All available bathymetry and related information for Lac Ste. Anne were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar Topography Mission 'SRTM' imagery and Indian Remote Sensing 'IRS' imagery) and corrected where necessary. The published data set contains the lake bathymetry formatted as an Arc ascii grid. Bathymetric contours and the boundary polygon are available as shapefiles.

All available bathymetry and related information for Lac Ste. Anne were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar Topography Mission 'SRTM' imagery and Indian Remote Sensing 'IRS' imagery) and corrected where necessary. The published data set contains the lake bathymetry formatted as an Arc ascii grid. Bathymetric contours and the boundary polygon are available as shapefiles.

All available bathymetry and related information for Lac Ste. Anne were collected and hard copy maps digitized where necessary. The data were validated against more recent data (Shuttle Radar Topography Mission 'SRTM' imagery and Indian Remote Sensing 'IRS' imagery) and corrected where necessary. The published data set contains the lake bathymetry formatted as an Arc ascii grid. Bathymetric contours and the boundary polygon are available as shapefiles.

The Natural Resources Conservation Board Service Area dataset is comprised of all the polygons that represent Natural Resources Conservation Board Service Areas in Alberta. The dataset is the administrative boundary for the 4 regional offices of Natural Resources Conservation Board.

A research survey on snow crab (Chionoecetes opilio) was conducted from May 2006 to May 2009 in the Bay of Ste. Marguerite near Sept-Îles, Quebec. The main objective of this survey was to assess the abundance of snow crab and benthic species associated with snow crab habitat. Only data for benthic species associated with snow crab habitat are presented in this dataset.Data were collected according to a fixed station sampling design consisting of 79 stations, between 7 to 198 meters depth. Specimens were collected using a beam trawl. The codend was lined with a small stretched mesh net in order to harvest the small individuals. The hauls were made at a target duration of 15 minutes. Start and end positions were recorded to calculate the distance traveled on each tow using the geosphere library in R. The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "Activity_Information" file includes generic activity information, including date and location. The "occurrence_taxon" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment, contact Bernard Sainte-Marie (Bernard.Sainte-Marie@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "ScientificnameID" field of the occurrence file. Data quality checks were performed using the R obistools and worrms libraries. All sampling locations were spatially validated.

The St. Anns Bank Marine Protected Area was established in June 2017. Data describing the spatial-temporal patterns and drivers of species movement is essential for evaluating species composition and to gauge the protective capacity of the MPA. Since 2015, an acoustic telemetry receiver array has been deployed and re-deployed annually in St. Anns Bank Marine Protected Area. Each receiver detects tagged fish that swim past and records hourly bottom temperature. Here we provide the bottom temperature data recorded on 46 receivers. Note that in 2021 the array design (mooring positions) changed. Please visit the Ocean Tracking Network data portal for more details (https://members.oceantrack.org/project?ccode=SABMPA).Cite this data as: Pettitt-Wade, H., Jeffery, N.W., Stanley, R.E. Data of: Bottom temperature data from St. Anns Bank MPA acoustic telemetry receivers deployed 2015 to 2022Published: January 2024. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S.https://open.canada.ca/data/en/dataset/910b8e22-2fd1-4ba1-8db6-d16763c7a625

Yukon Bedrock Geology MapThis update of the Yukon bedrock geology map builds upon the previous compilation by Gordey and Makepeace (1999, 2001). It includes new, detailed bedrock geology maps and regional compilations that have been published by the Yukon Geological Survey and the Geological Survey of Canada between 1999 and 2015, as well as some recent thesis works. A few of these maps were partially integrated into the digital dataset by Gordey and Makepeace (2003), but only as overlay to the 1999 compilation. A number of errors and omissions from the 1999 compilation of Gordey and Makepeace were also noted and corrected during compilation of this version of the map.The Yukon bedrock geology GIS dataset is regularly updated and can be downloaded from the Yukon Geological Survey ' s website: [https://yukon.ca/en/science-and-natural-resources/geology](https://yukon.ca/en/science-and-natural-resources/geology) . Users are advised to consult the website regularly to ensure they are working with the latest version of the geodatabase or shape files. This update of the GIS dataset includes an expanded attribute structure (compared to the 1999 dataset) that facilitates searching of the geodatabase.This dataset requires the gscGeology font in order to properly label the bedrock polygons. This font file is packaged with the dataset when downloaded from [https://yukon.ca/maps](https://yukon.ca/maps) or [https://yukon.ca/en/science-and-natural-resources/geology](https://yukon.ca/en/science-and-natural-resources/geology) .The Yukon Geological Survey aims to provide users with the best available geoscience data for Yukon. Any revisions or additional geological information known to the user would be welcomed by the Yukon Geological Survey.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Productive forest land base is defined as the total Crown forest area, determined by subtracting the following from the total area of the Cariboo Natural Resource Region: * All non-Crown land * All Crown land committed to non-timber use through a Land Act designation * All non-forest Crown Land, and * All forest area classified as brush or non-commercial cover in the Forest Inventory. See the CCLUP Land Use Order Implementation Direction for more information: https://www2.gov.bc.ca/assets/gov/farming-natural-resources-and-industry/natural-resource-use/land-water-use/crown-land/land-use-plans-and-objectives/cariboo-region/cariboochilcotin-rlup/cclup_land_use_order_implementation_direction_companion.pdf

These are derived products of ocean bottom temperature at St. Anns Bank Marine Protected Area (MPA), utilizing outputs from two numerical models: 1) Pseudo-analysis from the Coastal Ice-Ocean Prediction System for the East Coast of Canada (CIOPS-E v2.0.0) at 1/36° horizontal grid developed and implemented operationally at Environment and Climate Change Canada, covering 2016-2023 through combining research and operational runs from this system (https://eccc-msc.github.io/open-data/msc-data/nwp_ciops/readme_ciops_en/); 2) The Global Ocean Physics Reanalysis (GLORYS12v1), a 1/12° data assimilative reanalysis product produced by the Mercator Ocean International and implemented by the CMEMS, spanning from 1993 to 2023 ( https://doi.org/10.48670/moi-00021). The daily bottom temperature data presented here are calculated as daily area averages. The ocean bottom temperature data from the model available here are validated against in-situ observations from the open data (https://open.canada.ca/data/en/dataset/910b8e22-2fd1-4ba1-8db6-d16763c7a625). These products may be used to gain knowledge of ocean bottom temperature changes in the MPA over the past 8 and 30 years.Cite this data as: Casey, M., Hu, X, Tao, J., and Shen, H. Ocean Bottom Temperature Variations from CIOPS-E and GLORYS12 Models at St. Anns Bank. Published: August 2024. Ecosystems and Oceans Science, Maritimes region, Fisheries and Oceans Canada, Dartmouth NS. https://open.canada.ca/data/en/dataset/019f9138-6e3c-4f0e-997e-879e1ec2c42d

The purpose of this study was to characterize the kelp bed at Batture-aux-Alouettes, a preferred food source for the green sea urchin (Strongylocentrotus droebachiensis). The green urchin is fished commercially in Quebec and the fishing effort is concentrated on the Batture-aux-Alouettes near Tadoussac, at the mouth of the Saguenay Fjord. The study was conducted in two separate phases in 2018 and 2019. The main objective of this study was to determine the abundance and biomass of the kelp bed at Batture-aux-Alouettes. The first phase, using a stratified random sampling design, was conducted from August 21th to August 24th, 2018. Sampling of two 50 x 50 cm quadrats, separated by a distance of approximately 30 m, was conducted at eleven sites during twelve dives in the eastern section of the Batture-aux-Alouettes to collect kelp for biomass estimation and macroalgal species richness assessment. In the second phase, a total of 429 stations were first sampled between July 15 and 18, 2019 with a camera system dropped in two 50 x 50 cm quadrats. The presence or absence of kelp, percent macroalgal cover, and substrate type were assessed for each photo. As a result of this underwater photographic analysis, 129 of these stations were identified as having a presence of kelp and 88 of these stations had a presence of other algal species. To ensure equal representation of the different depth strata, the stations with kelp were divided into three depth categories: shallow (-1.7 m to 0 m), medium (0 m to 2 m) and deep (2 m to 5 m). Dives were conducted from August 13 to 15, 2019, at ten of these stations using a stratified random sampling design, taking care to ensure a balanced spatial distribution as well as an equal distribution of the different depth strata (four in the shallow, three in the medium, and two in the deep). Sampling of the 50 x 50 cm dive quadrat took place at three different distances spaced 5 m apart from a transect, i.e. at the 3 m (_3m), 8 m (_8m) and 13 m (_13m) mark. If there was little or no kelp in the quadrat, the quadrat sampling could be repeated for up to four quadrats per distance for a total area of 1 m². Two additional quadrats were conducted (_x) at two stations. Biomass assessment was also done via "cookie cutter" sampling (_CC). Divers took the same 50 x 50 cm quadrat and placed it on a selected (i.e., non-random) plot with 100% kelp cover.The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes generic information about the event, such as date and location. The "additional_information_event_and_occurrence" file includes sample size, protocol and sampling effort. The "taxon_occurrence" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment of the kelp bed at Batture-aux-Alouettes, contact Rénald Belley (renald.belley@dfo-mpo.gc.ca).For quality control, the organisms were identified in the field fallowing the guide: Chabot, Robert et Anne Rossignol. 2003. Algues et faune du littoral du Saint-Laurent maritime : Guide d'identification. Institut des Sciences de la mer de Rimouski, Rimouski; Pêches et Océans Canada (Institut Maurice-Lamontagne), Mont-Joli. 113 pages. The taxonomy was checked against the World Register of Marine Species (WoRMS) to match recognized standards and using the R obistools and worrms libraries. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. All sample locations were spatially validated. This project was funded by DFO Coastal Environmental Baseline Program under Canada’s Oceans Protection Plan. This initiative aims to acquire environmental baseline data contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems.