Sub-surface facilities used for storing natural gas. The facilities are usually hollowed-out salt domes, geological reservoirs (depleted oil or gas field) or water bearing sands (called aquifers) topped by an impermeable cap rock.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.

This dataset represents the digital compilation of the Mineral Assessment Underground surveys of the Province of Saskatchewan.This dataset represents the digital compilation of the Mineral Assessment Underground surveys of the Province of Saskatchewan.  This data shows Mineral Assessment Work Catalogue: Outlines of areas and descriptions of work submitted for mineral assessment credits (Underground surveys). This is an ongoing assemblage of mineral assessment airborne surveys. The data was created as a file geodatabase feature class and output for public distribution. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule. 

The locations of wells that have been drilled for oil production, gas or salt resources or for underground storage of hydrocarbons. This data can be used for land use and resource management, emergency management, as well as compliance and enforcement in the petroleum industry. The Data is collected on an on-going basis and maintained in the Ontario Petroleum Data System (OPDS).

A borehole is a general term for any narrow shaft drilled in the ground, either vertically or horizontally. A borehole may be constructed for many different purposes, including: * extraction of water or fluid (e.g., oil) or gases (e.g., natural gas or methane) * for a geotechnical investigation * for an environmental site assessment * for mineral exploration * as a pilot hole for installing piers or underground utilities This data contains a continuous log of strata for each borehole as well as for geocolumns. A geocolumn is a collection of information from an examination of exposed substrate, such as in a quarry wall or along a roadway passage.

This thematic layer shows the location of water sampling sites authorized in Quebec under section 22 of the Environment Quality Act (chapter Q-2) and their associated volume (liter per day). Water sampling sites are the sites where water enters a facility designed to take water, both underground and surface. The database includes active authorizations to take water since the Water Withdrawal and Protection Regulation (RPEP) came into force on August 14, 2014.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

A hydrogeological unit is defined as any soil or rock unit or zone that by virtue of its hydraulic properties has a distinct influence on the storage or movement of groundwater. It is considered the main dataset from the GGP point of view. Hydrogeological units are ranked into five levels (from largest to smallest): 1) hydrogeological region, 2) hydrogeological context, 3) aquifer system, 4) hydrostratigraphic unit, and 5) aquifer. Here are formal definitions for these different types of hydrogeologic units. - Hydrogeological region Hydrogeological regions are areas in which the properties of sub-surface water, or groundwater, are broadly similar in geology, climate and topography. There are 9 such regions identified in Canada (ref?). - Hydrogeological context Hydrogeological contexts are units of reporting, conceptually narrower than regions, and are additionally delineated by physiographic and hydrogeological aspects. - Aquifer system ""A heterogeneous body of intercalated permeable and poorly permeable material that functions regionally as a water-yielding hydraulic unit; it comprises two or more permeable beds [aquifers] separated at least locally by aquitards [confining units] that impede groundwater movement but do not greatly affect the regional hydraulic continuity of the system"" (Poland et al., 1972). - Hydrostratigraphic unit (HSU) ""Body of sediment and/or rock characterized by ground water flow that can be demonstrated to be distinct under both unstressed (natural) and stressed (pumping) conditions, and is distinguishable from flow in other HSUs"" (Noyes et al.) - Aquifer ""A formation, group of formations, or part of a formation that contains sufficient saturated permeable material to yield significant quantities of water to wells and springs"" (Lohman et al, 1972, p. 21). The rank attribute is used to specify the scope of the described unit. The general principle behind this specification is to allow the same data structure to apply to various types of hydrogeological units, from the local aquifer to the almost continental hydrogeological region. The dataset includes properties such as identification, physiography, geology, aquifer description and properties, water balance, groundwater use and risk. It features numerical values or a general description when no values are available. The description can also be used to add context to the numerical values. For each property, metadata identifying the source of the original data, links to similar data in GIN, and description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data. This dataset is designed to capture and represent a set of synthesized information pertaining to hydrogeological units through maps and succinct table reports. Some attributes (or properties) of the dataset are irrelevant depending of the rank of the unit. In general, this dataset is organised to include multiple properties associated with aquifers and larger hydrogeologic units. These properties are grouped into categories, which include identification, physiography, geology, aquifer description, water balance, groundwater use and risk. The numerical values associated with each of the properties can be used to create thematic maps; hence, the importance of using standardized units of measurement and definitions for these properties. When numerical values are not available, a general description may be supplied instead. The description can also be used to add context to the numerical values. Because this dataset is the cornerstone of the national view on groundwater, supplemental contextual information (metadata) must be part of the data. Thus, for each property, metadata identifying the source of the original data, links to similar data in GIN, and a description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data.

The bedrock geologic units designate units of the same types of rock which composed the solid rock exposed at ground surface (as outcrop) or which underlies unconsolidated surficial sediments. This dataset represents a general description of the stratigraphy and geology, including geologic unit thickness, morphology, age and rank. It features a list of the geologic unit names and types of rock (lithology) in the hydrogeological unit, from a controlled vocabulary. While the preferred format to deliver this data is by using a shapefile and its linked attributes, this dataset can be delivered also by providing link to external data which should have at least the same properties or also by joining a georeferenced image of the map.

Groundwater flow is the movement of water in an aquifer or hydrogeological unit. The dataset shows groundwater flow rate and direction in the hydrogeological unit. Groundwater flow is establish from piezometric surface map. The method used to create the dataset is described in the metadata associated with the dataset. The dataset represents a description of the flow, including rate in m/d, direction, date and source. Typically, the data provided will not be in the form of a shapefile with linked properties but in the form of an image that sketches the groundwater flow. The image could also represent a cross section of the hydrogeologic units showing the regional trends of the groundwater flow.

Surficial geologic units are unconsolidated materials overlying bedrock. The dataset represents a general description of the stratigraphy and geology, including geologic unit thickness, morphology, age and rank. It features a list of the geologic unit names and types of sediment in the hydrogeological unit. While the preferred format to deliver this data is by using a shapefile and its linked attributes, this dataset can be delivered also by providing link to external data which should have at least the same properties or also by joining a georeferenced image of the map.

Determines the location of Coal Titles within the Province of British Columbia. It is established under the authority of the Petroleum and Natural Gas Grid Regulation. It is defined by a set of UTM coordinates which approximate NAD 27 latitude and longitude positions. Units are the finest level of the Coal Grid. They are defined by UTM coordinates for their corners and the mid points of the four sides. A unit is the base building block for creating the Coal Grid. In a block there are 100 units, 10 rows by 10 columns, and numbered consecutively, starting in the southeast corner. The units are numbered 1 to 10, 11 - 20 etc. always reading from right to left. E.G. 082E05D007