The spatial planning framework for Canada's national network of Marine Protected Areas (MPAs) is comprised of 13 ecologically defined bioregions that cover Canada's oceans and the Great Lakes. Note that the geographic boundaries for the bioregions are fuzzy and may change based on ecosystemic conditions.Detailed descriptions and discussions on the federal network of marine bioregions can be found in: - DFO. 2009. Development of a Framework and Principles for the Biogeographic Classification of Canadian Marine Areas. DFO Can. Sci. Advis. Sec. Sci. Advis. Rep. 2009/056 (http://www.dfo-mpo.gc.ca/csas-sccs/publications/sar-as/2009/2009_056-eng.htm);- DFO. 2010. Proceedings of a National Science Advisory Process to Provide Guidance on the Development of a Framework and Principles for the Biogeographic Classification of Canadian Marine Areas; 15-16 June 2009. DFO Can. Sci. Advis. Sec. Proceed. Ser. 2009/039. (http://www.dfo-mpo.gc.ca/csas-sccs/publications/pro-cr/2009/2009_039-eng.htm); and - National Framework for Canada's Network of Marine Protected Areas (http://www.dfo-mpo.gc.ca/oceans/publications/mpanf-cnzpm/page01-eng.html).

This dataset was compiled as part of a multiyear effort lead by Fisheries and Oceans Canada (DFO) to support sustainable aquaculture regulation in the Coast of Bays, an area of the south coast of Newfoundland. It is the first of a series aiming to provide an oceanographic knowledge baseline of the Coast of Bays.This dataset consists of GIS products and analyses summarized in a spreadsheet. The GIS data include vector shapefiles and raster TIFF images, providing information on the area of interest physical dimensions (e.g. bays area, volume, perimeter, length and width) and other physical characteristics (e.g. tidal volume and freshwater input).A full description of the data and of its use in the context of the motivating project can be found in http://www.dfo-mpo.gc.ca/csas-sccs/Publications/ResDocs-DocRech/2017/2017_076-eng.html. Analyses from this dataset were presented during a Canadian Science Advisory Secretariat (CSAS) meeting which took place in St John’s in March 2015 (http://www.dfo-mpo.gc.ca/csas-sccs/schedule-horraire/2015/03_25-26b-eng.html) and from which a Science Advisory Report (http://www.dfo-mpo.gc.ca/csas-sccs/Publications/SAR-AS/2016/2016_039-eng.html) and Proceedings (http://www.dfo-mpo.gc.ca/csas-sccs/Publications/Pro-Cr/2017/2017_043-eng.html) were published.

Core viewing and rock sawing facilities are available Monday - Friday, 8:30 a.m. to 4:30 p.m. To see information on the status of our drill core program and download forms for accessing the collection, visit [https://yukon.ca/en/yukon-geological-survey-core-library](https://yukon.ca/en/yukon-geological-survey-core-library) .To reserve the core library facilities, please contact [YGS-Minerals@yukon.ca](mailto:YGS-Minerals@yukon.ca)For comments or feedback on the dataset, please contact [ygstech@yukon.ca](mailto:ygstech@yukon.ca)Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This dataset was compiled as part of a multiyear effort lead by Fisheries and Oceans Canada (DFO) to support sustainable aquaculture regulation in the Coast of Bays, an area of the south coast of Newfoundland. It is the second of a series aiming to provide an oceanographic knowledge baseline of the Coast of Bays.This dataset includes temperature, salinity, and dissolved oxygen concentration profiles collected during CTD surveys, each survey containing a varying number of casts/profiles taken within the area of interest. In total, 760 profiles from 11 surveys, executed over 276 stations, were collected from June 2009 to November 2013. Data were processed and quality controlled using the instrumentation manufacturer guidelines, custom tools as well as visual inspection. Data are provided in tab-delimited text-based format compatible with most data processing language and tools (e.g. MS. Excel) as well as with the Ocean Data View software (https://odv.awi.de/) for rapid visualisation. A summary of the CTD profiles and stations surveyed is also provided as a comma separated values (CSV) file.A full description of the data and of its use in the context of the motivating project can be found in http://www.dfo-mpo.gc.ca/csas-sccs/Publications/ResDocs-DocRech/2017/2017_077-eng.html. Analyses from this dataset were presented during a Canadian Science Advisory Secretariat (CSAS) meeting which took place in St John’s in March 2015 (http://www.dfo-mpo.gc.ca/csas-sccs/schedule-horraire/2015/03_25-26b-eng.html) and from which a Science Advisory Report (http://www.dfo-mpo.gc.ca/csas-sccs/Publications/SAR-AS/2016/2016_039-eng.html) and Proceedings (http://www.dfo-mpo.gc.ca/csas-sccs/Publications/Pro-Cr/2017/2017_043-eng.html) were published.

The dataset includes timeseries of horizontal current speed and direction, vertical current speed, water depth, and temperature at instrument depth from Acoustic Doppler Current Profiler (ADCP) moorings. Data were collected as part of a multiyear effort lead by Fisheries and Oceans Canada (DFO) to support sustainable aquaculture regulation in the Coast of Bays, an area of the south coast of Newfoundland. This dataset is the third of a series aiming to provide an oceanographic knowledge baseline of the Coast of Bays, Newfoundland. It consists of 73 ADCP timeseries varying in length from about 26 days to 235 days collected between 2009 and 2014. Analyses from this dataset were presented during a Canadian Science Advisory Secretariat (CSAS) meeting which took place in St John’s in March 2015 (http://www.dfo-mpo.gc.ca/csas-sccs/schedule-horraire/2015/03_25-26b-eng.html) and from which a Science Advisory Report (http://www.dfo-mpo.gc.ca/csas-sccs/Publications/SAR-AS/2016/2016_039-eng.html), Proceedings (http://www.dfo-mpo.gc.ca/csas-sccs/Publications/Pro-Cr/2017/2017_043-eng.html) and several research documents were published.

This layer represents the seasonal distribution of the St. Lawrence Estuary beluga whale population (Delphinapterus leucas). Three groups are represented: females with calf, adult males and mixed sectors. Herd distribution was defined using Fisheries and Oceans Canada (DFO) published data about beluga whales (see references).Herd distribution areas are only valid during the summer, and the uses of these areas by the herds are unknown.Data source :Michaud, R. 1993. Distribution estivale du béluga du St-Laurent; synthèse 1986-1992. Can. Tech. Rep. Fish. Aquat. Sci. 1906: vi + 28 p.

The Yukon GeologicalSurvey (YGS) has compiled over 195 surficial geology maps into a standardizedGIS format, providing approximately 80% coverage of the territory. The mapsrange in scales from 1:250,000 to 1:10,000 with spatial overlap between scales.The original maps were produced by various agencies, including the GeologicalSurvey of Canada, YGS, Yukon Government, universities, and the City ofWhitehorse.All original featuredescriptions have been preserved and also converted to standardized valuesusing the Yukon terrain classification system. The compilation includes 4 GISdatasets and supporting documents available for download via [YGS integrated data system](https://data.geology.gov.yk.ca/Compilation/33#InfoTab) (YGSIDS) or GeoYukon. A .lyr file is [provided](https://data.geology.gov.yk.ca/Compilation/33#InfoTab) to symbolize feature classes and differentiate overlapping maps atdifferent scales. Additionally, there is a surficial geology map index.The polygonattributes captured include surficial material, texture, age, surfaceexpression, and geomorphological processes.Line featuresinclude geological contacts, glacial limits, glacial landforms (cirques,arêtes, eskers, meltwater channels, moraines), and non-glacial landforms(faults, lineaments, landslides, escarpments).Point featuresinclude field station, fossil and sample locations, glacial landforms(erratics, kames, kettles, drumlins, flutings), permafrost features (pingos,palsas, patterned ground, thermokarst depressions), and other non-glaciallandforms (landslides, tors).The map indexprovides information on each map publication such as author, map title, mapscale, publisher.These data arevaluable for land-use applications in the territory, including: mineral andplacer exploration, geotechnical engineering, infrastructure planning, granularresource assessments, permafrost modeling, agricultural assessments, forestmanagement, and biophysical or ecological land classification.Distributed from GeoYukon by the Government of Yukon. Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Yukon Geological Survey (YGS) has compiled over 195 surficial geology maps into a standardized GIS format, providing approximately 80% coverage of the territory. The maps range in scales from 1:250,000 to 1:10,000 with spatial overlap between scales. The original maps were produced by various agencies, including the Geological Survey of Canada, YGS, Yukon Government, universities, and the City of Whitehorse.All original feature descriptions have been preserved and also converted to standardized values using the Yukon terrain classification system. The compilation includes 4 GIS datasets and supporting documents available for download via [YGS integrated data system](https://data.geology.gov.yk.ca/Compilation/33) (YGSIDS) or GeoYukon. A .lyr file is [provided](https://data.geology.gov.yk.ca/Compilation/33) to symbolize feature classes and differentiate overlapping maps at different scales. Additionally, there is a surficial geology map index.The polygon attributes captured include surficial material, texture, age, surface expression, and geomorphological processes.Line features include geological contacts, glacial limits, glacial landforms (cirques, arêtes, eskers, meltwater channels, moraines), and non-glacial landforms (faults, lineaments, landslides, escarpments).Point features include field station, fossil and sample locations, glacial landforms (erratics, kames, kettles, drumlins, flutings), permafrost features (pingos, palsas, patterned ground, thermokarst depressions), and other non-glacial landforms (landslides, tors).The map index provides information on each map publication such as author, map title, map scale, publisher.These data are valuable for land-use applications in the territory, including: mineral and placer exploration, geotechnical engineering, infrastructure planning, granular resource assessments, permafrost modeling, agricultural assessments, forest management, and biophysical or ecological land classification.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Yukon Geological Survey (YGS) has compiled over 195 surficial geology maps into a standardized GIS format, providing approximately 80% coverage of the territory. The maps range in scales from 1:250,000 to 1:10,000 with spatial overlap between scales. The original maps were produced by various agencies, including the Geological Survey of Canada, YGS, Yukon Government, universities, and the City of Whitehorse.All original feature descriptions have been preserved and also converted to standardized values using the Yukon terrain classification system. The compilation includes 4 GIS datasets and supporting documents available for download via [YGS integrated data system](https://data.geology.gov.yk.ca/Compilation/33) (YGSIDS) or GeoYukon. A .lyr file is [provided](https://data.geology.gov.yk.ca/Compilation/33) to symbolize feature classes and differentiate overlapping maps at different scales. Additionally, there is a surficial geology map index.The polygon attributes captured include surficial material, texture, age, surface expression, and geomorphological processes.Line features include geological contacts, glacial limits, glacial landforms (cirques, arêtes, eskers, meltwater channels, moraines), and non-glacial landforms (faults, lineaments, landslides, escarpments).Point features include field station, fossil and sample locations, glacial landforms (erratics, kames, kettles, drumlins, flutings), permafrost features (pingos, palsas, patterned ground, thermokarst depressions), and other non-glacial landforms (landslides, tors).The map index provides information on each map publication such as author, map title, map scale, publisher.These data are valuable for land-use applications in the territory, including: mineral and placer exploration, geotechnical engineering, infrastructure planning, granular resource assessments, permafrost modeling, agricultural assessments, forest management, and biophysical or ecological land classification.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Yukon Geological Survey (YGS) has compiled over 195 surficial geology maps into a standardized GIS format, providing approximately 80% coverage of the territory. The maps range in scales from 1:250,000 to 1:10,000 with spatial overlap between scales. The original maps were produced by various agencies, including the Geological Survey of Canada, YGS, Yukon Government, universities, and the City of Whitehorse.All original feature descriptions have been preserved and also converted to standardized values using the Yukon terrain classification system. The compilation includes 4 GIS datasets and supporting documents available for download via [YGS integrated data system](https://data.geology.gov.yk.ca/Compilation/33) (YGSIDS) or GeoYukon. A .lyr file is [provided](https://data.geology.gov.yk.ca/Compilation/33) to symbolize feature classes and differentiate overlapping maps at different scales. Additionally, there is a surficial geology map index.The polygon attributes captured include surficial material, texture, age, surface expression, and geomorphological processes.Line features include geological contacts, glacial limits, glacial landforms (cirques, arêtes, eskers, meltwater channels, moraines), and non-glacial landforms (faults, lineaments, landslides, escarpments).Point features include field station, fossil and sample locations, glacial landforms (erratics, kames, kettles, drumlins, flutings), permafrost features (pingos, palsas, patterned ground, thermokarst depressions), and other non-glacial landforms (landslides, tors).The map index provides information on each map publication such as author, map title, map scale, publisher.These data are valuable for land-use applications in the territory, including: mineral and placer exploration, geotechnical engineering, infrastructure planning, granular resource assessments, permafrost modeling, agricultural assessments, forest management, and biophysical or ecological land classification.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)