Level curves with an equidistance of 1 m derived from a lidar survey conducted in 2024.attributes:ID - Unique IDSubtype - Master (1) or secondary (2) level curve SCORE - Elevation value (m) The High Resolution Digital Elevation Model (m) product The High Resolution Digital Elevation Model (HRDM) product is available on the Open Government website.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Snow survey administrative basin areas, which are components of the BC snow survey network. Basin codes are used as basis of snow survey station names, and for some reporting purposes.

Manual snow survey (active & inactive) locations as part of the BC Snow Survey program.

This the data for the Winnipeg AVPA Regulation's interactive web map. It contains two polygon datasets that help users determine whether a property is affected by requirements in the regulation and a point dataset to help users navigate to propertiesThis is the data for the Winnipeg Airport Vicinity Protection Area Regulation's interactive web map. It was developed to help interested parties determine whether a property is affected by the Airport Vicinity Protection Area Regulation. To protect and foster the airport’s operations and continued growth, while ensuring orderly and efficient development within Winnipeg, the Province has adopted an Airport Vicinity Protection Area Regulation under The City of Winnipeg Charter. The regulation defines two protection areas called "Area 1" and "Area 2".These areas provide direction on where and what type of residential development may take place near the airport. Area 1 comprises of lands immediately adjacent to the airport, where no new residential development will be permitted, except for replacement of buildings and minor infilling. Area 2 is located further away from the airport, where new or replacement residential development may be constructed. All development within the regulated lands must comply with indoor noise level limits set out in the Regulation.  The parcel boundaries in this interactive map are representations of parcels as defined by plan of subdivision or plan of survey registered at the Land Titles Office. This type of property boundary was chosen because the land division in these plans is used to define property ownership in Manitoba.

In 2015, a spawning ground acoustic survey that follows the design of the fishery-independent acoustic survey was initiated. This survey is the result of a partnership between DFO and fishery associations. The survey design uses random parallel transects within predefined strata. Surveys are conducted by fishermen in the fall fishing season according to protocols developed by DFO. The survey is conducted at night, during the weekend fishery closures except in Herring fishing area 16C and 16E in 2015 to 2017, where this region didn’t have weekend closures. The spawning ground acoustic survey is meant to provide a nightly estimate of spawning biomass among regions. It is analyzed in the same manner as the fishery-independent acoustic survey. The catches from the experimental nets are used to calibrate the spawning group specific target strength in order to obtain the nightly estimates of spawning biomass.

This map service provides access to the Geophysical Survey Index datasets shown on the GeoAtlas application.**Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule. This map service provides access to the Geophysical Survey Index datasets shown on the GeoAtlas application. It will contain data related to Lithoprobe Lines, NATGAM Spectrometer and Aeromagnetic Survey Indexes data.

This map service provides access to the Geophysical Survey Index datasets shown on the GeoAtlas application.**Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule. This map service provides access to the Geophysical Survey Index datasets shown on the GeoAtlas application. It will contain data related to Lithoprobe Lines, NATGAM Spectrometer and Aeromagnetic Survey Indexes data.

Fishing event (e.g., day, time, location, catch effort), and associated biological data from the Standardized Inlet Survey component of the annual Sablefish Research and Assessment Survey on the British Columbia coast.IntroductionDFO and the Canadian Sablefish Association undertake a collaborative fishery-independent annual research survey under a joint agreement. The survey employs longline trap gear to obtain catch rate data, gather biological samples, capture oceanographic measurements, and collect tag release and recapture data.Data summaries are provided here for standardized sets conducted at fixed stations within mainland inlets. The design of the sablefish survey has developed over time by incorporating and discontinuing components, including individual experimental studies (not available on OpenData). This Standardized Inlet Survey component differs in methodology from the other two survey components: (1) Offshore stratified random survey (2003 – present; available on OpenData using link below), and(2) Standardized trap survey – offshore indexing and offshore tagging (1990 – 2010; not yet available on OpenData). For the Standardized Inlet Survey, sets are allocated to five specific polygons in each of the following four inlet areas: Portland Inlet, Gil Island, Finlayson Channel, and Dean/Burke Channel. All four inlets were surveyed consistently between 2003 and 2019. No inlets were surveyed in 2020, and a single inlet was surveyed each year since 2021. Survey procedures are standardized and documented in Canadian Technical Reports of Fisheries and Aquatic sciences.Data tables provided for the Standardized Inlet Survey include (i) Effort, (ii) Catch, and (iii) Biological Information.Inlet EffortThis table contains information about annual survey trips and fishing events (sets). Trip-level information includes the year the survey took place, a unique trip identifier, the vessel that conducted the survey and the trip start and end dates (the dates the vessel was away from the dock conducting the survey). Set-level information includes the inlet name, date, time, location and depth that fishing took place, soak time, and number of traps deployed. All successful fishing events are included, where successful sets are those that met survey design specifications.Inlet CatchThis table contains the catch information from successful fishing events. Catch is identified to species or to the lowest taxonomic level possible. Catch is recorded as fish counts and / or weight. The unique trip identifier and set number are included so that catches can be related to the fishing event information (including capture location) for each set.Inlet Biological InformationThis table contains the biological data for sampled catches. Data may include any or all of length, weight, sex, maturity and age. Most of the sampled catch is Sablefish; however, some biological information has been collected for other species. Age structures are collected and are archived until required for analyses; therefore, all existing structures have not been aged. Tissue samples (usually a fin clip) may be collected for genetic (DNA) analysis for specific species. Tissue samples may be archived until required for analysis; for more information please see the data contacts. The unique trip identifier and set number are included so that samples can be related to the fishing event and catch information.

An Integrated Survey Area is an administrative area within which a British Columbia Land Surveyor is required to integrate cadastral surveys with a network of control monuments under the Integrated Survey Area. Tantalis is an information system designed specifically for the needs of the complex workings of Crown Land Registry and to provide automated support for all aspects of Crown land administration. It was designed to provide a foundation for integrating spatial data associated with mapping of survey plans and administrative boundaries with attribute data associated with legal documents and administrative records. The system records and tracks the sale, survey, license, access, return, and restriction of Crown land in British Columbia. This new system introduced the capacity for further applications, to revolutionize access and processing of Crown land information

Soil Survey Project Boundaries (soil mapping study areas) contains the soil survey project area and attributes describing each project (project level metadata), plus links to the locations of other data associated with the project (e.g., soil survey reports, polygon datasets, plotfiles, scanned maps, legends). Soil Mapping divides the landscape into units according to soil association, name, type, drainage, parent material, and texture. This layer is derived from the STE_TEI_PROJECT_BOUNDARIES_SP layer by filtering on the PROJECT_TYPE attribute. Project types include: SOIL, TIMSOI, and SOILSW. Current version: v11 (published on 2024-10-03) Previous versions: v10 (published on 2023-11-14), v9 (published on 2023-03-01), v8 (published on 2016-09-01) The Soil Survey dataset contains project boundaries as well as the soil survey polygons which are available in a variety of formats including: 1) via the [Soil Information Finder Tool](http://www2.gov.bc.ca/gov/content/environment/air-land-water/land/soil-information-finder) Mapping App (interactive app), 2) [Soil Survey Spatial data](https://catalogue.data.gov.bc.ca/dataset/soil-survey-spatial-view) with [Soil Name and Layer Files](https://catalogue.data.gov.bc.ca/dataset/soil-name-and-layer-files) (for download or viewing via iMapBC), or as 3) [Soil Mapping Data Packages](http://www.env.gov.bc.ca/esd/distdata/ecosystems/Soil_Data/Soil_Data_Pkgs/) with geodatabase or shape files, and a data dictionary.