With the changing climate conditions, marine traffic along Canada’s coastal regions has increased over the past few decades and the need to improve our state of preparedness for oil-spill-related emergencies is critical. Baseline coastal information, such as shoreline form, substrate, and vegetation type, is required for prioritizing operations, coordinating onsite spill response activities (i.e., Shoreline Cleanup Assessment Technique [SCAT]), and providing information for wildlife and ecosystem management. Between 2011 and 2016, georeferenced high-definition videography and photos were collected for various study sites along the east coast. The study areas include Labrador, Bay of Fundy and Chedabucto Bay in Atlantic Canada.Data was collected during ice-free and low tide conditions (where applicable) between July and September. Low-altitude helicopter surveys were conducted at each study site to capture video of the shoreline characteristics. In addition to acquiring videography, ground-based observations were recorded in several locations for validation.Shoreline segmentation was then carried out by manual interpretation of the oblique videography and the photos aided by ancillary data. This involved splitting and classifying the shoreline vectors based on homogeneity of the upper intertidal zone. Detailed geomorphological information (i.e., shoreline type, substrate, slope, height, accessibility etc.) describing the upper intertidal, lower intertidal, supratidal and backshore zones was extracted from the video and entered into a geospatial database using a customized data collection form. In addition, biological characteristics like biobands, water features, fauna, human use etc. observed along the coast were recorded.The data was also validated through ground observations (when available) and a second interpreter QA (quality analysis) was performed on each dataset to ensure high quality and consistency. The final dataset contains segments ranging in length from 150 metres to 2500 metres. In total, from 2011 to 2016, within the 3 study sites, about 1,850 km of shoreline were mapped.

With the changing climate conditions, marine traffic along Canada’s coastal regions has increased over the past couple of decades and the need to improve our state of preparedness for oil-spill-related emergencies is critical. Baseline coastal information, such as shoreline form, substrate, and vegetation type, is required for prioritizing operations, coordinating onsite spill response activities (i.e. Shoreline Cleanup Assessment Technique [SCAT]), and providing information for wildlife and ecosystem management. Between 2013 and 2019, georeferenced high-definition videography and photos were collected for various study sites along the west coast. The study areas include the mainland, inlets, channels and islands along the BC coast starting from Kitimat in the north to Quadra Island in the south, including Haida Gwaii and North Vancouver Island in the west and Burrard Inlet in the extreme south.Data was collected during low tide conditions (where applicable) between July and September. Low-altitude helicopter surveys were conducted at each of the study site to capture video of the shoreline characteristics. In addition to acquiring videography, ground-based observations were recorded in several locations for validation.Shoreline segmentation was then carried out by manual interpretation of the oblique videography and the photos aided by ancillary data. This involved splitting and classifying the shoreline vectors based on homogeneity of the upper intertidal zone. Detailed geomorphological information (i.e. shoreline type, substrate, slope, height, accessibility etc.) describing the upper intertidal, lower intertidal, supratidal and backshore zones was extracted from the video and entered into a geospatial database using a customized data collection form. In addition, biological characteristics like biobands, water features, fauna, human use etc. observed along the coast were recorded.The data was also validated through ground samples (when available) and a second interpreter QA (quality analysis) was performed on the dataset to ensure high quality and consistency. The final dataset contains segments ranging in length from 150 metres (45 metres for study areas surveyed in 2018-19) to 2500 metres. In total, from 2013 to 2019, about 15,000 km of shoreline were segmented.

With the changing climate conditions, marine traffic along Canada’s coastal regions has increased over the past couple of decades and the need to improve our state of preparedness for oil-spill-related emergencies is critical. Baseline coastal information, such as shoreline form, substrate, and vegetation type, is required for prioritizing operations, coordinating onsite spill response activities (i.e. Shoreline Cleanup Assessment Technique [SCAT]), and providing information for wildlife and ecosystem management. Between 2010 and 2016, georeferenced high-definition videography and photos were collected for various study sites along the north coast of Canada. The study areas include Beaufort Sea, Mackenzie Delta channels and Banks Island in the western Canadian Arctic and James Bay, Hudson Bay, Nunavik, Resolute Bay, Victoria Strait, Baffin Island and Coronation Gulf in the eastern Canadian Arctic.Data was collected during ice-free and low tide conditions (where applicable) between July and September. Low-altitude helicopter surveys were conducted at each study site to capture video of the shoreline characteristics. In addition to acquiring videography, ground-based observations were recorded in several locations for validation.Shoreline segmentation was then carried out by manual interpretation of the oblique videography and the photos aided by ancillary data. This involved splitting and classifying the shoreline vectors based on homogeneity of the upper intertidal zone. Detailed geomorphological information (i.e. shoreline type, substrate, slope, height, accessibility etc.) describing the upper intertidal, lower intertidal, supratidal and backshore zones was extracted from the video and entered into a geospatial database using a customized data collection form. In addition, biological characteristics like biobands, water features, fauna, human use etc. observed along the coast were recorded.The data was also validated through ground observations (when available) and a second interpreter QA (quality analysis) was performed on each dataset (excluding Nunavik) to ensure high quality and consistency. The final dataset contains segments ranging in length from 150 metres to 2500 metres. In total, from 2010 to 2016, within the 8 study sites, about 16,800 km of shoreline were segmented.

The Moderate Resolution Imaging Spectroradiometer (MODIS ) is one of the most sophisticated sensors that is used in a wide range of applications related to land, ocean and atmosphere. It has 36 spectral channels with spatial resolution varying between 250 m and 1 km at nadir. MODIS channels 1 (B1, visible) and 2 (B2, near infrared) are available at 250 m spatial resolution, an additional five channels for terrestrial applications (bands B3 to B7) are available at 500 m spatial resolution, the other twenty-nine channels not included in this data set capture images with a spatial resolution of 1 km. The MODIS record begins in March 2000 and extends to present with daily measurements over the globe. This level 3 product for Canada was created from the following original Level 1 (1B) MODIS data (collection 5): a) MOD02QKM - Level 1B 250 m swath data, 5 min granules; b ) MOD02HKM - level 1B , 500 m swath data, 5 min granules; c) MOD03 - level 1 geolocation information, 1 km swath data, 5 min granules. All these data are available from the DAAC Earth Observing System Data Gateway (NASA http://ladsweb.nascom.nasa.gov/data/search.html). The terrestrial channels MODIS (B3 to B7) at 500 m spatial resolution were reduced to 250 m with an adaptive regression system and normalization described in Trishchenko et al. (2006, 2009), and the data were mapped using a Lambert Conformal Conic (LCC ) projection (Khlopenkov et al., 2008). These data were combined to form pan-Canadian images using a technique for detection of clear sky, clouds and cloud shadows with a maximum interval of 10 days (Luo et al., 2008). Atmospheric and sun-sensor geometry corrections have not been applied. For each date, data include forward and backward scattering observations as separate files. This allows data to be optimized for a given application. For general use, data from either forward or backward scattering or both should be used. Future release of the MODIS time series will correct the forward and backward scattering geometry to provide a single best observation for each pixel.

To support a wide range of efforts to understand the geographic context and historical conditions of the Indian residential schools sites for a wide range of stakeholders, Indigenous Services Canada has created a Web service to access and visualize historical aerial photography for those sites. The Historical aerial photography of Indian residential schools dataset contains digital scans of aerial photographs that were acquired from 1924 to 1998 over Indian Residential school sites and surrounding areas across Canada, as well as basic information about each photography and depicted site. The digital images were georeferenced, to match ground coordinates, saved in a resampled uncompressed raster format and compiled in a single mosaic layer. The dataset does not include the complete range of aerial photographs of each site. Instead, an attempt has been made to select a single optimal photograph for each site based on good photographic quality and the site's years of operation. In some cases no photograph is available, and in others a photograph was only available after the years of operation. The source scanned prints was obtained from the archives of the National Air Photo Library (NAPL) of Natural Resources Canada (NRCAN). This dataset should be considered evergreen as new information and photography sources are identified.It should be noted that this dataset can only be downloaded using ArcGIS and ArcPro software as well as other GIS software.

This dataset was developed to document the procedures for acquiring underwater images in the Banc-des-Américains Marine Protected Area (MPA). Its primary objective is to provide a comprehensive inventory of metadata linked to imagery campaigns that allowed us to conduct a basic characterization of the area, and now that are used for ecological monitoring of the benthic habitats within the MPA.Metadata were collected during imagery surveys conducted since 2012, using three main methods: drop cameras on the crest, baited drop stereoscopic cameras on both the crest and plains, and towed cameras on the plains. For each operation are shared the type of gear used, sampling method, date, geographic coordinates, and acquisition depth.The released dataset contains only descriptive information related to the acquisition of images : file identifier, location, sampling methodology, depth, and technical imaging parameters. It does not include image files themselves, visual content, or the results of image analyses.A systematic quality control is applied to ensure completeness and consistency of the metadata: field format standardization, validation of GPS coordinates, verification of dates and recorded depths. Clear instructions guide the recording of metadata to guarantee their reliability for management and scientific monitoring purposes.

Yukon highresolution satellite imagery is distributed from the Government of Yukonimagery repository. This is a dynamic service containing satellite imagery forlocations in the Yukon, Canada.This data is hostedin Yukon Albers equal area projection. It can be viewed and queried in theGeoYukon application: [https://mapservices.gov.yk.ca/GeoYukon](https://mapservices.gov.yk.ca/GeoYukon).For more informationcontact geomatics.help@yukon.ca.

Data include a collection of annual land cover maps derived from MODIS 250 m spatial resolution remotely sensed imagery for the period 2000 to 2011. Processing of the time series was designed to reduce the occurrence of false change between maps. The method was based on change updating as described in Pouliot et al. (2011, 2013). Change detection accounted for both abrupt changes such as forest harvesting and more gradual changes such as recurrent insect defoliation. To determine the new label for a pixel identified as change, an evidential reasoning approach was used to combine spectral and contextual information. The 2005 MODIS land cover of Canada at 250 m spatial resolution described in Latifovic et al. (2012) was used as the base map. It contains 39 land cover classes, which for time series development was considered too detailed and was reduced to 25 and 19 class versions. The 19 class version corresponds to the North America Land Change Monitoring System (NALCMS) Level 2 legend as described in Latifovic et al. (2012). Accuracy assessment of time series is difficult due to the need to assess many maps. For areas of change in the time series accuracy was found to be 70% based on the 19 class thematic legend.This time series captures the spatial distribution of dominant land cover transitions. It is intended for use in modeling, development of remote sensing products such as leaf area index or land cover based albedo retrievals, and other exploratory analysis. It is not appropriate for use in any rigorous reporting or inventory assessments due to the accuracy of the land cover classification and uncertainty as to the capture of all relevant changes for an application.NOTE: To see this entire product in the map viewer, use a base map in the "World" section (EPSG: 3857).

VIDEO FLIGHT POINTS are a specific GPS spatial point recorded during the video taping of the shoreline. They are represented by a specific latitude and longitude taken at a specific date and time. They are associated with a specific VIDEO SEGMENT and link to online Youtube video of the recorded flight.

Yukon mediumresolution satellite imagery is distributed from the Government of Yukonimagery repository. This is a dynamic service containing satellite imagery forlocations in the Yukon, Canada.This data is inYukon Albers equal area projection. It can be viewed and queried in theGeoYukon application: [https://mapservices.gov.yk.ca/GeoYukon](https://mapservices.gov.yk.ca/GeoYukon).For more informationcontact [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca).