Mean Temperature Difference From Normal values are computed by subtracting the normal monthly average temperature from the average monthly temperature of the month. The average monthly temperature is computed by obtaining the mean value of average daily temperatures for a month. If the month was colder than normal the value computed will be negative and if it was warmer the value will be positive.

Crop Heat Units (CHU) are calculated on a daily basis, using the maximum and minimum temperatures in order to account for a crop’s negative response to higher temperatures.The formula used to calculate the CHU value for a day is: (1.8 × (Minimum Temperature − 4.4) + 3.33 × (Maximum Temperature − 10) − 0.084 × (Maximum Temperature − 10)²) ÷ 2.0CHU values are only accumulated during the Growing Season, April 1 through October 31.

Maximum Temperature represents the highest recorded temperature value (°C) at each location for a given time period. Time periods include the previous 24 hours and the previous 7 days from the available date where a climate day starts at 0600UTC.

Minimum Temperature represents the lowest recorded temperature value (°C) at each location for a given time period. Time periods include the previous 24 hours and the previous 7 days from the available date where a climate day starts at 0600UTC.

Gridded monthly, seasonal and annual mean temperature anomalies derived from daily minimum, maximum and mean surface air temperatures (degrees Celsius) is available at a 50km resolution across Canada. The Canadian gridded data (CANGRD) are interpolated from homogenized temperature (i.e., AHCCD datasets). Homogenized temperatures incorporate adjustments to the original station data to account for discontinuities from non-climatic factors, such as instrument changes or station relocation. The anomalies are the difference between the temperature for a given year or season and a baseline value (defined as the average over 1961-1990 as the reference period). The yearly and seasonal temperature anomalies were computed for the years 1948 to 2017. The data will continue to be updated every year.

The minimum temperature layer shows the modeled minimum temperature [°C] at a height of 100 m above ground level, at each grid point, over the three year period from January 1, 2008 to December 31, 2010. Values are presented in bins with ranges of 1.5 °C each. Further details including data for individual years can be obtained by clicking on the dot representing the grid point location.

The maximum temperature layer shows the modeled maximum temperature [°C] at a height of 100 m above ground level, at each grid point, over the three year period from January 1, 2008 to December 31, 2010. Values are presented in bins with ranges of 1.5 °C each. Further details including data for individual years can be obtained by clicking on the dot representing the grid point location.

Monthly, seasonal and annual trends of daily minimum, mean and maximum surface air temperature change (degrees Celsius) based on homogenized station data (AHCCD) are available. Trends are calculated using the Theil-Sen method using the station’s full period of available data. The availability of temperature trends will vary by station; if more than 5 consecutive years are missing data or more than 10% of the data within the time series is missing, a trend was not calculated.

Seasonal and annual multi-model ensembles of projected change (also known as anomalies) in mean temperature (°C) based on an ensemble of twenty-nine Coupled Model Intercomparison Project Phase 5 (CMIP5) global climate models are available for 1901-2100. Projected change in mean temperature (°C) is with respect to the reference period of 1986-2005. The 5th, 25th, 50th, 75th and 95th percentiles of the ensembles of projected change in mean temperature change are available for the historical time period, 1901-2005, and for emission scenarios, RCP2.6, RCP4.5 and RCP8.5, for 2006-2100. Twenty-year average changes in mean temperature (°C) for four time periods (2021-2040; 2041-2060; 2061-2080; 2081-2100), with respect to the reference period of 1986-2005, for RCP2.6, RCP4.5 and RCP8.5 are also available in a range of formats. The median projected change across the ensemble of CMIP5 climate models is provided. Note: Projections among climate models can vary because of differences in their underlying representation of earth system processes. Thus, the use of a multi-model ensemble approach has been demonstrated in recent scientific literature to likely provide better projected climate change information.

Temperature data (typically in time series format) comes from investigations performed by government agencies, geotechnical engineers and consultants, academics, and others to obtain information on the air or ground thermal conditions of a site. Ground temperature investigations generally include the installation of temperature sensors at a variety of depth intervals, and data loggers which record the temperatures at regular time intervals ( e.g., hourly or daily) for varying time periods ranging from one-time or occasional measurements to multi-year monitoring. They also often involve the installation or monitoring of above-ground weather stations. Where ground temperature data characterizes the ground thermal regime, weather data allows for an understanding of the relationship between the ground thermal regime and local weather.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)