A layer of points which delinate a change in shoreline type

A synthesis of available background data on the types and extent of anthropogenic disturbances on this shoreline as a well as to understand the types and amount of remaining natural shoreline features.

With the changing climate conditions, marine traffic along Canada’s coastal regions has increased over the past few decades and the need to improve our state of preparedness for oil-spill-related emergencies is critical. Baseline coastal information, such as shoreline form, substrate, and vegetation type, is required for prioritizing operations, coordinating onsite spill response activities (i.e., Shoreline Cleanup Assessment Technique [SCAT]), and providing information for wildlife and ecosystem management. Between 2011 and 2016, georeferenced high-definition videography and photos were collected for various study sites along the east coast. The study areas include Labrador, Bay of Fundy and Chedabucto Bay in Atlantic Canada.Data was collected during ice-free and low tide conditions (where applicable) between July and September. Low-altitude helicopter surveys were conducted at each study site to capture video of the shoreline characteristics. In addition to acquiring videography, ground-based observations were recorded in several locations for validation.Shoreline segmentation was then carried out by manual interpretation of the oblique videography and the photos aided by ancillary data. This involved splitting and classifying the shoreline vectors based on homogeneity of the upper intertidal zone. Detailed geomorphological information (i.e., shoreline type, substrate, slope, height, accessibility etc.) describing the upper intertidal, lower intertidal, supratidal and backshore zones was extracted from the video and entered into a geospatial database using a customized data collection form. In addition, biological characteristics like biobands, water features, fauna, human use etc. observed along the coast were recorded.The data was also validated through ground observations (when available) and a second interpreter QA (quality analysis) was performed on each dataset to ensure high quality and consistency. The final dataset contains segments ranging in length from 150 metres to 2500 metres. In total, from 2011 to 2016, within the 3 study sites, about 1,850 km of shoreline were mapped.

The characterization of shoreline strips was carried out on 400 km of agricultural watercourses for the territory of 5 MRCs in Montérégie (Beauharnois-Salaberry, Haut-Richelieu, Jardins-de-Napierville, Jardins-de-Napierville, Marguerite-d'Youville, Vallée-du-Richelieu). The results obtained by photo-interpretation, based on the width of the sections of shoreline strips calculated from the high-water line and the embankment, were aggregated to produce global results by municipality. The project was carried out as part of the Regional Program for the Acquisition of Data on Wetlands and Water Environments (PRADMHH) and was funded by the Regions and Rurality Fund (FRR) of the Montérégie regional department of the MAMH.Criteria used to characterize the conformity of shoreline strips.Shoreline compliance (Criteria used according to the width of the shoreline)Non-compliant (The non-compliant shoreline has a total width of less than 3 meters)Nearly compliant (The nearly-compliant shoreline has a total width of 3 meters or more, but less than 1 meter wide on the embankment)Compliant (The compliant shoreline has a total width of three meters or more and a width of a minimum of one meter on the embankment)Exceptional (The exceptional shoreline has a total width of 5 meters or more and a width of 3 meters or more from the embankment)**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Examples include: * shoreline access * enhanced shoreline access (with a dock or pier) * boat launches This data was created to be used as part of the Fish ON-Line mapping application.

With the changing climate conditions, marine traffic along Canada’s coastal regions has increased over the past couple of decades and the need to improve our state of preparedness for oil-spill-related emergencies is critical. Baseline coastal information, such as shoreline form, substrate, and vegetation type, is required for prioritizing operations, coordinating onsite spill response activities (i.e. Shoreline Cleanup Assessment Technique [SCAT]), and providing information for wildlife and ecosystem management. Between 2010 and 2016, georeferenced high-definition videography and photos were collected for various study sites along the north coast of Canada. The study areas include Beaufort Sea, Mackenzie Delta channels and Banks Island in the western Canadian Arctic and James Bay, Hudson Bay, Nunavik, Resolute Bay, Victoria Strait, Baffin Island and Coronation Gulf in the eastern Canadian Arctic.Data was collected during ice-free and low tide conditions (where applicable) between July and September. Low-altitude helicopter surveys were conducted at each study site to capture video of the shoreline characteristics. In addition to acquiring videography, ground-based observations were recorded in several locations for validation.Shoreline segmentation was then carried out by manual interpretation of the oblique videography and the photos aided by ancillary data. This involved splitting and classifying the shoreline vectors based on homogeneity of the upper intertidal zone. Detailed geomorphological information (i.e. shoreline type, substrate, slope, height, accessibility etc.) describing the upper intertidal, lower intertidal, supratidal and backshore zones was extracted from the video and entered into a geospatial database using a customized data collection form. In addition, biological characteristics like biobands, water features, fauna, human use etc. observed along the coast were recorded.The data was also validated through ground observations (when available) and a second interpreter QA (quality analysis) was performed on each dataset (excluding Nunavik) to ensure high quality and consistency. The final dataset contains segments ranging in length from 150 metres to 2500 metres. In total, from 2010 to 2016, within the 8 study sites, about 16,800 km of shoreline were segmented.

With the changing climate conditions, marine traffic along Canada’s coastal regions has increased over the past couple of decades and the need to improve our state of preparedness for oil-spill-related emergencies is critical. Baseline coastal information, such as shoreline form, substrate, and vegetation type, is required for prioritizing operations, coordinating onsite spill response activities (i.e. Shoreline Cleanup Assessment Technique [SCAT]), and providing information for wildlife and ecosystem management. Between 2013 and 2019, georeferenced high-definition videography and photos were collected for various study sites along the west coast. The study areas include the mainland, inlets, channels and islands along the BC coast starting from Kitimat in the north to Quadra Island in the south, including Haida Gwaii and North Vancouver Island in the west and Burrard Inlet in the extreme south.Data was collected during low tide conditions (where applicable) between July and September. Low-altitude helicopter surveys were conducted at each of the study site to capture video of the shoreline characteristics. In addition to acquiring videography, ground-based observations were recorded in several locations for validation.Shoreline segmentation was then carried out by manual interpretation of the oblique videography and the photos aided by ancillary data. This involved splitting and classifying the shoreline vectors based on homogeneity of the upper intertidal zone. Detailed geomorphological information (i.e. shoreline type, substrate, slope, height, accessibility etc.) describing the upper intertidal, lower intertidal, supratidal and backshore zones was extracted from the video and entered into a geospatial database using a customized data collection form. In addition, biological characteristics like biobands, water features, fauna, human use etc. observed along the coast were recorded.The data was also validated through ground samples (when available) and a second interpreter QA (quality analysis) was performed on the dataset to ensure high quality and consistency. The final dataset contains segments ranging in length from 150 metres (45 metres for study areas surveyed in 2018-19) to 2500 metres. In total, from 2013 to 2019, about 15,000 km of shoreline were segmented.

This dataset was created to: * better understand the state of the shoreline * track changes over time * identify priority areas for restoration The dataset provides important information for fish and wildlife habitat assessments. This includes identification of significant fish and wildlife areas and habitats like wetlands, woodlands, spawning habitat and biological productive areas. The dataset contains 2 spatial files: * a vector linear layer representing shoreline reaches * another vector polygon layer capturing shoreline and near-shore structures

The Riparian Quality Index (IQBR) is used to assess the ecological condition of the shoreline environment. It is built from nine components that have been weighted according to their potential to perform ecological functions in terms of the protection of aquatic ecosystems.Data on shoreline quality come from benthos monitoring stations sampled between 2003 and 2023.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The Canadian Hydrographic Service (CHS) High Water Mark Lines provide alongshore and across-shore geomorphological and biological attributes of the high water mark shoreline. The lines are used in the CHS nautical charts to represent the level reached by sea water at high tide.