Topographic maps produced by Natural Resources Canada conform to the National Topographic System (NTS) of Canada. Indexes are available in three standard scales: 1:1,000,000, 1:250,000 and 1:50,000. The area covered by a given mapsheet is determined by its latitude and longitude. 1:1,000,000 mapsheets are identified by a combination of three numbers (e.g. 098). 1:250,000 mapsheets are identified by a combination of numbers, and letters ranging from A through P (e.g. 098C). Sixteen smaller segments (1 to 16) form blocks used for 1:50,000 mapping (e.g. 098C03).

This dataset is produced for the Government of Alberta and is available to the general public. Note that the distribution contact is different for the general public than for Government of Alberta ministries. Please consult the Distribution Information of this metadata for the appropriate contact to acquire this dataset. The National Topographic System of Canada (NTS) is a national mapping reference grid defined by Natural Resources Canada (NRCan) that is based on degrees of latitude and longitude. Starting at the Prime Meridian and at the equator, the 1:250 000 grid is formed by intersecting every degree of the meridians with every two degrees of parallels. Each polygon in the grid is designated with a two digit number and a single letter (Example 83H). The province of Alberta is covered by 45 complete and 17 partially complete 1:250 000 NTS blocks.

This dataset is produced for the Government of Alberta and is available to the general public. Note that the distribution contact is different for the general public than for Government of Alberta ministries. Please consult the Distribution Information of this metadata for the appropriate contact to acquire this dataset. The National Topographic System of Canada (NTS) is a national mapping reference grid defined by Natural Resources Canada (NRCan) that is based on degrees of latitude and longitude. Starting at the Prime Meridian and at the Equator, the 1:50 000 grid is formed by intersecting every 1/4 degree of the meridians with every 1/2 degrees of parallels. It can also true that the standard 1:250 000 NTS block is broken down into 16 1:50 000 blocks that a numbered south to north alternating east to west then west to east from one to 16. Each polygon in the grid is designated with a two digit number. a single letter and two additional numbers (Example 83H08). The province of Alberta is covered by 670 complete and 131 partially complete 1:50 000 NTS blocks.

Land Features entities are: Island, Shoreline, Wooded Area, Saturated soil, Landform Feature (esker, sand\...), and Cut Line. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This dataset is produced for the Government of Alberta and is available to the general public. Note that the distribution contact is different for the general public than for Government of Alberta ministries. Please consult the Distribution Information of this metadata for the appropriate contact to acquire this dataset. The National Topographic System of Canada (NTS) is a national mapping reference grid defined by Natural Resources Canada (NRCan) that is based on degrees of latitude and longitude. Starting at the Prime Meridian and at the Equator, the 1:50 000 grid is formed by intersecting every 1/8 degree of the meridians with every 1/4 degrees of parallels. It is also true that the standard 1:20 000 NTS block is broken down into 4 1:20 000 blocks that are labelled by quadrant. Each polygon in the grid is designated with a two digit number. a single letter. two additional numbers and a two letter quadrant value (Example 83H08NE). The 1:20 000 NTS grid was developed to support the Provincial Digital Base Mapping Project and is not part of the formal NRCan NTS program. The province of Alberta is covered by 2838 complete and 269 partially complete 1:20 000 NTS blocks.

CanVec contains more than 60 topographic features classes organized into 8 themes: Transport Features, Administrative Features, Hydro Features, Land Features, Manmade Features, Elevation Features, Resource Management Features and Toponymic Features.This multiscale product originates from the best available geospatial data sources covering Canadian territory. It offers quality topographic information in vector format complying with international geomatics standards.CanVec can be used in Web Map Services (WMS) and geographic information systems (GIS) applications and used to produce thematic maps. Because of its many attributes, CanVec allows for extensive spatial analysis.Related Products (Open Maps Links):**[Constructions and Land Use in Canada - CanVec Series - Manmade Features](https://open.canada.ca/data/en/dataset/fd4369a4-21fe-4070-914a-067474da0fd6)****[Lakes, Rivers and Glaciers in Canada - CanVec Series - Hydrographic Features](https://open.canada.ca/data/en/dataset/9d96e8c9-22fe-4ad2-b5e8-94a6991b744b)****[Administrative Boundaries in Canada - CanVec Series - Administrative Features](https://open.canada.ca/data/en/dataset/306e5004-534b-4110-9feb-58e3a5c3fd97)****[Mines, Energy and Communication Networks in Canada - CanVec Series - Resources Management Features](https://open.canada.ca/data/en/dataset/92dbea79-f644-4a62-b25e-8eb993ca0264)****[Wooded Areas, Saturated Soils and Landscape in Canada - CanVec Series - Land Features](https://open.canada.ca/data/en/dataset/80aa8ec6-4947-48de-bc9c-7d09d48b4cad)****[Transport Networks in Canada - CanVec Series - Transport Features](https://open.canada.ca/data/en/dataset/2dac78ba-8543-48a6-8f07-faeef56f9895)****[Elevation in Canada - CanVec Series - Elevation Features](https://open.canada.ca/data/en/dataset/64aad38d-f692-4ab6-bf2c-f938586c1249)****[Map Labels - CanVec Series - Toponymic Features](https://open.canada.ca/data/en/dataset/b3fdcd34-4533-415f-8f83-68f17f9d5d68)**

This collection is a legacy product that is no longer supported. It may not meet current Government standards.The National Topographic Data Base (NTDB) comprises digital vector data sets that cover the entire Canadian landmass. The NTDB includes features such as watercourses, urban areas, railways, roads, vegetation, and relief. The organizational unit for the NTDB is the National Topographic System (NTS), based on the North American Datum of 1983 (NAD83). Each file (data set) consists of one NTS unit at either the 1:50,000 or 1:250,000 scale.Related Products:[NTDB Correction Matrices, 2003-2009](https://ouvert.canada.ca/data/en/dataset/b6d0c19c-27e3-4392-b21f-49b1eec95653)

Stream Macro-Reaches delineated through interpretation of Topographic features from the 1:50,000 scale Canadian National Topographic Series of Maps.

The Ontario Vector Topographic Data Cache is a collection of topographic data, that has been preprocessed for fast, seamless display at predefined scales. The topographic data includes constructed and natural features that make up Ontario’s landscape. The cache provides limited data from areas outside Ontario’s boundaries, such as the United States and adjacent provinces and territories. __Technical information__ Two versions of the Topographic Data Cache are available: 1. The traditional raster version is available for a variety of GIS applications and is updated annually. 2. The vector version is suitable for online web map applications as well as modern GIS software and is updated twice a year. Contributing data layers may have different maintenance and update cycles. Some cache layers have been processed in a way that makes it easier for them to be displayed in a mapping product. Other layers are unchanged from the authoritative data. The cartographic symbology used in the data cache is intentionally muted to allow users to showcase their data. The Ontario Vector Topographic Data Cache is created from many source datasets, which are described in the Ontario Vector Topographic Data Cache user guide. If you are interested in getting this authoritative data, you can download it from the [Ontario GeoHub](http://www.ontario.ca/geohub). For instructions on getting a copy of either version of the cache for use in mapping applications, visit the [Ontario GeoHub](http://www.ontario.ca/geohub).

The 246 Watershed Groups of BC based on the 1:50,000 scale Canadian National Topographic Series of Maps.