The bedrock geologic units designate units of the same types of rock which composed the solid rock exposed at ground surface (as outcrop) or which underlies unconsolidated surficial sediments. This dataset represents a general description of the stratigraphy and geology, including geologic unit thickness, morphology, age and rank. It features a list of the geologic unit names and types of rock (lithology) in the hydrogeological unit, from a controlled vocabulary. While the preferred format to deliver this data is by using a shapefile and its linked attributes, this dataset can be delivered also by providing link to external data which should have at least the same properties or also by joining a georeferenced image of the map.

The extent of Sedimentary Rock as defined by Yukon Geological Survey, data is based on "GSC Open File 4673" .Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The lithogeochemical data provides the chemical composition of rock samples. This data helps characterize the rocks and can be used to understand their mode of formation.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This digital data release includes Rock Eval and total organic carbon results of selected samples for analyses of shale gas, oil and liquids. The strata evaluated include the: - basal Banff Formation, - Colorado Group, - Duvernay Formation, - Exshaw Formation, - Montney Formation, - Muskwa Formation, - Nordegg Member, and - Rierdon Formation.

This layer contains polygon features that represent geological units in New Brunswick. The associated Bedrock Geology Relate Table contains details about each map unit, including: a brief legend description, Group name, Formation name, and rock age. This layer is the result of nearly 50 years of bedrock mapping and it continues to change as new interpretations are made and more data is collected through field work and analysis.

A revised qualitative assessment of the hydrocarbon resource potential is presented for the Hudson Bay sedimentary basin that underlies Hudson Bay and adjacent onshore areas of Ontario, Manitoba, and Nunavut. The Hudson Basin is a large intracratonic sedimentary basin thatpreserves dominantly Ordovician to Devonian aged limestone and evaporite strata. Maximum preserved sediment thickness is about 2.5 km. Source rock is the petroleum system element that has the lowest chance of success; the potential source rock is thin, may be discontinuous, and the thin sedimentarycover may not have been sufficient to achieve the temperatures required to generate and expel oil from a source rock over much of the basin. The highest potential is in the center of the basin, where the hydrocarbon potential is considered amp;lt;'Mediumamp;gt;'. Hydrocarbon potential decreasestowards the edges of the basin due to fewer plays being present, and thinner strata reduce the chance of oil generation and expulsion. Quantitative hydrocarbon assessment considers seven plays. Input parameters for field size and field density (per unit area) are based on analog Michigan, Williston,and Illinois intracratonic sedimentary basins that are about the same age and that had similar depositional settings to Hudson Basin. Basin-wide play and local prospect chances of success were assigned based on local geological conditions in Hudson Bay. Each of the seven plays were analyzed in Roseand Associates PlayRA software, which performs a Monte Carlo simulation using the local chance of success matrix and field size and prospect numbers estimated from analog basins. Hudson sedimentary basin has a mean estimate of 67.3 million recoverable barrels of oil equivalent and a 10% chance ofhaving 202.2 or more million barrels of recoverable oil equivalent. The mean chance for the largest expected pool is about 15 million recoverable barrels of oil equivalent (MMBOE), and there is only a 10% chance of there being a field larger than 23.2 MMBOE recoverable. The small expected fieldsizes are based on the large analog data set from Michigan, Williston and Illinois basins, and are due to the geological conditions that create the traps. The small size of the largest expected field, the low chance of exploration success, and the small overall resource make it unlikely that there are any economically recoverable hydrocarbons in the Hudson Basin in the foreseeable future. The Southampton Island area of interest includes 93 087 km2 of nearshore waters around Southampton Island and Chesterfield Inlet in the Kivalliq Region of Nunavut. Of the total resource estimated for Hudson Bay, 14 million barrels are apportioned to the Southampton Island Area of Interest.

Hydrogeological Regions provide a framework to introduce the regional hydrogeology of Canada and to connect apparently disparate studies into a broader framework. The hydrological regions are first order areas used to capture and summarize data that will help develop more detailed profiles of each region. Comparison of findings within and between regions will allow scalable extension to sub-regional and watershed scale mapping.Canada has been classified into nine principal hydrogeological regions. Each region is described briefly based on the following five hydrogeological characteristics (Heath, 1984):system components and geometry;water-bearing openings;rock matrix composition;storage and transmission;recharge/ discharge.The hydrogeological classification emphasizes major geological provinces and rock formations. Fundamental water-bearing openings and rock matrix properties help determine the quantity (storage), flux (transmission), and composition of formation waters. These same properties and any overlying sediment cover affect recharge/ discharge rates for regional formations. While regional attributes are general, a simple aquifer mapping scheme can further describe the nature and character of aquifers in each region. For example, general groundwater settings across the country could be described as has been done by USGS principal aquifers [1]. Thus the regional framework can potentially link from national scales to watershed scales by identifying typical aquifer types based on readily available geological maps that use water-bearing character as a common attribute.The nine hydrogeological regions include:CordilleraMountains with thin sediment over fractured sedimentary, igneous and metamorphic rocks of Precambrian to Cenozoic age. Intermontane valleys are underlain by glacial and alluvial deposits of Pleistocene age.Plains (Western Sedimentary Basin)Region-wide basin of sub-horizontal Paleozoic to Cenozoic sedimentary rocks are overlain by thick glacial deposits filling buried valleys. Incised post-glacial valleys provide local relief. Shallow gas, coal, and brines may occur.Canadian ShieldUndulating region of thin glacial sediment overlying complex deformed, fractured PreCambrian igneous, metamorphic and sedimentary rocks. Region contains several terrains: sedimentary basins, structural belts, and glacial-lacustrine basins.Hudson Bay (Moose River) BasinSedimentary basin of Paleozoic to Mesozoic sub horizontal carbonate and clastic sediment covered by surficial deposits, with low relief and poor drainage.Southern OntarioEastern Great Lakes region is underlain by gently-dipping Paleozoic, carbonate, clastic and gypsum-salt strata overlain by glacial sediments up to 200 m thick with tunnel valleys. Karst, bedrock valleys, shallow gas and brines are also important components.St. Lawrence LowlandsLowlands underlain by shallow-dipping Paleozoic sedimentary rocks and thick glacial sediment in glacial-marine basins. Appalachian and Precambrian uplands discharge water to valleys. Shallow gas and saltwater intrusion are possible.AppalachiaUpland to mountainous region with thin surficial sediment on folded Paleozoic sedimentary and igneous rocks. Range of rock types yields a wide range of water compositions. Valleys contain important alluvial aquifers.Maritimes BasinLowlands with flat-lying, Carboniferous clastic , salt, and gypsum rocks contain shallow coal deposits. Surface glacial sediment is thin and discontinuous. Salt water intrusion is possible.PermafrostArctic islands and most areas north of 60o contain frozen ground affects on groundwater flow. Diverse topography and geology define sub-regions of sedimentary basins and crystalline rocks. Glacial sediment is thin, discontinuous; local peat accumulations are significant.

The Geological Atlas of the Western Canada Sedimentary Basin was designed primarily as a reference volume documenting the subsurface geology of the Western Canada Sedimentary Basin. This GIS dataset is one of a collection of shapefiles representing part of Chapter 18 of the Atlas, Jurassic and Lowermost Cretaceous Strata of the Western Canada Sedimentary Basin, Figure 21, Rock Creek/Lower Gravelbourg/Reston-Upper Watrous/Upper Amaranth Isopach and Lithofacies. Shapefiles were produced from archived digital files created by the Alberta Geological Survey in the mid-1990s, and edited in 2005-06 to correct, attribute and consolidate the data into single files by feature type and by figure.

The Geological Atlas of the Western Canada Sedimentary Basin was designed primarily as a reference volume documenting the subsurface geology of the Western Canada Sedimentary Basin. This GIS dataset is one of a collection of shapefiles representing part of Chapter 8 of the Atlas, Middle Cambrian to Lower Ordovician Strata of the Western Canada Sedimentary Basin, Figure 20d, Middle Cambrian Lithology Carbonates. Shapefiles were produced from archived digital files created by the Alberta Geological Survey in the mid-1990s, and edited in 2005-06 to correct, attribute and consolidate the data into single files by feature type and by figure.

The Geological Atlas of the Western Canada Sedimentary Basin was designed primarily as a reference volume documenting the subsurface geology of the Western Canada Sedimentary Basin. This GIS dataset is one of a collection of shapefiles representing part of Chapter 18 of the Atlas, Jurassic and Lowermost Cretaceous Strata of the Western Canada Sedimentary Basin, Figure 17, Jurassic Structure. Shapefiles were produced from archived digital files created by the Alberta Geological Survey in the mid-1990s, and edited in 2005-06 to correct, attribute and consolidate the data into single files by feature type and by figure.