Phytoplankton pigments, determined by high-performance liquid chromatography (HPLC) are measured on DFO cruises three times a year in February, June, and August/September along Line P in the northeast subarctic Pacific. Sampling for phytoplankton pigments started in 2006 at the five main Line P stations and was expanded to sample at all twenty seven stations along the transect in June 2010.

Determines the location of Coal Titles within the Province of British Columbia. It is established under the authority of the Petroleum and Natural Gas Grid Regulation. It is defined by a set of UTM coordinates which approximate NAD 27 latitude and longitude positions. Units are the finest level of the Coal Grid. They are defined by UTM coordinates for their corners and the mid points of the four sides. A unit is the base building block for creating the Coal Grid. In a block there are 100 units, 10 rows by 10 columns, and numbered consecutively, starting in the southeast corner. The units are numbered 1 to 10, 11 - 20 etc. always reading from right to left. E.G. 082E05D007

Snow survey administrative basin areas, which are components of the BC snow survey network. Basin codes are used as basis of snow survey station names, and for some reporting purposes.

Productive forest land base is defined as the total Crown forest area, determined by subtracting the following from the total area of the Cariboo Natural Resource Region: * All non-Crown land * All Crown land committed to non-timber use through a Land Act designation * All non-forest Crown Land, and * All forest area classified as brush or non-commercial cover in the Forest Inventory. See the CCLUP Land Use Order Implementation Direction for more information: https://www2.gov.bc.ca/assets/gov/farming-natural-resources-and-industry/natural-resource-use/land-water-use/crown-land/land-use-plans-and-objectives/cariboo-region/cariboochilcotin-rlup/cclup_land_use_order_implementation_direction_companion.pdf

A tribal council is a grouping of First Nations with common interests who voluntarily joined together to provide services to member First Nations.The tribal council geographic location dataset contains the geographic location of all tribal councils in Canada as points as well as basic attributes data. Each tribal council point represents its address as it is registered in Indigenous and Northern Affairs Canada (INAC) Indian Government Support System (IGSS). A connection with the IGSS is in place to ensure that any update to the system is reflected in the attributes data associated with the geography of each tribal council. This dataset is Indigenous Services Canada (ISC) and Crown-Indigenous Relations and Northern Affairs Canada (CIRNAC) official source for Tribal Councils geographic location on maps.

A Crown land reservation is a tool under Section 18(c) of the Public Lands Act, to identify a management intent that will inform and provide direction to potential land users and regulatory bodies as authorized under the Public Lands Act. A reservation is not a disposition, does not grant any rights to public land or rights to access or occupy public land or rights to the resources on the land or under it. The Crown Land Reservations dataset displays reservations under application or active with their associated data attributes allowing users to view and access existing or proposed reservation information that could influence their application if a proposed activity intersects. More information can be found at www.alberta.ca/land-use-reservation-program.aspx

The Common Attribute Schema for Forest Resource Inventories (CASFRI) is a Canadian forest resource inventory data repository. Forest resource inventory datasets in CASFRI are harmonized to a common data model so that data collected by different agencies following different standards can be used together. Participating provincial, territorial and federal government departments and agencies share current and historical map-based forest resource inventory datasets through CASFRI so that their data are available to users who’s areas of interest span multiple jurisdictions. CASFRI was originally developed by academic researchers (Cumming et al., https://doi.org/10.1139/cjfr-2014-0102). This flavour of CASFRI (CASFRIv5) was developed anew in collaboration with academic researchers at the University of Laval to provide a government version of CASFRI that is findable, accessible, interoperable, and reusable. It uses the most up-to-date forest inventory data provided by participating provincial, territorial, and federal government departments and agencies. CASFRIv5 is hosted on the Canadian Council of Forest Ministers’ data portal, the National Forest Information System (http://nfis.org).

The raster maps depict a suite of forest attributes in 2001* and 2011 at 250 m by 250 m spatial resolution. The maps were produced using the k nearest neighbours method applied to MODIS imagery and trained from National Forest Inventory photo plot data. For detailed information about map production methods please refer to Beaudoin et al. (2018) "Tracking forest attributes across Canada between 2001 and 2011 using the k nearest neighbours mapping approach applied to MODIS imagery." Canadian Journal of Forest Research 48, 85-93. https://cfs.nrcan.gc.ca/publications?id=38979 The map datasets may be downloaded from https://nfi.nfis.org/downloads/nfi_knn2011.zip or https://open.canada.ca/data/en/dataset/ec9e2659-1c29-4ddb-87a2-6aced147a990 * Note: the forest composition (leading tree genus) map depicts forest attributes in 2001.How can this data be used?The resolution and accuracy of these map products are best suited for strategic-level forest reporting and informing policy and decision making at regional to national scales. As these maps also offer a coherent set of quantitative values for a large suite of forest attributes, they can be used as baseline information for modelling and in calculations such as merchantable forest volume or percentage of tree species. It is also possible to overlay these maps with other maps produced on the same pixel grid to make assessments of disturbance impacts, such as fire and harvests.

The raster maps depict a suite of forest attributes in 2001* and 2011 at 250 m by 250 m spatial resolution. The maps were produced using the k nearest neighbours method applied to MODIS imagery and trained from National Forest Inventory photo plot data. For detailed information about map production methods please refer to Beaudoin et al. (2018) "Tracking forest attributes across Canada between 2001 and 2011 using the k nearest neighbours mapping approach applied to MODIS imagery." Canadian Journal of Forest Research 48, 85-93. https://cfs.nrcan.gc.ca/publications?id=38979 The map datasets may be downloaded from https://nfi.nfis.org/downloads/nfi_knn2011.zip or https://open.canada.ca/data/en/dataset/ec9e2659-1c29-4ddb-87a2-6aced147a990 * Note: the forest composition (leading tree genus) map depicts forest attributes in 2001.How can this data be used?The resolution and accuracy of these map products are best suited for strategic-level forest reporting and informing policy and decision making at regional to national scales. As these maps also offer a coherent set of quantitative values for a large suite of forest attributes, they can be used as baseline information for modelling and in calculations such as merchantable forest volume or percentage of tree species. It is also possible to overlay these maps with other maps produced on the same pixel grid to make assessments of disturbance impacts, such as fire and harvests.

Terrain contours (TRNCNT) is a vector delineation of areas of equivalent elevation, in 5 m classes, as contour lines.Download: Here The Saskatchewan Ministry of Environment, Forest Service Branch, has developed a forest resource inventory (FRI) which meets a variety of strategic and operational planning information needs for the boreal plains. Such needs include information on the general land cover, terrain, and growing stock (height, diameter, basal area, timber volume and stem density) within the provincial forest and adjacent forest fringe. This inventory provides spatially explicit information as 10 m or 20 m raster grids and as vectors polygons for relatively homogeneous forest stands or naturally non-forested areas with a 0.5 ha minimum area and a 2.0 ha median area.  Terrain contours (TRNCNT) is a vector delineation of areas of equivalent elevation, in 5 m classes, as contour lines.  For more information, see the Forest Inventory Standard of the Saskatchewan Environmental Code, Forest Inventory Chapter.