The daily mean is the average of all unit values for a given day.

The annual maximum and minimum instantaneous data are the maximum and minimum instantaneous values for a given year.

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater depth is measured on the field, using a water level meters. The depth is then subtracted from the elevation of the measurement site to obtain the water level elevation. The dataset is a general description of the measurement site including location and well elevation. It features a series of points of the surface elevation of the groundwater body.

The annual maximum and minimum daily data are the maximum and minimum daily mean values for a given year.

The North America Surface Water Values point dataset contains the current water level and stream flow values as recorded by Canadian and USA hydrometric gauging station locations. Daily values are recorded as well as comparisons with historical measurements, including difference in values from the previous day, the mean level for that calendar date, the annual mean water level, and maximum and minumum recorded levels. Percentile values based on historical average for both water level and stream flow are also included.Real-time gauging station data for Canada is available here: https://wateroffice.ec.gc.ca/search/statistics_e.htmlReal-time gauging station data for the United States is available here: https://waterservices.usgs.gov/rest/Statistics-Service.html

This product provides the median of monthly maximum turbidity values (in nephelometric turbidity units) for drinking water facilities by drainage region. Turbidity refers to the relative cloudiness of water, caused by suspended particles in water. The Survey of Drinking Water Plants collected this monthly maximum turbidity data for surface water sources from facilities reporting turbidity data for at least 10 months in 2013. These facilities served 24 million people and produced 4,091 million cubic metres of potable water from surface water sources in 2013. Source water turbidity was monitored continuously at 42% of these drinking water plants in 2013, daily at 34% of plants and less frequently at the remaining plants.

This product provides the ratio of surface freshwater intake to water yield for August 2013, with the exception of drainage regions 7, 8, 16, 17 and 18, which use the ratio of August intake to the long-term minimum monthly water yield. Surface freshwater intake aggregates data from the Survey of Drinking Water Plants, 2013 and the Industrial Water Use Survey, 2013 with estimates of agricultural water use for 2013 based on the Agricultural Water Use Survey and the Alberta Irrigation Information report. Data for water use by the oil and gas industry and households not supplied by a public water provider are also excluded.

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater levels measured are interpolated / extrapolated to obtain groundwater level on every cell of the hydrogeological unit raster. Surfer and ArcGis are the software usually used to create groundwater level raster. The dataset designates a raster with a groundwater level, for each cell of the hydrogeological unit.

Province-wide spatial view showing the most downstream point of a stream, as determined by Water Allocation staff, to have a current or potential water quantity/quality concern. Note: This layer has replaced the older Water Allocation Restrictions view spatial layer. This data is updated nightly.

Timing windows are the period(s) during the year when work may be carried out in and about water bodies with the lowest risk to fish and wildlife species and habitat. Timing windows and terms and conditions vary based on regional differences in fish and wildlife species and habitat, and geography. The timing window of least risk to fish and fish habitat must be applied to all activities in water bodies, as well as tributaries that have a risk of depositing sediment into water bodies. Windows of least risk are designed to protect all fish species known to occur in a water body.