The spatial representation for a Public Sustained Yield Unit, which is an area of Crown land, usually a natural topographic unit determined by drainage areas, managed for sustained yield by the Crown through the Ministry of Forests. It includes all Crown lands within the currently established boundaries of the unit and excludes federal lands, provincial parks, experimental forest reserves, gazetted watersheds and tree farm licences. Crown land designated as a public sustained yield unit under Section 6 of the Forest Act. A portion of a TSA

An administrative unit of forest land designated by the Minister, as authorized under Section 14(1) of the Forests Act.

The daily mean is the average of all unit values for a given day.

This is the Grid Unit portion of the Oil and Gas Land Division System. This is a grid system consisting of three sections, Area, Section and Unit used to describe Yukon Oil and Gas Dispositions, Leases and Licences. Every Grid Section shall be divided into Units.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Wildlife Management Unit (WMU) dataset is comprised of all the polygons that represent the Wildlife Management Units in Alberta. WMU is an area of wildlife managed under Wildlife Act, Alberta Regulation 143/79.

A Range Unit is an administrative area established to assist in the management of the range program. Typically made up of one or more pastures. Generally, one or more Range Units make up a Stock Range

Hydraulic properties characterize a hydrogeological unit. The hydraulic properties considered for this dataset are the transmissivity, the hydraulic conductivity, the storage coefficient, the specific storage coefficient and the porosity. Hydraulic properties are estimated by performing aquifer tests (pumping tests, slug tests). The hydraulic tests and their duration are managed in this dataset. The methods used to create the dataset are described in the metadata associated with the dataset. The dataset exhibits a general description of hydraulic properties of the hydrogeological unit, including hydraulic test, total test duration, method and date. It includes numbers and/or ranges describing the aquifer tests results. Note that an alternate raster representation could be used in complement to the discrete point-based representation.

A hydrogeological unit is defined as any soil or rock unit or zone that by virtue of its hydraulic properties has a distinct influence on the storage or movement of groundwater. It is considered the main dataset from the GGP point of view. Hydrogeological units are ranked into five levels (from largest to smallest): 1) hydrogeological region, 2) hydrogeological context, 3) aquifer system, 4) hydrostratigraphic unit, and 5) aquifer. Here are formal definitions for these different types of hydrogeologic units. - Hydrogeological region Hydrogeological regions are areas in which the properties of sub-surface water, or groundwater, are broadly similar in geology, climate and topography. There are 9 such regions identified in Canada (ref?). - Hydrogeological context Hydrogeological contexts are units of reporting, conceptually narrower than regions, and are additionally delineated by physiographic and hydrogeological aspects. - Aquifer system ""A heterogeneous body of intercalated permeable and poorly permeable material that functions regionally as a water-yielding hydraulic unit; it comprises two or more permeable beds [aquifers] separated at least locally by aquitards [confining units] that impede groundwater movement but do not greatly affect the regional hydraulic continuity of the system"" (Poland et al., 1972). - Hydrostratigraphic unit (HSU) ""Body of sediment and/or rock characterized by ground water flow that can be demonstrated to be distinct under both unstressed (natural) and stressed (pumping) conditions, and is distinguishable from flow in other HSUs"" (Noyes et al.) - Aquifer ""A formation, group of formations, or part of a formation that contains sufficient saturated permeable material to yield significant quantities of water to wells and springs"" (Lohman et al, 1972, p. 21). The rank attribute is used to specify the scope of the described unit. The general principle behind this specification is to allow the same data structure to apply to various types of hydrogeological units, from the local aquifer to the almost continental hydrogeological region. The dataset includes properties such as identification, physiography, geology, aquifer description and properties, water balance, groundwater use and risk. It features numerical values or a general description when no values are available. The description can also be used to add context to the numerical values. For each property, metadata identifying the source of the original data, links to similar data in GIN, and description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data. This dataset is designed to capture and represent a set of synthesized information pertaining to hydrogeological units through maps and succinct table reports. Some attributes (or properties) of the dataset are irrelevant depending of the rank of the unit. In general, this dataset is organised to include multiple properties associated with aquifers and larger hydrogeologic units. These properties are grouped into categories, which include identification, physiography, geology, aquifer description, water balance, groundwater use and risk. The numerical values associated with each of the properties can be used to create thematic maps; hence, the importance of using standardized units of measurement and definitions for these properties. When numerical values are not available, a general description may be supplied instead. The description can also be used to add context to the numerical values. Because this dataset is the cornerstone of the national view on groundwater, supplemental contextual information (metadata) must be part of the data. Thus, for each property, metadata identifying the source of the original data, links to similar data in GIN, and a description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data.

This feature class represents Manitoba's Forest Management Unit (FMU) boundaries.Forest Management Units (FMU's) define a forested area with common forest conditions that are managed in a similar manner. Forest Sections are comprised of FMU's. Forest inventories within Forest Management Units are analysed to determine allowable harvest limits of softwood and hardwood tree species within each Forest Management Unit. Version 3: The southern portion of FMU 67 within the Highrock Forest Section has been adjusted to align with base features captured in 2009. Additionally, an 11 hectare portion of the Saskatchewan River Forest Section (FMU 59) has been added to the Highrock Forest Section. Version 4: The northern portion of FMU 68 along the Rail Haul within the Highrock Forest Section has been adjust so that the boundary falls within water only. Additionally, version 4 splits the 'White Zone' forest section (FMU 76) by ecozones, creating FMU 76 (Taiga Shield), FMU 77 (Southern Arctic), FMU 78 (Hudson Plain) and FMU 79 (Boreal Shield). Version 4 is dated February 8, 2013. Fields Included: OBJECTID: Sequential unique whole numbers that are automatically generated . MANAGEMENT_UNIT_NUMBER : Management Unit (MU) number . S ECTION : Forest section number . SECTION_NAME : Forest section name .

Point layer of the registration points (centroids) of the evaluation units of the graphic matrix.**Collection context** Update provided by the evaluator or evaluation department.**Collection method** Computer-aided mapping.**Attributes*** `ID` (`integer`): Identifier* `ADM01A` (`varchar`): Municipality code* `SI0317A` (`smalldatetime`): Registration date* `SI0317B` (`integer`): Representation scale* `SI0317C` (`varchar`): Registration* `SI0317D` (`varchar`): Location* `SI0102C` (`varchar`): Section* `SI0103C` (`varchar`): Division* `UNIT_V` (`varchar`): Neighborhood unit* `NOTES` (`varchar`): Notes* `DATE_CREATION` (`smalldatetime`): Creation date* `DATE_MODIFICATION` (`smalldatetime`): Date of modification* `USER_MODIFICATION` (`varchar`): Modified byFor more information, consult the metadata on the Isogeo catalog (OpenCatalog link).**This third party metadata element was translated using an automated translation tool (Amazon Translate).**