These data were created under DFO’s Strategic Program for Ecosystem-based Research and Advice - Aquatic Invasive Species Program: “Evaluation of the movement of marine infrastructure as a pathway for aquatic invasive species spread”. This geodatabase contains floating dock locations in coastal waters of the Pacific Northwest, from Puget Sound, Washington to Southeast Alaska. These data were assembled by Josephine Iacarella and used in an analysis to understand the role of floating infrastructure as a vector in the spread of marine nonindigenous species (Iacarella et al., 2019). The data are represented as point vectors, though docks have associated size estimates. Data were collected with the aim to have the most accurate representation of coastal coverage of structures in 2017. The most recent images from Google Earth were used, though in some areas these date back a few years.Floating docks included those that extended into the subtidal and were not fixed on pilings. Dock locations were binned into size categories, with small docks and associated marina structures grouped together as ‘marina areas’ based on spatial clustering and a visual estimate of size (haphazard measurement selection, n=35 per category; small: 57.2 m2 ± 6.7, medium: 379.1 m2 ± 42.8, marina area: 4,453.5 m2 ± 744.4). A total of 7,809 floating dock sites were recorded, covering an estimated area of 2.3 km2.

Considered the "king" of sea lions, the Steller sea lion (Eumetopias jubatus) is the biggest of all sea lions and enjoys a lifespan of up to thirty years. In Canada, the Steller can be spotted along the rocky coast of British Columbia. This hefty mammal usually travels alone or in a small group, but wisely, it joins others for protection during the mating and birthing season. Little is known about its oceanic lifestyle; however, the good news for this sea-loving mammal is that since the Steller sea lion first became protected in 1970, the size of the adult population has more than doubled. Recent trends in the abundance of Steller sea lions (Eumetopias jubatus) in British Columbia were assessed based on a series of thirteen province-wide aerial surveys conducted during the breeding season (27-June to 06-July) between 1971 and 2013.

Land Features entities are: Island, Shoreline, Wooded Area, Saturated soil, Landform Feature (esker, sand\...), and Cut Line. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Effective conservation planning relies on understanding population connectivity which can be informed by genomic data. This is particularly important for sessile species like the horse mussel (Modiolus modiolus), a key habitat-forming species and conservation priority in Atlantic Canada), yet little genomic information is available to describe horse mussel connectivity patterns. We used more than 8000 restriction-site associated DNA sequencing-derived single nucleotide polymorphisms and a panel of 8 microsatellites to examine genomic connectivity among horse mussel populations in the Bay of Fundy, along the Scotian Shelf, and in the broader northwestern Atlantic extending to Newfoundland. Despite phenotypic differences between sampling locations, we found an overall lack of genetic diversity and population structure in horse mussels in the Northwest Atlantic Ocean. All sampled locations had low heterozygosity, very low FST, elevated inbreeding coefficients, and deviated from Hardy-Weinberg Equilibrium, highlighting generally low genetic diversity across all metrics. Principal components analysis, Admixture analysis, pairwise FST calculations, and analysis of outlier loci (potentially under selection) all showed no independent genomic clusters within the data, and an analysis of molecular variance showed that less than 1% of the variation within the SNP dataset was found between sampling locations. Our results suggest that connectivity is high among horse mussel populations in the Northwest Atlantic, and coupled with large effective population sizes, this has resulted in minimal genomic divergence across the region. These results can inform conservation design considerations in the Bay of Fundy and support further integration into the broader regional conservation network.Cite this data as: Van Wyngaarden, Mallory et al. (2024). Widespread genetic similarity between Northwest Atlantic populations of the horse mussel, Modiolus modiolus. Published: May 2025. Coastal Ecosystem Science Division, Maritimes Region, Fisheries and Oceans Canada, Dartmouth, NS.

The toponymic features of the CanVec series include proper nouns designating places and representations of the territory. This data come from provincial, territorial and Canadian toponymic databases. They are used in the CanVec Series for cartographic reference purposes and vary according to the scale of display. The toponymic features of the CanVec series can differ from the Canada's official geographical names.The CanVec multiscale series is available as prepackaged downloadable files and by user-defined extent via a Geospatial data extraction tool. Related Products (Open Maps Links):[Topographic Data of Canada - CanVec Series](https://open.canada.ca/data/en/dataset/8ba2aa2a-7bb9-4448-b4d7-f164409fe056)Users can obtain information about Canada's official toponyms at: **[Geographical names in Canada](https://www.nrcan.gc.ca/maps-tools-publications/maps/geographical-names-canada/10786)**

Since 1985, research surveys targeting scallops—primarily the sea scallop (Placopecten magellanicus) and, to a lesser extent, the Icelandic scallop (Chlamys islandica)—have been conducted by Fisheries and Oceans Canada (DFO) at one- or two-year intervals around the Magdalen Islands (fishing area 20A). The main objective of this survey is to assess the status of sea scallop stocks. The study area is situated south of the Magdalen Islands, where scallop beds are typically sampled at depths ranging from approximately 25 to 35 m. Sampling stations are randomly selected from a predetermined fixed grid, with sampling conducted along transects at these randomly assigned locations within the study area. Each station is sampled using a lined Digby scallop dredge (20 mm mesh size), towed for roughly 500 m across the seabed.This publication includes three files: the file biometriePetoncle_20, which contains detailed biometric data (species, size, weights and sex) from 1998 to 2024; the file taillePetoncle_20, which provides the size of the individuals sampled from 2009 to 2024; and the file traitPetoncle_20 which contains the abundances and densities per tow from 2009 to 2024. Data on abundances and densities per tow from 1998-2008 is available upon request.This dataset is updated every one to two years as data becomes available. A cleaning of aberrant data has been carried out. However, there is missing data in various columns of the dataset – use the data with caution. If you have any questions please contact DFO.DataManagementSAISB-GestionDonneesDAISS.MPO@dfo-mpo.gc.ca or the author. For certain time periods, associated species are identified and semi-quantitatively counted directly on the sorting table, and the results are presented in the following publications: - https://open.canada.ca/data/en/dataset/6529a4b0-f863-4568-ac71-1fa26cf68679- https://open.canada.ca/data/en/dataset/71732ad5-5c70-4dbf-916d-a94e1380c53b 

Land Features entities are: Island, Shoreline, Wooded Area, Saturated soil, Landform Feature (esker, sand\...), and Cut Line. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Toponymic Features entity is Named Feature (geographical name or toponym). CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@gov.yk. ca](mailto:geomatics.help@yukon.ca)

Toponymic Features entity is Named Feature (geographical name or toponym). CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Toponymic Features entity is Named Feature (geographical name or toponym). CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)