__The link: *Access the data directory* is available in the section*Dataset Description Sheets; Additional Information*__.**Surface deposit** is the layer of loose material that covers rock. The deposit may have been established during the retreat of the glacier at the end of the last glaciation or by other processes associated with erosion and sedimentation. The nature of the loose deposit is evaluated based on the shape of the land, its position on the slope, the texture of the soil, or other indicators. Surface deposit maps make it possible to distinguish the main categories of surface deposits and to know their nature, thickness and distribution on Quebec territory. Based on the interpretation of aerial photographs at a scale of 1/40,000 and control points in the field as part of the ecoforest inventory of southern Quebec, this mapping contributes in particular to the development of ecological forest products.__ ⚠️ Notes: __+ This map covers almost the entire territory of Quebec south of the 52nd parallel. It is distributed by **map sheet at a scale of 1/50,000.** Surface deposits have a minimum area of 4 ha.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Deposit is the layer of loose material that covers rock. It may have been established during the retreat of the glacier at the end of the last glaciation or by other processes associated with erosion and sedimentation. The nature of the loose deposit is evaluated based on the shape of the land, its position on the slope, the texture of the soil, or other indicators. Surface deposit maps make it possible to distinguish the main categories of surface deposits, to know their nature, thickness and distribution on Quebec territory. The map of **surface deposits in the North** is a component of an extensive inventory carried out to meet knowledge acquisition needs as part of the economic, social and environmental development project “Plan Nord”. This inventory was carried out between 2010 and 2013. The mapping of surface deposits was carried out using a new approach based on remote sensing techniques. The interpretation was carried out by geomorphologists using RapidEye anaglyph (3D) satellite images with high spatial resolution (5 m). Ground and air control points allowed the validation of the interpreted information.Mapping is available throughout the country north of the 53rd parallel, which represents an area of approximately 680,000 km2. The minimum mapping area is 100 ha. **This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Surface Type describes the type of surface material used on road

The purpose of this dataset is to provide quantitative analysis on specific commodities, offering insights into:- The total amount of specific commodities, e.g., Gold, in Yukon's hard rock deposits. - The highest-grade and largest deposits in Yukon. - The distribution of mineral resources within multiple zones in a deposit. - Source reports, direct links, and confidence levels for each mineral resource statement. - Differentiation between 43-101, JORC, and historical estimates. The resources in this dataset have been summarized and averaged to show the total geologic resource for a property or zone. For the exact numbers, please refer to the NI 43-101 compliant resource statement.+-----------------------------------+-----------------------------------+| Field\ | Description\ || \ | \ |+-----------------------------------+-----------------------------------+| Property\ | Property for which deposit || \ | resource was calculated.\ || | \ |+-----------------------------------+-----------------------------------+| Zone\ | Zone for which deposit resource || \ | was calculated.\ || | \ |+-----------------------------------+-----------------------------------+| 43-101 Compliant\ | If the resource calculation is NI || \ | 43-101 compliant, JORC compliant, || | or historic.\ || | \ |+-----------------------------------+-----------------------------------+| Commodities\ | The types of commodities || \ | contained in the resource || | calculation, order is || | alphabetic.\ || | \ |+-----------------------------------+-----------------------------------+| Categories\ | The resource categories used to || \ | create the calculation. This || | indicates the level of certainty || | of the calculation.\ || | \ |+-----------------------------------+-----------------------------------+| Resource / Reserve\ | If the resource calculation is || \ | considered to be a reserve or || | resource. A reserve factors || | economic factors an || | extractability of the deposit || | into account.\ || | \ |+-----------------------------------+-----------------------------------+| Tonnage\ | The total tonnage of the deposit\ || \ | \ |+-----------------------------------+-----------------------------------+| AVG_AU_GT\ | The average grade of gold in the || \ | deposit, in grams per metric || | tonne.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_AU_OZ\ | The total contained gold, in troy || \ | ounces.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_AG_GT\ | The average grade of silver in || \ | the deposit, in grams per metric || | tonne.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_AG_OZ\ | The total contained silver, in || \ | troy ounces.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_CU_PCT\ | The average grade of copper in || \ | the deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_CU_LBS\ | The total contained gold, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_MO_PCT\ | The average grade of molybdenum || \ | in the deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_MO_LBS\ | The total contained molybdenum, || \ | in pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_PB_PCT\ | The average grade of lead in the || \ | deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_PB_LBS\ | The total contained lead, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_ZN_PCT\ | The average grade of zinc in the || \ | deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_ZN_LBS\ | The total contained zinc, in || \ | pounds\ || | \ |+-----------------------------------+-----------------------------------+| AVG_NI_PCT\ | The average grade of nickel in || \ | the deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_NI_LBS\ | The total contained nickel, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_CO_PCT\ | The average grade of cobalt in || \ | the deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_CO_LBS\ | The total contained cobalt, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_WO3_PCT\ | The average grade of tungsten || \ | trioxide in the deposit, in || | percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_WO3_LBS\ | The total contained tungsten || \ | trioxide, in pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_SN_PCT\ | The average grade of tin in the || \ | deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_SN_LBS\ | The total contained tin, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_SB_PCT\ | The average grade of antimony in || \ | the deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_SB_LBS\ | The total contained antimony, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_FE_PCT\ | The average grade of iron in the || \ | deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_FE_LBS\ | The total contained iron, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_PT_GT\ | The average grade of platinum in || \ | the deposit, in grams per metric || | tonne.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_PT_OZ\ | The total contained platinum, in || \ | troy ounces.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_PD_GT\ | The average grade of palladium in || \ | the deposit, in grams per metric || | tonne.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_PD_OZ\ | The total contained palladium, in || \ | troy ounces.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_BASO4_PCT\ | The average grade of barium || \ | sulphate in the deposit, in || | percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_BASO4_TONNES\ | The total contained barium || \ | sulphate, in pounds.\ || | \ |+-----------------------------------+-----------------------------------+| REFERENCE_DATE\ | The date of the resource || \ | calculation.\ || | \ |+-----------------------------------+-----------------------------------+| URL\ | The link to the report or graphic || \ | containing the resource || | calculation.\ || | \ |+-----------------------------------+-----------------------------------+| LATITUDE_DD\ | Y-Location, geographic center of || \ | zones.\ || | \ |+-----------------------------------+-----------------------------------+| LONGITUDE_DD\ | X-Location, geographic center of || \ | zones.\ || | \ |+-----------------------------------+-----------------------------------+Distributed from [GeoYukon](https://yukon.ca:443/geoyukon) by the [Government of Yukon](https://yukon.ca:443/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](http://geomatics.help@yukon.ca:80/)

The purpose of this dataset is to provide quantitative analysis on specific commodities, offering insights into:- The total amount of specific commodities, e.g., Gold, in Yukon's hard rock deposits. - The highest-grade and largest deposits in Yukon. - The distribution of mineral resources within multiple zones in a deposit. - Source reports, direct links, and confidence levels for each mineral resource statement. - Differentiation between 43-101, JORC, and historical estimates. The resources in this dataset have been summarized and averaged to show the total geologic resource for a property or zone. For the exact numbers, please refer to the NI 43-101 compliant resource statement.+-----------------------------------+-----------------------------------+| Field\ | Description\ || \ | \ |+-----------------------------------+-----------------------------------+| Property\ | Property for which deposit || \ | resource was calculated.\ || | \ |+-----------------------------------+-----------------------------------+| Zone\ | Zone for which deposit resource || \ | was calculated.\ || | \ |+-----------------------------------+-----------------------------------+| 43-101 Compliant\ | If the resource calculation is NI || \ | 43-101 compliant, JORC compliant, || | or historic.\ || | \ |+-----------------------------------+-----------------------------------+| Commodities\ | The types of commodities || \ | contained in the resource || | calculation, order is || | alphabetic.\ || | \ |+-----------------------------------+-----------------------------------+| Categories\ | The resource categories used to || \ | create the calculation. This || | indicates the level of certainty || | of the calculation.\ || | \ |+-----------------------------------+-----------------------------------+| Resource / Reserve\ | If the resource calculation is || \ | considered to be a reserve or || | resource. A reserve factors || | economic factors an || | extractability of the deposit || | into account.\ || | \ |+-----------------------------------+-----------------------------------+| Tonnage\ | The total tonnage of the deposit\ || \ | \ |+-----------------------------------+-----------------------------------+| AVG_AU_GT\ | The average grade of gold in the || \ | deposit, in grams per metric || | tonne.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_AU_OZ\ | The total contained gold, in troy || \ | ounces.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_AG_GT\ | The average grade of silver in || \ | the deposit, in grams per metric || | tonne.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_AG_OZ\ | The total contained silver, in || \ | troy ounces.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_CU_PCT\ | The average grade of copper in || \ | the deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_CU_LBS\ | The total contained gold, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_MO_PCT\ | The average grade of molybdenum || \ | in the deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_MO_LBS\ | The total contained molybdenum, || \ | in pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_PB_PCT\ | The average grade of lead in the || \ | deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_PB_LBS\ | The total contained lead, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_ZN_PCT\ | The average grade of zinc in the || \ | deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_ZN_LBS\ | The total contained zinc, in || \ | pounds\ || | \ |+-----------------------------------+-----------------------------------+| AVG_NI_PCT\ | The average grade of nickel in || \ | the deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_NI_LBS\ | The total contained nickel, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_CO_PCT\ | The average grade of cobalt in || \ | the deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_CO_LBS\ | The total contained cobalt, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_WO3_PCT\ | The average grade of tungsten || \ | trioxide in the deposit, in || | percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_WO3_LBS\ | The total contained tungsten || \ | trioxide, in pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_SN_PCT\ | The average grade of tin in the || \ | deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_SN_LBS\ | The total contained tin, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_SB_PCT\ | The average grade of antimony in || \ | the deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_SB_LBS\ | The total contained antimony, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_FE_PCT\ | The average grade of iron in the || \ | deposit, in percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_FE_LBS\ | The total contained iron, in || \ | pounds.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_PT_GT\ | The average grade of platinum in || \ | the deposit, in grams per metric || | tonne.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_PT_OZ\ | The total contained platinum, in || \ | troy ounces.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_PD_GT\ | The average grade of palladium in || \ | the deposit, in grams per metric || | tonne.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_PD_OZ\ | The total contained palladium, in || \ | troy ounces.\ || | \ |+-----------------------------------+-----------------------------------+| AVG_BASO4_PCT\ | The average grade of barium || \ | sulphate in the deposit, in || | percentage.\ || | \ |+-----------------------------------+-----------------------------------+| TOTAL_BASO4_TONNES\ | The total contained barium || \ | sulphate, in pounds.\ || | \ |+-----------------------------------+-----------------------------------+| REFERENCE_DATE\ | The date of the resource || \ | calculation.\ || | \ |+-----------------------------------+-----------------------------------+| URL\ | The link to the report or graphic || \ | containing the resource || | calculation.\ || | \ |+-----------------------------------+-----------------------------------+| LATITUDE_DD\ | Y-Location, geographic center of || \ | zones.\ || | \ |+-----------------------------------+-----------------------------------+| LONGITUDE_DD\ | X-Location, geographic center of || \ | zones.\ || | \ |+-----------------------------------+-----------------------------------+Distributed from [GeoYukon](https://yukon.ca:443/geoyukon)(target="_blank" style="text-decoration:underline;" rel="nofollow ugc noopener noreferrer") by the [Government of Yukon](https://yukon.ca:443/maps)(target="_blank" style="text-decoration:underline;" rel="nofollow ugc noopener noreferrer") . Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: [geomatics.help@yukon.ca](http://geomatics.help@yukon.ca:80/)(target="_blank" style="text-decoration:underline;" rel="nofollow ugc noopener noreferrer")

This thematic layer shows the location of pesticide stations in surface water monitored as part of various studies. The data comes from an extraction from the BQMA and, when a report is available on the Department's website, the reader can access it from a link in the information window. The dataset on the monitoring of pesticides in surface water also includes a layer of sampling stations, a layer of polygons presenting the drainage areas of some of the stations and finally, a data table including the compilation of land use by year for each of these drainage areas. The drainage areas and the land use table are linked to the sampling stations based on the BQMA station number.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

A Surveyed Sub-Surface Area Object that represents the spatial extent of a mineral claim to which sub-surface rights can be registered. In the Yukon, mineral claims can be classified as Quartz or Placer Claims, where as in other regions they are generically called mineral claimsDistributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Applications for the surface location of a well associated with oil and gas activity. This dataset contains point features for proposed applications collected through the BC Energy Regulator's Application Management System (AMS). This dataset is updated nightly

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater levels measured are interpolated / extrapolated to obtain groundwater level on every cell of the hydrogeological unit raster. Surfer and ArcGis are the software usually used to create groundwater level raster. The dataset designates a raster with a groundwater level, for each cell of the hydrogeological unit.

This is the spatial view used by Mineral Titles Online (MTO) on the mineral, placer and coal viewers. The spatial view combines the polygon information with attribute information for each title. Contains sub-surface title data in British Columbia for: - mineral claims, mining leases, mineral claim applications - placer claims, placer leases, placer claim applications - coal license applications, coal licenses, coal leases