Home /Search
Search datasets
We have found 2,432 datasets. You can refine your search by entering a search term below, or clicking on the Filters button for some advanced options.
Datasets: 87,222
Contributors: 40
Results
2,432 Datasets, Page 1 of 244
High Resolution Digital Elevation Model Mosaic (HRDEM Mosaic) - CanElevation Series
The High Resolution Digital Elevation Model Mosaic provides a unique and continuous representation of the high resolution elevation data available across the country. The High Resolution Digital Elevation Model (HRDEM) product used is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The mosaic is available for both the Digital Terrain Model (DTM) and the Digital Surface Model (DSM) from web mapping services. It is part of the CanElevation Series created to support the National Elevation Data Strategy implemented by NRCan. This strategy aims to increase Canada's coverage of high-resolution elevation data and increase the accessibility of the products.Unlike the HRDEM product in the same series, which is distributed by acquisition project without integration between projects, the mosaic is created to provide a single, continuous representation of strategy data. The most recent datasets for a given territory are used to generate the mosaic. This mosaic is disseminated through the Data Cube Platform, implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The mosaic is available from Web Map Services (WMS), Web Coverage Services (WCS) and SpatioTemporal Asset Catalog (STAC) collections. Accessible data includes the Digital Terrain Model (DTM), the Digital Surface Model (DSM) and derived products such as shaded relief and slope.The mosaic is referenced to the Canadian Height Reference System 2013 (CGVD2013) which is the reference standard for orthometric heights across Canada.Source data for HRDEM datasets used to create the mosaic is acquired through multiple projects with different partners.Collaboration is a key factor to the success of the National Elevation Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.
Floods in Canada - Cartographic Product Collection
Collection of flood products for active and past floods throughout Canada as monitored by Natural Resources Canada using satellite imagery for emergency response. This collection of cartographic products regroups flood extent polygons and their associated footprints. Three visualization timeframes are available : - **[Active Floods in Canada](https://open.canada.ca/data/en/dataset/9cad712a-5ac5-4248-b7d7-2db1a3892509)** - **[Floods in Canada - Current Year](https://open.canada.ca/data/en/dataset/b1afd8d2-6e14-4ec4-9a09-652221a6cb71)** - **[Floods in Canada - Archive](https://open.canada.ca/data/en/dataset/74144824-206e-4cea-9fb9-72925a128189)**
Canadian Digital Elevation Model, 1945-2011
This collection is a legacy product that is no longer supported. It may not meet current government standards.The Canadian Digital Elevation Model (CDEM) is part of Natural Resources Canada's altimetry system designed to better meet the users' needs for elevation data and products.The CDEM stems from the existing Canadian Digital Elevation Data (CDED). In these data, elevations can be either ground or reflective surface elevations.A CDEM mosaic can be obtained for a pre-defined or user-defined extent. The coverage and resolution of a mosaic varies according to latitude and to the extent of the requested area.Derived products such as slope, shaded relief and colour shaded relief maps can also be generated on demand by using the Geospatial-Data Extraction tool. Data can then be saved in many formats.The pre-packaged GeoTiff datasets are based on the National Topographic System of Canada (NTS) at the 1:250 000 scale; the NTS index file is available in the Resources section in many formats.
High Resolution Digital Elevation Model (HRDEM) - CanElevation Series
The High Resolution Digital Elevation Model (HRDEM) product is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The complete coverage of the Canadian territory is gradually being established. It includes a Digital Terrain Model (DTM), a Digital Surface Model (DSM) and other derived data. For DTM datasets, derived data available are slope, aspect, shaded relief, color relief and color shaded relief maps and for DSM datasets, derived data available are shaded relief, color relief and color shaded relief maps.The productive forest line is used to separate the northern and the southern parts of the country. This line is approximate and may change based on requirements. In the southern part of the country (south of the productive forest line), DTM and DSM datasets are generated from airborne LiDAR data. They are offered at a 1 m or 2 m resolution and projected to the UTM NAD83 (CSRS) coordinate system and the corresponding zones. The datasets at a 1 m resolution cover an area of 10 km x 10 km while datasets at a 2 m resolution cover an area of 20 km by 20 km. In the northern part of the country (north of the productive forest line), due to the low density of vegetation and infrastructure, only DSM datasets are generally generated. Most of these datasets have optical digital images as their source data. They are generated at a 2 m resolution using the Polar Stereographic North coordinate system referenced to WGS84 horizontal datum or UTM NAD83 (CSRS) coordinate system. Each dataset covers an area of 50 km by 50 km. For some locations in the north, DSM and DTM datasets can also be generated from airborne LiDAR data. In this case, these products will be generated with the same specifications as those generated from airborne LiDAR in the southern part of the country.The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013), which is now the reference standard for heights across Canada.Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The tiles are aligned within each project.The product High Resolution Digital Elevation Model (HRDEM) is part of the CanElevation Series created in support to the National Elevation Data Strategy implemented by NRCan. Collaboration is a key factor to the success of the National Elevation Data Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.
Historical Flood Events (HFE)
Representation of the causes of flooding events in the form of multiple points. The point groupings correspond to the set of locations that were affected by the same event. The inventory of past flooding events was compiled from various public sources and standardized into a common data model. Sources used are included in the data. Event locations have been extensively revised to have one location per location reported as affected by the flood. Flood events for which no location was included in the sources used are positioned on the place name of the location affected by the flood. The event positions do not indicate where the flooding occurred. Flood events that affected more than one locality are represented by a multipoint.For each event after January 1, 1980 caused by a heavy rainfall or a coastal storm , a precipitation analysis document, a precipitation animation and the precipitation data are available. These documents are the result of a collaboration with Environment and Climate Change Canada.Disclaimer:It should be noted that no consultation was conducted with the various providers and stakeholders of the historic flood data. Disparities in content among the various sources result in an incomlete product. No warranty is given as to the accuracy or completeness of the information provided. The absence of information does not mean that no flooding has occurred.
Canadian Protected and Conserved Areas Database (CPCAD)
The Canadian Protected and Conserved Areas Database (CPCAD) is the authoritative source of data on protected and conserved areas in Canada. The database consists of the most up-to-date spatial and attribute data on marine and terrestrial protected areas in all governance categories recognized by the International Union for Conservation of Nature (IUCN), as well as Other effective area-based conservation measures (OECMs, or conserved areas) across the country. Indigenous Protected and Conserved Areas (IPCAs) are also included if they are recognized as protected or conserved areas. CPCAD adheres to national reporting standards and is freely available to the public.CPCAD is compiled and managed by Environment and Climate Change Canada (ECCC), in collaboration with federal, provincial, territorial, and other reporting authorities that provide the data. The database contains combined data from all these Canadian reporting authorities, who have determined that their areas meet the Canadian criteria as protected or conserved areas. CPCAD is used by a wide range of organizations, including governments, environmental non-governmental organizations (ENGOs), academia, land managers, industry, and the general public. CPCAD supports many of the Government of Canada’s priorities including Canada’s national reporting on protected areas, Canada’s international reporting on protected areas as a result of Canada’s commitments under the United Nations Convention on Biological Diversity, and Canada’s protected areas program by providing baseline information.More detailed information on CPCAD is available by downloading the User Manual.The data is current as of the date of the most recent revision. For prior years, please reach out to scf-geocarto-cws-geomapping@ec.gc.ca.
The Canadian Radiological Monitoring Network – Airborne Radioactivity
This dataset provides the results obtained by Health Canada’s Radiological Monitoring Network (CRMN) for airborne radioactivity content at monitoring stations across Canada. More information about the CRMN network can be found on the Health Canada website (see link below). The results provided are activity concentration, uncertainty and the minimum detectable concentration for the naturally occurring radionuclides, beryllium-7 (7Be) and lead-210 (210Pb), and the anthropogenic (originating from human activity) radionuclides, cesium-134 (134Cs), cesium-137 (137Cs), and iodine-131 (131I). The data comes from the analysis of particulates accumulated in filter media, drawn by high-volume air samplers fixed in the field. Such data is typically dominated by natural radionuclides, such as 7Be and 210Pb. 7Be is a natural cosmogenic radionuclide that is produced in the upper atmosphere when cosmic rays bombard oxygen and nitrogen. 210Pb is also a natural radioisotope that results from the decay of uranium (238U) to radium (226Ra). 238U comes from the soil and eventually decays to 210Pb. Radon-222, which is a natural radioactive gas, is also a part of this decay chain. Radon moves through the soil and becomes diluted in the atmosphere. If a home is built on soil or rocks that contain uranium, radon can seep into homes and may accumulate to high levels. More information about the Health Canada radon program can be found on the Health Canada website. For all our stations, the airborne radioactivity data shows a small increase in the activity concentration of 134Cs, 137Cs and 131I measured between March and May of 2011, attributable to the nuclear accident at the Fukushima-Daiichi Nuclear Power Station. It is important to note that, even at their respective peaks, the measured activity concentrations of 134Cs, 137Cs and 131I represent only a small fraction of typical background exposure from natural sources of radiation. Occasionally, other small increases in activity concentration of anthropogenic radionuclides are observed. Spikes in 137Cs activity are often associated with forest fires, which can lead to the re-suspension of 137Cs already present in the environment, most likely from atmospheric nuclear weapons testing in the 1960’s. Detection of small amounts of 131I is commonly associated with its medical use by hospitals.The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.
Maps of reporting facilities – criteria air contaminants
The National Pollutant Release Inventory (NPRI) is Canada's public inventory of pollutant releases (to air, water and land), disposals and transfers for recycling.The files below contain a map of Canada showing the locations of all facilities that reported direct releases of Criteria Air Contaminants to the NPRI. The data are for the most recent reporting year, by reported total quantities of these releases. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting facilities, a dataset is available in a CSV format.Please consult the following resources to enhance your analysis:- Guide on using and Interpreting NPRI Data: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/using-interpreting-data.html - Access additional data from the NPRI, including datasets and mapping products: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/exploredata.html
Extreme Weather Indices: Precipitation
Precipitation (moisture availability) establishes the economic yield potential and product quality of field crops. Both dry and wet precipitation extremes have the ability to inhibit proper crop growth. The maximum daily precipitation index covers the risk of excessive precipitation in the short term, while the other indices pertain to longer term moisture availability.Agriculture is an important primary production sector in Canada. Agricultural production, profitability, sustainability and food security depend on many agrometeorological factors. Extreme weather events in Canada, such as drought, floods, heat waves, frosts and high intensity storms, have the ability to significantly impact field crop production. Agriculture and Agri-Food Canada (AAFC) and Environment and Climate Change Canada (ECCC) have together developed a suite of extreme agrometeorological indices based on four main categories of weather factors: temperature, precipitation, heat, and wind. The extreme weather indices are intended as short-term prediction tools and generated using ECCC’s medium range forecasts to create a weekly index product on a daily basis.
Groundwater Composition, Groundwater Geoscience Program
Water composition is defined by measuring the amounts of its various constituents; these are often expressed as milligrams of substance per litre of water (mg/L). Sampling methods vary according to the types of analysis. Dataset point: The dataset represents a general description of the sample, including name, ID, type of analysis and lab. It includes numbers describing the results of the analysis and physical properties of groundwater. Time series: The dataset represents a general description of the sample, including name, ID, type of analysis and lab. It includes series of numbers describing the results of the analysis and physical properties of groundwater with associated date. Dynamic values over time at the same sites provides temporal variation data of groundwater composition.
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and
topics that matter to you.
Please send us your feedback