Nuclear licensees operate across Canada. This includes uranium mines and mills, uranium processing facilities, nuclear power plants, research reactors, particle accelerators, and nuclear substances processing facilities. All of these facilities are licensed by the CNSC and are subject to strict regulatory oversight to ensure the safety of the public and the environment.

This dataset contains the total annual releases of radionuclides released directly to the environment through stack emissions from uranium and nuclear substance processing facilities in Canada.This original radionuclide releases dataset of the uranium and nuclear substance processing facilities provides results for both stack emissions and direct discharge (i.e. releases to water). The dataset has been divided in two subsets for better discoverability. In this record as its title indicates, you will find the stack emissions results mapped. Make sure to look at the uranium and nuclear substance processing facilities direct discharge record in order to obtain a complete picture.

This dataset contains the total annual releases of radionuclides released directly to the environment through direct discharge from uranium and nuclear substance processing facilities in Canada.This original radionuclide releases dataset of the uranium and nuclear substance processing facilities provides results for both stack emissions and direct discharge (i.e. releases to water). The dataset has been divided in two subsets for better discoverability. In this record as its title indicates, you will find the direct discharge results mapped. Make sure to look at the uranium and nuclear substance processing facilities stack emissions record in order to obtain a complete picture.

The HealthLink BC Mental Health and Substance Use (MHSU) data set includes the following: Programs that offer early intervention, transitional care or other services that supplement and facilitate primary and adjunctive therapies; which offer community mental health education programs; or which link people who are in need of treatment with appropriate providers. Programs that provide preventive, diagnostic and treatment services in a variety of community and hospital-based settings to help people achieve, maintain and enhance a state of emotional well-being, personal empowerment and the skills to cope with everyday demands without excessive stress or reliance on alcohol or other drugs. Treatment may include emotional support, introspection and problem-solving assistance using a variety of modalities and approaches, and medication, as needed, for individuals who have a substance use disorder involving alcohol and/or other drugs or for people who range from experiencing difficult life transitions or problems in coping with daily living to those with severe, chronic mental illnesses that seriously impact their lives. Multidisciplinary programs, often offered on an inpatient basis with post-discharge outpatient therapy, that provide comprehensive diagnostic and treatment services for individuals who have anorexia nervosa, binge-eating disorder, bulimia or a related eating disorder. Treatment depends on the specific type of eating disorder involved but typically involves psychotherapy, nutrition education, family counseling, medication and hospitalization, if required, to stabilize the patient's health. Alliance of Information & Referral Systems (AIRS) / 211 LA County taxonomy is the data classification used for all HealthLink BC directory data, including this MHSU data set (https://www.airs.org/i4a/pages/index.cfm?pageid=1). AIRS taxonomy and data definitions are protected by Copyright by Information and Referral Federal of Los Angeles County, Inc (https://211taxonomy.org/subscriptions/#agreement)

This product provides the median of monthly maximum turbidity values (in nephelometric turbidity units) for drinking water facilities by drainage region. Turbidity refers to the relative cloudiness of water, caused by suspended particles in water. The Survey of Drinking Water Plants collected this monthly maximum turbidity data for surface water sources from facilities reporting turbidity data for at least 10 months in 2013. These facilities served 24 million people and produced 4,091 million cubic metres of potable water from surface water sources in 2013. Source water turbidity was monitored continuously at 42% of these drinking water plants in 2013, daily at 34% of plants and less frequently at the remaining plants.

An opening's disturbance and silviculture activities reported into RESULTS. Most activities are within opening boundaries with the exception of broadcast treatments. An opening may have more than one activities associated with it. Activities may also overlap each other. Reporting of disturbance and silviculture attribute information is a mandatory requirement while the map is optional. This is part of the Silviculture and Land status Tracking dataset, which includes tracking harvesting and silviculture obligations on Crown Land

The Wastewater Systems Effluent Regulations (WSER), developed under the Fisheries Act, came into force in 2012 to manage wastewater releases by systems that collect an average daily influent volume of 100 cubic metres or more. The WSER also does not apply to any wastewater system located in the Northwest Territories, Nunavut and north of the 54th parallel in the provinces of Quebec and Newfoundland and Labrador. The WSER set national baseline effluent quality standards that are achievable through secondary wastewater treatment. The map below presents the wastewater system locations in Canada and the type of treatment they utilize (mechanical, lagoon or no treatment). The data is based on the information submitted to Environment and Climate Change Canada as of November 2022. Note that this layer does not represent the level of wastewater treatment or whether the system complies with the WSER.The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting wastewater systems, datasets are available in either Excel or CSV formats at the resource listed below: “Wastewater Systems Effluent Regulations Reported Data”.Data from Quebec and YukonThe data for Quebec municipalities (after 2017) is provided to the department separately through the equivalency agreement that was finalized in October 2018. Beginning in 2015, the data reported for the Yukon is provided to the department separately through an equivalency agreement finalized in 2014.More information on the wastewater sector including the regulations, agreements, contacts and resource documents is available at: https://www.canada.ca/wastewater

This model is derived from geological and geophysical data, which is processed using deep learning and natural language processing techniques. Displayed is a Pan-Canadian probability map indicating the likelihood of discovering next-generation lithium-cesium-tantalum (LCT) pegmatites. This map was generated using known Canadian LCT pegmatites and their associated geospatial features, incorporating geological and geophysical data analyzed through deep learning and natural language processing techniques. Higher probability values highlight areas with an increased likelihood of hosting next-generation deposits, making this map a valuable tool for decision-making.

Locations for the collection, treatment and disposal of solid wastes generated by the Saskatchewan populations using effective waste management practices. .Locations for the collection, treatment and disposal of solid waste generated by the Saskatchewan populations using effective waste management practices.The Provincial inventory of regulated and monitored Solid Waste sites (landfills, industrial landfills, transfer stations, industrial landfarms and compost sites). Includes information on current Status – closed/open, Permit Information, Inspection Date, Site Name, and Site Type.

This polygonal dataset represents authorized applications for a Mines Act permit known as a Permitted Mine Area (PMA). This dataset can be used in combination with the NoW point dataset which represents both applications for a Mines Act permit and issued authorizations for mining activities proposed in the application. **The regional mine PMA dataset is not complete for all mine sites in BC. Review the data quality section for more information** Point representation of NoW: https://catalogue.data.gov.bc.ca/dataset/fab53209-63be-4c61-8de4-3e3fceec4227 Applications for regional Mines Act permits are known as Notice of Work (NoW) applications. Regional mine permits are issued for mineral and coal exploration activities, sand and gravel production, quarry production, and placer mining. Major mine permits are issued for producing mineral and coal mines. Permits are issued by the chief permitting officer under section 10 of the Mines Act and administered by the ministry. **Regional mines include:** * Exploration — mineral, coal, rock quarry, industrial mineral or dimension stone * Sand and gravel — aggregate, rock or natural substances used for construction purposes * Placer   Most exploration and development activities require a permit under the Mines Act. A decision marks the end of the permitting process for a NoW application. The decision can either be to reject the application or to authorize the mining activities proposed in the NoW. * For new NoW authorizations, a Mines Act permit is issued * For an existing open Mines Act permit, the newly authorized mining activities are amended to the existing permit and the permit is re-issued   Notice of Work categories include: Notice of Work application type, Notice of Work application status. **Notice of Work application type** Field: NOW_APPLICATION_TYPE_DESC (NW_APPTYPD) * Coal * Mineral * Placer Operations * Quarry – Construction Aggregate * Quarry – Industrial Mineral * Sand and Gravel   **Notice of Work application status** Field: NOW_APPLICATION_STATUS_DESC (NW_APPSTAD) * Approved – mining activities in the NoW application have been authorized   **For the public view, please be aware that the ministry:** * Removed the attribute value of closed permits in the PERMIT_STATUS_CODE_DESC (PMT_STD) field. These records will show as permit status is NULL (empty). * Only shows mine commodities of gold or jade/nephrite in the MINE_COMMODITY_DESC (MN_COMD) field. All other commodity values remain NULL (empty)