, and environmental data during the fall spawning run.The objective of this report is to compile available data from fishery-dependent and fishery-independent sampling of adfluvial Yellowknife River Cisco during fall, 1998-2020*, specifically by:• Summarizing commercial fishery quotas and reported harvest;• Characterizing population demographics and examining for trends over time;• Summarizing metrics of relative abundance (i.e., catch-per-unit-effort data and snorkel survey observations) and examining for trends over time; and• Determining if there were any associations between relative abundance of Cisco and river discharge and temperature. *A commercial harvest occurred in 1998, although no biological or catch-effort records were located. In addition, in response to concerns about the status of the population, the fishery was put on hold 2006–2009 to allow for a population assessment (no data during that time). DESCRIPTION:Cisco (Coregonus artedi) from the Yellowknife River, Northwest Territories, are an important fishery resource for nearby communities. Biological, catch-effort, and environmental data were collected from the Yellowknife River (Tartan Rapids and Bluefish areas) during their fall spawning run from Great Slave Lake. Data from the commercial harvest (fishery-dependent; 1998–2020) and supplementary monitoring (fishery-independent; 2013–2020) of these adfluvial Cisco were compiled to summarize commercial fishery quotas and reported harvest, characterize population demographics and catch-effort over time, and assess potential associations between relative abundance and seasonal river characteristics. A single commercial fishing licence for Cisco was issued on an annual basis each fall for 1,000 kg from 1998–2002, 2,000 kg from 2004–2005, 1,000 kg from 2010–2018, and 1,500 kg from 2019–2020. Cisco ranged from 102–239 mm fork length, 10.0–139.6 g round weight, and 1 and 9 years of age, with the majority of fish (>99%) being sexually mature. The demographics (length, weight, age) of the spawning population collected from the commercial fishery remained relatively stable between 1999 and 2020. Catch-effort of the commercial fishery varied widely among years without trend, although this was not standardized to the number of individuals/nets used to capture the fish. The biological, catch-effort, and environmental data collected from the Yellowknife River spawning population of Cisco serve as a benchmark for their ongoing assessment and management.
Mapping Inshore Lobster Landings and Fishing Effort on a Maritimes Region Statistical Grid (2015–2019)
This report describes an analysis of Maritimes Region inshore lobster logbook data reported at a grid level, including Bay of Fundy Disputed Zone data reported at the coordinate level. Annual and composite (2015–2019) grid maps were produced for landings, number of trap hauls, and the same series standardized by grid area, as well as maps of catch weight per number of trap hauls as an index of catch per unit effort (CPUE). Spatial differences in fishing pressure, landings, and CPUE are indicated, and potential mapping applications are outlined. Mapping the distribution and intensity of inshore lobster fishing activity has management applications for spatial planning and related decision support. The lack of region-wide latitude and longitude coordinates for inshore lobster effort and landings limits the utility of commercial logbook data for marine spatial planning purposes.
DFO Gridded Commercial Fishing Data - Various Years
These datasets show the general spatial distribution of commercial fishing harvest and landed values by fishery on a 1km x 1km planning grid. They aggregate key statistics around fleet specific fishing activity and catch in British Columbia (BC) within the exclusive economic zone (EEZ). These gridded data describe the annual average landed weight (Rounded KGs), and landed catch values (CAD $2016) of the subject fishery over the period. The data represented were created from logbook records and matched to prices from fish slips submitted to DFO by participants of BC’s commercial fishing fleets. The dataset is comprised of an aggregate of all species over 10, 9, or 5 years of fishing seasons, depending on the fishery. To preserve potentially proprietary information, a privacy filtering Rule of Five has been applied to each planning unit (each 1km x 1km planning unit). If any planning units do not meet this minimum of 5 unique vessels/unique identifiers during the time span then they are flagged as being filtered and an average of all filtered planning units is applied.The accompanying GeoDB contains two data layers, “all_fisheries_filtered_gridded “, which includes all of the commercial fisheries data in 1km x 1km grids, and “DFO_marine_bioregions_NSB_subregions”, which includes polygon feature boundaries for the federal marine bioregions and Northern Shelf bioregion sub-regions.This dataset contains data for the following fisheries:- Bottom trawl (2012-2016)- Midwater trawl (2012-2016)- Shrimp by trawl (2007-2016)- Prawn trap (2007-2016)- Rockfish (2012-2016)- Sablefish (2007-2016)- Halibut (2007-2016)- Combo trips - halibut/sablefish (2007-2016)- Lingcod (2007-2016)- Green sea urchin (2006-2015)- Red sea urchin (2007-2015)- Sea cucumber (2008-2016)- Geoduck (2007-2015)
Fisheries Dependent Data for Sea Scallop in the Southern Gulf of St. Lawrence
PURPOSE:This data relates to the Canadian Science Advice Secretariat (CSAS) Regional Science Advisory Process from the Limit Reference Point and Population Model Review of the Southern Gulf of Saint Lawrence Sea Scallop peer review meeting held on November 1-2, 2023. The SFAs 22 and 24 have been identified as the core scallop habitat within the sGSL for this process. Associated publications from this meeting will be posted on the Fisheries and Oceans Canada (DFO) Science Advisory Schedule as they become available. DESCRIPTION:Data on landings, fishing efforts, and catch per unit effort (CPUE) used in the stock assessment for southern Gulf of St. Lawrence (sGSL) sea scallop (_Placopecten magellanicus_) stock assessments and the limit reference point.The dataset contains corrected information from the following data sources:- DFO annual historic reports on landings and efforts- published documents about population assessments and surveys- logbooks, produced by DFO’s regional statistics- purchase slips, produced by DFO’s regional statistics- Catch per unit effort calculated by DFO's Science BranchPrior to 1947, data represents the combined landings that cannot be attributed to individual Scallop Fishing Areas (SFAs). USE LIMITATION:To ensure scientific integrity and appropriate use of the data, we would encourage you to contact the data custodian.
Herring Roe Fishery Catch Data
Pacific Herring roe catch data for British Columbia. There are five major stock assessment regions: Haida Gwaii, Prince Rupert District, Central Coast, Strait of Georgia, and West Coast of Vancouver Island; and two minor stock assessment regions: Area 2W and Area 27. Catch that occurred outside of the major and minor stock assessment regions is recorded as ‘other’. Herring roe catch data is maintained in the Herring stock assessment database. The sum of catch is in metric tonnes for a specified time frame, geographical location, and gear type. Due to privacy, catch where less than three parties fished in a given area and time frame cannot be released. In these cases, ‘WP’ will appear in this field.
Recovered Historic Catch and Weight – Length Data of Nearshore Fish Populations on Sturgeon and Roberts Banks, Fraser River Estuary, British Columbia
A goal of the Government of Canada’s Coastal Environmental Baseline Program (CEBP) is to amalgamate historic environmental data from high vessel traffic areas. An extensive DFO biological sampling program was conducted from 1980 to 1981 on Sturgeon and Roberts banks located on the outer Fraser River estuary, BC, Canada. This report collates and simplifies three data sets: water quality and nearshore fish catch previously published as DFO Data Report 340 (Conlin et al.1982), and un- published weight-length (W-L) data for two locations on Sturgeon Bank (Iona and Steveston) and near Westshore Terminals (Coal Port) on Roberts Bank. W-L data were reconstructed from archived computer printouts using Optical Character Recognition methods. Analyses of water quality data indicate that the two banks provided different fish habitats with Sturgeon Bank having a greater freshwater influence. Although Iona area water quality was exposed to sewage outfall from a nearby sewage treatment plant, it appears that fish communities were not different from the other Sturgeon Bank area (Steveston). The fish communities were found to be different between the two banks with Roberts Bank having greater overall abundance and diversity. Interestingly, of the seven fish species used for condition factor analyses, five were found to have lower Relative Condition Factors in the Roberts Bank sampling area.
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and topics that matter to you.
Please send us your feedback