This dataset provides the results obtained by Health Canada’s Radiological Monitoring Network (CRMN) for the tritium activity concentration in drinking water originating from the water treatment plants in Ottawa, ON. More information about the CRMN network can be found on the Health Canada website (see link below). The results provided are the tritium activity concentration in units of becquerels per litre (Bq/L). Although ensuring water quality is a matter of provincial jurisdiction, the CRMN, in collaboration with the city of Ottawa, has been conducting a targeted program to monitor the radiological content of drinking water from two water treatment plants in Ottawa, ON.The Guidelines for Canadian Drinking Water Quality recommend a Maximum Acceptable Concentration (MAC) for tritium in drinking water of 7000 Bq/L. The measured activity concentrations of tritium in drinking water are well below this guideline value.The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

This dataset provides the results obtained by Health Canada’s Radiological Monitoring Network (CRMN) for tritium content in atmospheric water vapor sampled from monitoring stations in Ontario, Quebec and New Brunswick. More information about the CRMN network can be found on the Health Canada website (see link below). The results provided are for tritium activity concentration, expressed in units of becquerels per cubic meter (Bq/m3). Atmospheric water is sampled monthly for determination of tritium content. The majority of such monitoring activity occurs in close proximity to nuclear power plants. Until 1996, Health Canada monitored the areas near Darlington, Bruce and Pickering in Ontario, Gentilly in Quebec, and Point Lepreau in New Brunswick. In 1996, Health Canada’s monitoring of the Ontario stations was terminated to avoid redundancy, since a similar initiative was underway through the Ontario Ministry of Labour. Currently, the CRMN monitors six sites in the vicinity of Point Lepreau, four sites in the vicinity of Gentilly, and a single site in the Greater Toronto Area. The average tritium concentration for the CRMN stations is 0.22 Bq/m3 for the time period from 2004 to 2013. This is consistent with results reported for other monitoring stations in close proximity to Canadian nuclear power stations, and the levels are considered to be safe from a health perspective. Note that the tritium values are measured using liquid scintillator measurements. This requires removing the background contribution from the measurement. The uncertainty associated with each measurement, can lead to reported values of less than zero. The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

This dataset contains the total annual releases of radionuclides released directly to the environment through stack emissions from uranium and nuclear substance processing facilities in Canada.This original radionuclide releases dataset of the uranium and nuclear substance processing facilities provides results for both stack emissions and direct discharge (i.e. releases to water). The dataset has been divided in two subsets for better discoverability. In this record as its title indicates, you will find the stack emissions results mapped. Make sure to look at the uranium and nuclear substance processing facilities direct discharge record in order to obtain a complete picture.

This dataset contains the total annual releases of radionuclides released directly to the environment through direct discharge (i.e. releases to water) from uranium mines and mills in Canada.Note that there is no stack emissions for the uranium mines and mills.

Nuclear licensees operate across Canada. This includes uranium mines and mills, uranium processing facilities, nuclear power plants, research reactors, particle accelerators, and nuclear substances processing facilities. All of these facilities are licensed by the CNSC and are subject to strict regulatory oversight to ensure the safety of the public and the environment.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track facility-based releases to water of 4 substances that are defined as toxic under the Canadian Environmental Protection Act, 1999: mercury, lead, cadmium and arsenic and their compounds. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, as well as by source. The indicators inform Canadians about releases to water of these 4 substances from facilities in Canada. The Releases of harmful substances to water indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 4 substances and water pollution in general.Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

This map service provides access to most of the Resource Map datasets shown on the GeoAtlas application.**Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule. This map service is used by the GeoATLAS web application, sub-section Resource Map in the Mineral Exploration theme. It includes Base Metals Potential, Coal Potential, Gold Potential, Helium Potential, Bitumen (Oil Sands) Potential, Lithium Potential, Potash and Salt Resource Potential, Rare Earth Elements Potential and Uranium Potential schema in Production Data Warehouse. Note: Oil and Gas pools are found in the /Petroleum service.

The bedrock geologic units designate units of the same types of rock which composed the solid rock exposed at ground surface (as outcrop) or which underlies unconsolidated surficial sediments. This dataset represents a general description of the stratigraphy and geology, including geologic unit thickness, morphology, age and rank. It features a list of the geologic unit names and types of rock (lithology) in the hydrogeological unit, from a controlled vocabulary. While the preferred format to deliver this data is by using a shapefile and its linked attributes, this dataset can be delivered also by providing link to external data which should have at least the same properties or also by joining a georeferenced image of the map.

This dataset represents the radioisoptopic tracers for selected rocks in the province of Saskatchewan, Canada.This dataset represents the compilation of radioisoptopic tracers for selected rocks in the province of Saskatchewan, Canada.  **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track facility-based releases to water of 3 substances that are defined as toxic under the Canadian Environmental Protection Act, 1999: mercury, lead and cadmium and their compounds. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, as well as by source. The indicators inform Canadians about releases to water of these 3 substances from facilities in Canada. The Releases of harmful substances to water indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 3 substances and water pollution in general. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators