This dataset contains the modelled and observed data used in the publication "Fjord circulation permits persistent subsurface water mass in a long, deep mid-latitude inlet" by Laura Bianucci et al., DFO Ocean Sciences Division, Pacific Region (published in the journal Ocean Science in 2024). An application of the Finite Volume Community Ocean Model (FVCOM v4.1) was run from May 24 to June 27, 2019 in the Discovery Islands region of British Columbia, Canada. Observed temperature and salinity profiles available in this area during this time period are included in the dataset, along with the modelled values at the same times and locations.

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater depth is measured on the field, using a water level meters. The depth is then subtracted from the elevation of the measurement site to obtain the water level elevation. The dataset is a general description of the measurement site including location and well elevation. It features a series of points of the surface elevation of the groundwater body.

In permafrost dominated regions, a gap persists in our understanding of water resources, the influence of groundwater, and the impact of climate change at the regional scale. Regional scale modelling can help to advance the understanding of these impacts by integrating with regional climate models. For regional modelling to be tenable, ongoing development of modelling methods and conceptualizations is required. By developing a fully integrated numerical groundwater-surface water climate model using HydroGeoSphere (HGS) (Aquanty 2021) for a gauged basin within the discontinuous permafrost zone, this dataset allows the verification of existing numerical methods and the testing of various conceptualizations of integrated groundwater-surface water flow in permafrost regions at the regional scale. This work informs future modelling and forecasting of regional water resources in permafrost regimes.

The North America Surface Water Values point dataset contains the current water level and stream flow values as recorded by Canadian and USA hydrometric gauging station locations. Daily values are recorded as well as comparisons with historical measurements, including difference in values from the previous day, the mean level for that calendar date, the annual mean water level, and maximum and minumum recorded levels. Percentile values based on historical average for both water level and stream flow are also included.Real-time gauging station data for Canada is available here: https://wateroffice.ec.gc.ca/search/statistics_e.htmlReal-time gauging station data for the United States is available here: https://waterservices.usgs.gov/rest/Statistics-Service.html

The Base Hydrography Point Event layer contains hydrographic point features representing the locations of water or water related features captured through the 1:20000 Provincial Base Mapping Project, the 1:50000 Resource Access Mapping Program, the Alberta Vegetation Inventory Program and the Federal Government National Topographic Data Base 1:50000 mapping.

Point features showing the location of groundwater wells in BC joined with attributes and information from the Groundwater Wells and Aquifers (GWELLS) application. NOTE: Artesian wells are flowing wells at the time of drilling. Suggested Filters: - Groundwater Supply Wells - Intended Water Use: WELL_CLASS = 'Water Supply' - Provincial Observation Wells: OBSERVATION_WELL_STATUS = 'Active' OR OBSERVATION_WELL_STATUS = 'Inactive'

Existing flood protection works (dikes and bank protection) crest alignment in British Columbia. Updated from available Provincial dike crest survey project data from 2019/2020. If 2019/2020 dike survey project data is unavailable, linework based on previous data from 2004 and prior. May include periodic updates depending on data provided by Diking Authorities and other sources. See Data Source under selected linework for details. For more information on dike management and safety, please see: https://www2.gov.bc.ca/gov/content/environment/air-land-water/water/drought-flooding-dikes-dams/integrated-flood-hazard-management/dike-management For contact names regarding regional diking issues, please see: https://www2.gov.bc.ca/assets/gov/environment/air-land-water/water/integrated-flood-hazard-mgmt/dike_safety_program_contact_list.pdf

Existing flood protection works appurtenances on or near dikes, for example, pump house, floodbox, culvert, gate, gauge, weir, etc. Updated from available Provincial dike survey project data from 2019/2020. If 2019/2020 dike survey project data is unavailable, appurtenance data based on previous data from 2004 and prior. May include periodic updates depending on data provided by Diking Authorities and other sources. See Data Source under selected appurtenance for details. For more information on dike management and safety, please see: https://www2.gov.bc.ca/gov/content/environment/air-land-water/water/drought-flooding-dikes-dams/integrated-flood-hazard-management/dike-management For contact names regarding regional diking issues, please see: https://www2.gov.bc.ca/assets/gov/environment/air-land-water/water/integrated-flood-hazard-mgmt/dike_safety_program_contact_list.pdf

A "contaminant attenuation zone" is a three-dimensional zone that is, * located on land adjacent to a landfilling site, * in the subservice or extends into the subsurface, and * is used or is intended to be used for the attenuation of contaminants from the landfilling site to levels that will not have an unacceptable impact beyond the boundary of the zone. This product requires the use of geographic information system (GIS) software.

In the hydrogeological unit, quantity of water that replenishes groundwater beneath the water table, expressed in mm/yr. Recharge is usually calculated using hydrology balance, integrating information from precipitation, hydrology data, drainage, soil properties, evapotranspiration, etc. The result is a raster dataset in which each cell has a given value for the recharge of the aquifer. It can be calculate using HELP software, developed by the US EPA. The methods used to create the dataset are described in the metadata associated with the dataset. The dataset represent a raster in which each cell has a mean value describing the global annual recharge of the hydrogeological unit.