Polygon features representing the geographical extent of a source area that contributes water to a drinking water system. A drinking water system is any domestic system servicing anything other than a single-family dwelling, as defined in the Drinking Water Protection Act. Source Area is a broad term used to describe any area that could potentially contribute water to the drinking water system; it does not mean that hydrologic analyses have been completed to determine likelihood of connectivity. These source areas most often represent the entire aquifer extent (for ground water systems) or the watershed upstream from the intake (for surface water systems). This is one of three Drinking Water Sources datasets (along with the DWS - Intakes/Wellheads points dataset, and DWS - Protection Zones polygons dataset). Note: these polygons have unique Source Areas IDs used to relate them to the Intakes/Wellhead points.

This product provides the median of monthly maximum turbidity values (in nephelometric turbidity units) for drinking water facilities by drainage region. Turbidity refers to the relative cloudiness of water, caused by suspended particles in water. The Survey of Drinking Water Plants collected this monthly maximum turbidity data for surface water sources from facilities reporting turbidity data for at least 10 months in 2013. These facilities served 24 million people and produced 4,091 million cubic metres of potable water from surface water sources in 2013. Source water turbidity was monitored continuously at 42% of these drinking water plants in 2013, daily at 34% of plants and less frequently at the remaining plants.

Point features showing the location of intakes and/or wellheads for drinking water systems. A drinking water system is any domestic system servicing anything other than a single-family dwelling, as defined in the Drinking Water Protection Act. These locations are updated as more information is received and is therefore continually being updated and may or may not match the corresponding Point of Diversion locations available through the Water Rights dataset and application. This is one of three Drinking Water Sources datasets (along with the DWS - Source Areas polygons dataset, and DWS - Protection Zones polygons dataset). Note: the polygons all have unique polygon IDs used to relate them to these points.

Polygon features showing various zones of protection around drinking water system intakes/wellheads. A drinking water system is any domestic system servicing anything other than a single-family dwelling, as defined in the Drinking Water Protection Act. Zone of protection is a broad term that represents a wide variety of areas as they have been delineated in their corresponding report. The methods and processes used to delineate these zones vary based on several factors including, but not limited to, population, vulnerability, hydrologic/hydrogeologic parameters, etc. For the use of this dataset, the term Protection Zone means that protection measures should be considered and/or implemented in these areas due to the importance of these areas supplying drinking water to their water system users. Protection Zone does not mean that protection measures have been implemented in these areas, nor that protection measures are not required beyond the boundary of these areas. This is one of three Drinking Water Sources datasets (along with the DWS - Intakes/Wellheads points dataset, and DWS - Source Areas polygons dataset). Note: these polygons have unique Protection Zone IDs used to relate them to the Intakes/Wellhead points.

This product provides the ratio of surface freshwater intake to water yield for August 2013, with the exception of drainage regions 7, 8, 16, 17 and 18, which use the ratio of August intake to the long-term minimum monthly water yield. Surface freshwater intake aggregates data from the Survey of Drinking Water Plants, 2013 and the Industrial Water Use Survey, 2013 with estimates of agricultural water use for 2013 based on the Agricultural Water Use Survey and the Alberta Irrigation Information report. Data for water use by the oil and gas industry and households not supplied by a public water provider are also excluded.

Province-wide SDE spatial layer displaying consumptive water licence points of diversion for drinking water systems. In the context of this layer, Drinking Water Systems means two or more water licences for domestic purposes at a single POD; and/or a water licence(s) for any other purpose indicating a water diversion and distribution system supplying water directly to residences and/or buildings for human consumption. This layer is an instantiation of the spatial view WLS_BC_POD_DRINKING_SOURCES_SVW

This dataset provides the results obtained by Health Canada’s Radiological Monitoring Network (CRMN) for the tritium activity concentration in drinking water originating from the water treatment plants in Ottawa, ON. More information about the CRMN network can be found on the Health Canada website (see link below). The results provided are the tritium activity concentration in units of becquerels per litre (Bq/L). Although ensuring water quality is a matter of provincial jurisdiction, the CRMN, in collaboration with the city of Ottawa, has been conducting a targeted program to monitor the radiological content of drinking water from two water treatment plants in Ottawa, ON.The Guidelines for Canadian Drinking Water Quality recommend a Maximum Acceptable Concentration (MAC) for tritium in drinking water of 7000 Bq/L. The measured activity concentrations of tritium in drinking water are well below this guideline value.The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

This dataset provides the results obtained by Health Canada’s Canadian Radiological Monitoring Network (CRMN) for the gross alpha and beta activity concentrations in drinking water, given in units of becquerels per liter (Bq/L). More information about the CRMN network can be found on the Health Canada website (see link below). Although water quality is a matter of provincial jurisdiction, the CRMN, in collaboration with the city of Ottawa, has been conducting a targeted program to monitor the radiological content of drinking water from two water treatment plants in Ottawa, ON. The Guidelines for Canadian Drinking Water Quality recommend screening levels of 0.5 Bq/L and 1.0 Bq/L for gross alpha and gross beta activity, respectively. The screening levels are set to reflect the most restrictive Maximum Acceptable Concentrations (MACs) for specific radionuclides in drinking water. If the screening levels are not exceeded, compliance with the guidelines can be inferred. The screening levels set out in the Guidelines for Canadian Drinking Water Quality are calculated based on annual averages of radionuclides in drinking water. Short-term exposure to levels above those recommended by these guidelines does not indicate a health risk. The measured gross alpha and gross beta activity concentrations presented here are well below the screening levels set by the Guidelines for Canadian Drinking Water Quality, with only one exception to date. This occurred February 28, 2011, and was attributable to the flushing of lead pipes at the water treatment plant. It resulted in a spike of naturally occurring lead radionuclides that was dealt with immediately by the City of Ottawa. The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

In rural Alberta, 90 per cent of people use private well water supplies for domestic use (e.g., drinking, cooking, bathing). Domestic well water systems are not regulated by the provincial or federal governments. The Government of Alberta along with Alberta Health Services (AHS) provides water chemistry testing of private well water and information and advice on safe water for domestic purposes; however, it is the responsibility of well owners to ensure the quality and safety of their water supply. Water quality may be impacted by contamination from natural sources or human activities and cause noticeable aesthetic issues or potential health concerns. Water samples are collected and submitted by well owners through local AHS sites for analysis of routine chemistry and trace element parameters. Routine chemistry testing focuses on the suitability of the water for drinking and household use with two health-related parameters. For trace elements, testing used to be conducted only when there were health concerns or when the water was suspected to contain chemicals of concern (2001 to Sep 2018). Currently, trace element testing is completed for all samples submitted for routine analysis (if the sample volume is sufficient). The Alberta Centre for Toxicology has conducted the analyses of raw domestic well water samples since March 2004. From 2001 to Mar 2004, testing was conducted by Enviro-Test Laboratories. Limited information is available regarding the analytical methods and detection limits for this lab; therefore, users are advised to exercise caution when using the 2001 to Mar 2004 data. These datasets contain the routine chemistry results for raw well water samples collected from 2001 to 2018. Corrections may be made to the dataset over time (e.g., removal of samples deemed to be treated); users should regularly check for updates and download the most current versions. For additional information, refer to the publications on the “Related” tab of this webpage.

Delimitation of protective areas for surface drinking water withdrawals forThe territory of the City of Rouyn-Noranda**This third party metadata element was translated using an automated translation tool (Amazon Translate).**