The Historic treaties (formerly known as the Pre-1975 treaties) dataset contains geographic boundaries as well as basic attribute data representing signed treaties that were negotiated between Indigenous peoples and the Crown between 1725 and 1929. However, the Treaties of Peace and Neutrality, signed between 1701 and 1760, are not represented in this dataset because they do not have geographic boundaries that can be represented on a map. Apart from the Peace and Friendship Treaties, these boundaries represent the historic treaties signed after 1763, which provided large areas of First Nations land, to the Crown (transferring their Aboriginal title to the Crown) in exchange for reserve lands and other benefits. The Government of Canada recognizes 70 historic treaties in Canada signed between 1701 and 1923. These treaties include:• Treaties of Peace and Neutrality (1701-1760)• Peace and Friendship Treaties (1725-1779)• Upper Canada Land Surrenders and the Williams Treaties (1764-1862/1923)• Robinson Treaties and Douglas Treaties (1850-1854)• The Numbered Treaties (1871-1921)These boundaries are usually not surveyed but help to delineate the broad area described within the treaty. The boundaries are composed of the sum of specific geographies such as lakes, rivers, townships, mountains, administrative boundaries or height of land as mentioned in the treaties transcript. These boundaries are estimated based on written descriptions and should be used for informational and representational purposes only. If there is no geographic description included in the treaty, illustrative polygons may be used to represent locations where the signatory nations, as modern-day collectives, assert and/or exercise Section 35 rights. For more information about Historic treaties, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100028574/1529354437231#chp3.The Historic treaties dataset is one of multiple datasets representing treaties and agreements between the Crown and Indigenous peoples. The Crown-Indigenous treaties and agreements geospatial datasets represent the geographic boundaries of the solemn agreements between the Crown and Indigenous peoples that set out promises, obligations and benefits for parties. The following datasets are also available: 1) The Modern treaties (formerly known as the Post-1975 treaties) dataset, which represents the areas of Canada where Indigenous land rights and title have not been addressed by preceding treaties or through other legal means.2) The Indigenous agreements dataset, which represents established protocols in place for consultation processes, self-government agreements, and other signed agreements between Indigenous groups and the Crown which do not fall into the aforementioned categories.The Historic treaties dataset is Crown-Indigenous Relations and Northern Affairs Canada (CIRNAC) and Indigenous Services Canada (ISC)’s primary source for Historic treaties geographic boundaries on maps.This dataset can also be viewed in the Aboriginal and Treaty Rights Information System (ATRIS). This web-based system provides access to information to inform governments, industry and other interested parties in determining their consultation obligations and in carrying out their consultation research. For more information, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100014686/1609421785838.

The Modern treaties (formerly known as the Post-1975 treaties) dataset contains geographic boundaries as well as basic attribute data representing signed agreements that were negotiated between Indigenous groups, the Government of Canada, and provincial and territorial governments after 1975. These boundaries represent the areas of Canada where Indigenous land rights and title have not been addressed by treaty or through other legal means. These boundaries represent the final result of a negotiated First Nation’s claimed area. These boundaries are usually not surveyed but help to delineate the geographic extent of the rights of Indigenous beneficiaries defined within the agreement. The Modern treaties dataset includes: 1) Overall Treaty Area (OTA) which is the broad area to which the agreement applies, often composed of the sum of the specific geographies defined within the treaty. 2) Treaty Settlement Lands that is wholly Indigenous-owned and forms part of the “land and cash” settlements that are integral to the treaty. This category belongs to the Department of Natural Resources Canada and can be found on the Open data website as ‘‘Aboriginal Lands’’ classified as ‘‘Land Claim’’. 3) Treaty-Specified Rights Areas which category pertains to areas (lands or waters) where specific rights, activities or responsibilities apply pursuant to the treaty. 4) Other Treaty-related Geography is the catch-all category for any remaining geographies that do not fit within the aforementioned categories but do form part of the OTA, such as lands or marine areas designated for conservation or for specific projects.For more information about Modern treaties, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100028574/1529354437231#chp4. The Modern treaties dataset is one of multiple datasets representing treaties and agreements between the Crown and Indigenous peoples. The Crown-Indigenous treaties and agreements geospatial datasets represent the geographic boundaries of the solemn agreements between the Crown and Indigenous peoples that set out promises, obligations and benefits for parties. The following datasets are also available: 1) The Historic treaties (formerly known as the Pre-1975 treaties) dataset, which represents most signed treaties that were negotiated between Indigenous peoples and the Crown between 1725 and 1929.2) The Indigenous agreements dataset, which represents established protocols in place for consultation processes, self-government agreements, and other signed agreements between Indigenous groups and the Crown which do not fall into the aforementioned categories.The Modern treaties dataset is Crown-Indigenous Relations and Northern Affairs Canada (CIRNAC) and Indigenous Services Canada (ISC)’s primary source for Modern treaties geographic boundaries on maps.This dataset can also be viewed in the Aboriginal and Treaty Rights Information System (ATRIS). This web-based system provides access to information to inform governments, industry and other interested parties in determining their consultation obligations and in carrying out their consultation research.For more information, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100014686/1609421785838.

The Indigenous agreements dataset contains geographic boundaries as well as basic attribute data representing arrangements between the Government of Canada, provinces and territories, and Indigenous organizations and communities. These arrangements address Indigenous and northern affairs, such as education, economic development, child and family services, health, and housing, that have not been addressed by treaties or through other means. However, this dataset only contains the Indigenous agreements that have a geographic boundary. The Indigenous agreements dataset includes: 1) Self-government agreements which represents the Indigenous groups that govern their internal affairs and assume greater responsibility and control over the decision making that affects their communities. Self-government agreements address the structure and accountability of Indigenous governments, their law-making powers, financial arrangements and their responsibilities for providing programs and services to their members. Self-government enables Indigenous governments to work in partnership with other governments and the private sector to promote economic development and improve social conditions. These boundaries usually represent the surveyed boundaries of the Indigenous group’s Indian reserve. 2) Consultation agreements (Consultation protocol) which represents an agreement signed between the Indigenous group and one or more parties that establish a consultation process. It sets out an orderly process through which the federal and/or provincial governments can consult with an Indigenous group regarding a contemplated project or activity that may have adverse impacts on established or asserted Aboriginal or Treaty rights. These agreements include Federal Bilateral agreement, Federal Tripartite agreement and other agreements. These boundaries are usually not surveyed but help to delineate the geographic extent of the agreement. 3) Other Agreements is the catch-all category for any remaining geographies of signed agreements between the Indigenous group and other parties, that do not fit within the aforementioned categories. These boundaries are usually not surveyed but help to delineate the geographic extent of the agreement.The Indigenous agreements dataset is one of multiple datasets representing treaties and agreements between the Crown and Indigenous peoples. The Crown-Indigenous treaties and agreements geospatial datasets represent the geographic boundaries of the solemn agreements between the Crown and Indigenous peoples that set out promises, obligations and benefits for parties. The following datasets are also available: 1) The Historic treaties (formerly known as Pre-1975 treaties) dataset, which represents most signed treaties that were negotiated between Indigenous peoples and the Crown between 1725 and 1929.2) The Modern treaties (formerly known as the Post-1975 treaties) dataset, which represents the areas of Canada where Indigenous land rights and title have not been addressed by preceding treaties or through other legal means.The Indigenous agreements dataset is Crown-Indigenous Relations and Northern Affairs Canada (CIRNAC) and Indigenous Services Canada (ISC)’s primary source for Indigenous agreements geographic boundaries on maps.This dataset can also be viewed in the Aboriginal and Treaty Rights Information System (ATRIS). This web-based system provides access to information to inform governments, industry and other interested parties in determining their consultation obligations and in carrying out their consultation research.For more information, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100014686/1609421785838.

This polygon dataset represents Community Interest Zones (CIZ) reserved on behalf of 21 Entitlement First Nations as per the Treaty Land Entitlement Framework Agreement and the Notice Area for the Peguis Treaty Entitlement Agreement.The Community Interest Zone (CIZ) dataset illustrates consultation areas reserved on behalf of 21 Entitlement First Nations represented by the Treaty Land Entitlement Committee as contained within the Treaty Land Entitlement Framework Agreement signed May 29th 1997, and the Peguis Treaty Entitlement Agreement signed April 29, 2008. The CIZ boundary is based on the 1:500,000 Province of Manitoba base map and a 30-km radius drawn from a specific existing reserve boundary. The boundary of the Peguis Notice Area was included in the Peguis Treaty Entitlement Agreement and has been digitized using a heads-up digitizing method. The areas have been squared off to include the whole section where only part of a section is intersected by the 30-km radius. For more information on individual agreements please visit the Manitoba government website: https://www.gov.mb.ca/inr/settlements-and-other-agreements/index.html Fields included [Alias (Field Name): Field description] OBJECTID (OBJECTID): Sequential unique whole numbers that are automatically generated ID Number (ID): A unique number identifying the Community Interest Zone First Nation (FIRST_NATION): Name of the First Nation for whom the Community Interest Zone area is reserved Community Interest Zone Name (NAME): Name of Community Interest Zone area

The Treaty Boundary dataset is comprised of all the polygons that represent the historical treaty lands of Canada negotiated by First Nations over the years through treaty-making between 1867 - 1999. The approximate boundaries illustrate the traditional territories described in First Nations Statements of Intent to negotiate treaties which have been submitted to, and accepted.

Province wide spatial view showing aquifers designated as a Water Reservation. These Reserves set aside water in an aquifer specifically for future treaty obligations, and are formally established through Orders in Council issued by the Lieutenant Governor in Council, as authorized under Sections 39–41 of the Water Sustainability Act.

This polygon dataset shows Crown land selections by First Nations as outlined by the Treaty Land Entitlement (TLE) Agreements in Manitoba, pursuant to the Crown Lands Act 5(1)(d).The purpose of this dataset is to show Crown land selection boundaries and information as outlined by the Treaty Land Entitlement (TLE) Agreements in Manitoba, pursuant to the Crown Lands Act 5(1)(d). This is a dynamic dataset — data can change daily.Site selections are generally identified and submitted on hard copy 1:50,000 National Topographic System (NTS) maps by the applicable First Nations. Selections are digitized using, where possible, 1:50,000 NTS map sheet base mapping, satellite or aerial imagery in the background. The method used is dependent on the location of the selection and the availability of digital base mapping in the area. A record may contain multiple polygons that have been combined to form one record.Best efforts have been taken to reasonably illustrate the parcels. All boundaries are to be considered approximate and for illustrative purposes only.For more information on Treaty Land Entitlement (TLE) Agreements, please visit the Manitoba government website: https://www.gov.mb.ca/inr/treaty-land-entitlement/index.htmlFields included [Alias (Field Name): Field description]OBJECTID (OBJECTID): Sequential unique whole numbers that are automatically generatedSite ID (SITE_ID): Site ID number of the selected siteArea in Square Metres (AREA): Area in square metresArea in Acres (ACREAGE): Area in acresBand Council Resolution Number (BCR_NO): Band Council Resolution numberName of the First Nation Making the Land Selection (BAND_NAME): Name of the First Nation making the land selectionSite Number (SITE_NO): Site number of the selected siteSelection Name (SELECTION): Name of the selected siteStatus Description (STATUS_DES): Land selection status description

The National Parks and National Park Reserves of Canada Legislative Boundaries web service includes the following lands: 1) National Parks of Canada as defined in Schedule 1 of the Canada National Parks Act, 2) National Park Reserves of Canada as defined in Schedule 2 of the Canada National Parks Act, 3) Rouge National Urban Park as defined in the Rouge National Urban Park Act and 4) Saguenay–St. Lawrence Marine Park as defined in the Saguenay-St. Lawrence Marine Park Act.The Data available for download is the former National Framework Canada Lands Administrative Boundaries Level 1 product. There are some attribute differences between the data available for download and the web service; however both contain the same underlying data. Please refer to the Supporting Documents for additional information on the National Framework Canada Lands Administrative Boundaries Level 1 dataset. Work is under way to align these two data products. As well, the Comprehensive Claims Settlement Areas have been removed from this dataset, but can be obtained from the Post-1975 Treaties (Modern Treaties) dataset produced by Indigenous and Northern Affairs Canada.

This polygon dataset shows First Nation land acquisitions designated as Other Land as outlined by the Treaty Land Entitlement (TLE) Agreements in Manitoba, pursuant to the Crown Lands Act 5(1)(d).The purpose of this dataset is to show geographic boundaries for land acquisitions designated as Other Land, as outlined by the Treaty Land Entitlement (TLE) Agreements in Manitoba, pursuant to the Crown Lands Act 5(1)(d). This is a dynamic dataset - data can change daily.Other Land includes land that has been purchased by the First Nations from private landowners or Surplus Provincial or Surplus Federal land that has been purchased from the Manitoba or Canada governments. The title to the land is privately held by a First Nation corporation until it gets transferred to the Government of Canada, however the mines and minerals and other residual interests may be owned by the Crown (Government of Manitoba) and they are required to be transferred to the Government of Canada (subject to third party interest resolution, if applicable).The sites are generally identified by title with reference to a plan of survey, metes and bounds description. Locations are mapped using existing cadastral or parcel mapping data, or reasonably illustrate the site within the dataset. A record may contain multiple polygons that have been combined to form one record.All boundaries are to be considered approximate and for illustrative purposes only.For more information on Treaty Land Entitlement (TLE) Agreements please visit the Manitoba government website: https://www.gov.mb.ca/inr/treaty-land-entitlement/index.htmlFields included [Alias (Field Name): Field description]OBJECTID (OBJECTID): Sequential unique whole numbers that are automatically generatedSite ID (SITE_ID): Site ID number of the selected siteArea in Square Metres (AREA): Area in square metresArea in Acres (ACREAGE): Area in acresBand Council Resolution Number (BCR_NO): Band Council Resolution numberName of the First Nation Making the Land Selection (BAND_NAME): Name of the First Nation making the land selectionSite Number (SITE_NO): Site number of the selected siteSelection Name (SELECTION): Name of the selected site

####Leading Group for the Cariboo Region (pinegroup or firgroup). #### 1. IDF - Fir Group: includes all forest polygons in NDT 4 (IDF and BG biogeoclimatic zones) that meet any of the following criteria: *a) Douglas-fir ( Fd or Fdi) leading or ponderosa pine leading; *b) Lodgepole pine leading, and Douglas-fir ( Fd or Fdi) or ponderosa pine greater than 15% in any inventory layer; *c) Trembling aspen leading, and Douglas-fir ( Fd or Fdi) or Ponderosa pine greater than 15% in any inventory layer, and spruce, red-cedar, cottonwood and birch less than 6% in any inventory layer; *d) No species information in inventory data (usually NSR stands), and inventory type group for pre-harvest stand or the current stand = 1, 2, 3, 4, 5, 6, 7, 8, 29, or 32 These inventory type groups correspond to the following species compositions F, FC, FCy, FH, FS, FPl, Fpy, FL, FDEcid, PlF and Py. If inventory type group=0 and pre-harvest inventory type is not available, classify the polygon as Pine Group. 2. IDF-Pl Group: includes all forest polygons in NDT 4 (IDF and BG biogeoclimatic zones) that do not meet the above definition for IDF-Fir Group.