This kimberlite xenocryst dataset includes the electronic microprobe data from silicate and oxide xenocryst minerals from various ultrabasic to kimberlite rock occurrences in the northern Alberta kimberlite province. These data, which total 4,285 analyses, include 897 garnet 533 clinopyroxene 791 olivine 275 phlogopite 870 spinel/chromite 919 ilmenite

BiologicEcologic ISO Feature Dataset symbolization and publication. September 5, 2017.

This is the Grid Unit portion of the Oil and Gas Land Division System. This is a grid system consisting of three sections, Area, Section and Unit used to describe Yukon Oil and Gas Dispositions, Leases and Licences. Every Grid Section shall be divided into Units.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

####Leading Group for the Cariboo Region (pinegroup or firgroup). #### 1. IDF - Fir Group: includes all forest polygons in NDT 4 (IDF and BG biogeoclimatic zones) that meet any of the following criteria: *a) Douglas-fir ( Fd or Fdi) leading or ponderosa pine leading; *b) Lodgepole pine leading, and Douglas-fir ( Fd or Fdi) or ponderosa pine greater than 15% in any inventory layer; *c) Trembling aspen leading, and Douglas-fir ( Fd or Fdi) or Ponderosa pine greater than 15% in any inventory layer, and spruce, red-cedar, cottonwood and birch less than 6% in any inventory layer; *d) No species information in inventory data (usually NSR stands), and inventory type group for pre-harvest stand or the current stand = 1, 2, 3, 4, 5, 6, 7, 8, 29, or 32 These inventory type groups correspond to the following species compositions F, FC, FCy, FH, FS, FPl, Fpy, FL, FDEcid, PlF and Py. If inventory type group=0 and pre-harvest inventory type is not available, classify the polygon as Pine Group. 2. IDF-Pl Group: includes all forest polygons in NDT 4 (IDF and BG biogeoclimatic zones) that do not meet the above definition for IDF-Fir Group.

Mascot geodetic control monuments for BC. Geodetic Control Monuments are a network of interconnected markers in the ground which have accurately determined coordinates, and/or elevations. They are fixed points on which to spatially reference surveys, mapping, aerial and satellite imaging, etc

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

This theme presents observations of invasive exotic species (IAS)transmitted and validated using the Sentinelle tool, an EEE detection system.An invasive exotic species is a plant, animal or microorganism (virus,bacteria or fungi) that are introduced outside of their natural range. Sonestablishment or its spread may pose a threat to the environment,the economy or society. The species listed are species of fauna and floraconcerning (or potentially worrying) for Quebec's biodiversity. Ellesinclude EEE present in Quebec and EEE not listed in Quebec atmonitor.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

A hydrogeological unit is defined as any soil or rock unit or zone that by virtue of its hydraulic properties has a distinct influence on the storage or movement of groundwater. It is considered the main dataset from the GGP point of view. Hydrogeological units are ranked into five levels (from largest to smallest): 1) hydrogeological region, 2) hydrogeological context, 3) aquifer system, 4) hydrostratigraphic unit, and 5) aquifer. Here are formal definitions for these different types of hydrogeologic units. - Hydrogeological region Hydrogeological regions are areas in which the properties of sub-surface water, or groundwater, are broadly similar in geology, climate and topography. There are 9 such regions identified in Canada (ref?). - Hydrogeological context Hydrogeological contexts are units of reporting, conceptually narrower than regions, and are additionally delineated by physiographic and hydrogeological aspects. - Aquifer system ""A heterogeneous body of intercalated permeable and poorly permeable material that functions regionally as a water-yielding hydraulic unit; it comprises two or more permeable beds [aquifers] separated at least locally by aquitards [confining units] that impede groundwater movement but do not greatly affect the regional hydraulic continuity of the system"" (Poland et al., 1972). - Hydrostratigraphic unit (HSU) ""Body of sediment and/or rock characterized by ground water flow that can be demonstrated to be distinct under both unstressed (natural) and stressed (pumping) conditions, and is distinguishable from flow in other HSUs"" (Noyes et al.) - Aquifer ""A formation, group of formations, or part of a formation that contains sufficient saturated permeable material to yield significant quantities of water to wells and springs"" (Lohman et al, 1972, p. 21). The rank attribute is used to specify the scope of the described unit. The general principle behind this specification is to allow the same data structure to apply to various types of hydrogeological units, from the local aquifer to the almost continental hydrogeological region. The dataset includes properties such as identification, physiography, geology, aquifer description and properties, water balance, groundwater use and risk. It features numerical values or a general description when no values are available. The description can also be used to add context to the numerical values. For each property, metadata identifying the source of the original data, links to similar data in GIN, and description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data. This dataset is designed to capture and represent a set of synthesized information pertaining to hydrogeological units through maps and succinct table reports. Some attributes (or properties) of the dataset are irrelevant depending of the rank of the unit. In general, this dataset is organised to include multiple properties associated with aquifers and larger hydrogeologic units. These properties are grouped into categories, which include identification, physiography, geology, aquifer description, water balance, groundwater use and risk. The numerical values associated with each of the properties can be used to create thematic maps; hence, the importance of using standardized units of measurement and definitions for these properties. When numerical values are not available, a general description may be supplied instead. The description can also be used to add context to the numerical values. Because this dataset is the cornerstone of the national view on groundwater, supplemental contextual information (metadata) must be part of the data. Thus, for each property, metadata identifying the source of the original data, links to similar data in GIN, and a description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.