The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at six unique sites across Canada, including the Port of Saint John (New Brunswick). The overall purpose of the Program is to collect localized ecological data in these areas to build a better baseline understanding of marine ecological conditions. The Maritimes region has developed a physical oceanography project to align with the interests and data needs of local communities and stakeholders. Starting in 2020, data describing the depth and temperature of tidal flood waters have been collected at a series of intertidal locations in the Port of Saint John vicinity, to characterize high marsh flood tides and water level fluctuations near the Courtenay Bay causeway. Inundation by marine waters in high marsh areas is typically limited to spring tides, while the water level in Courtenay Bay is influenced by anthropogenic infrastructure (e.g. causeway, tide gates). The resulting data can enhance studies ranging from coastal vulnerability and resilience to salt marsh morphodynamics, by quantifying the frequency, amplitude and duration of tidal inundation. Data were collected using Hobo U20-001-02 water level loggers, which were deployed inside stilling wells constructed from 15-inch lengths of perforated ABS pipe (2¼” diameter). The stilling wells were sunk to a depth of 6 inches below ground, with the water level logger suspended inside the well from a bolt near the top. The logger was positioned with a rigid wire such that the measurement volume was equal to ground level, while allowing the logger to be easily removed for downloading and precisely replaced at the measurement location. Loggers were accessed 2-3 times per year to download, and were removed during the winter months. Data have been compensated for changing atmospheric pressure using the Barometric Compensation Tool in HobowarePro (version 3.7.21) and barometric pressure data collected from a dry location during the study period. The resulting water level is reported in meters, and is relative to the elevation of the water level logger (e.g. above ground level).Citation: Port of Saint John intertidal water level and temperature (2020-2022). Coastal Environmental Baseline Program. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, N.B. XX-XX-2024

The Department of Fisheries established a survey of demersal juvenile Atlantic cod (*Gadus morhua*) in the nearshore (<10 m deep) in 1959. This survey aimed to characterize the distribution and abundance of juvenile Atlantic cod and was based upon Norway's Flodevigen sampling program which has been conducted continuously since 1919. A 25 m seine was used to sample juvenile Atlantic cod nursery locations on the Avalon Peninsula and Northeast coast of the island of Newfoundland in September and October. The survey continued until 1964 and became known as the Fleming survey, after original initiator Alistair Fleming. The survey was reinstated by Memorial University of Newfoundland from 1992 to 1997. Multiple tows were conducted at a subset of the original 55 Fleming sites located in St. Mary's Bay, Trepassey Bay, the Southern Shore, Conception Bay, Trinity Bay, Bonavista Bay, Gander Bay, New World Island, Fortune Harbour, Badger Bay, Halls Bay and Green Bay.This data set includes several different subsets, some of which span both Fleming Survey periods (1959-1964 and 1992-1997):I. JuvCodCatch60s90s:Catches of juvenile Atlantic cod (1959-1964, 1992-1997) from the first two consecutive tows at each site. This is a summary based on JuvCodLengths90s and FlemingSurveyData60s;II. JuvCodLength90s:Lengths of all individual juvenile Atlantic cod caught for each site (1992-1997);III. SiteEnvData60s90s:Station data for Fleming data 1992-1997;IV. FlemingSurveyData60s:Fleming survey data from 1959-1964 (note there are three record types pertaining to: station data "type 1"; general species catch data including juvenile Atlantic cod grouped by age class ("1+", "Zeroes", and "Total") "type 2; and juvenile Atlantic cod (species 223) listed in length bins "type 3"; andV. FlemingBycatch60s92to96:Bycatch data from 1959-1964 & 1992-1996 from first two tows at each site. This is a summary based partly on the FlemingSurveyData60s set.

Species characterization by environmental DNA (eDNA) is a method that allows the use of DNA released into the environment by organisms from various sources (secretions, faeces, gametes, tissues, etc.). It is a complementary tool to standard sampling methods for the identification of biodiversity. This project provides a list of invertebrates species whose DNA has been detected in water samples collected at 2018 using the marker COI.The surveys were carried out in the summer of 2018 from August 11 to 14, between Forestville and Godbout (Haute-Côte-Nord). Sampling was carried out between 9-52 meters depth in 40 stations with one sample par station. Two liters of water were filtered through a 1.2 µm fiberglass filter. DNA extractions were performed with the DNeasy Blood and Tissue extraction kit (Qiagen). Negative field, extraction and PCR controls were added at the different stages of the protocol. Libraries at the COI locus were prepared by Genome Quebec and sequenced on an Illumina MiSeq PE250 system. The bioinformatics analysis of the sequences obtained was carried out using an in-house analysis pipeline as reported in Bourret et al. 2022. A first step made it possible to obtain a molecular operational taxonomic unit table (MOTU) using the cutadapt software for the removal of the adapters and the DADA2 R package for the filtration, fusion, chimera removal and data compilation. The MOTUs table was subsequently corrected by taking into account the negative controls, where the number of observations in the latter was removed from the linked samples. Singleton MOTUs have also been removed. Finally, the taxonomic assignments were carried out on the MOTUs using the IDTAXA classifier (present in the DECIPHIER R package) using a training set trained on the COI reference bank for Golf St-Laurent (GSL-rl v1.0, https://github.com/GenomicsMLI-DFO/MLI_GSL-rl) and a threshold of 40. Detections with an “Unreliable due to gaps” category were reported at the genus level only.The file provided includes generic activity information, including site, station name, date, marker type, assignment types used for taxa identification, and a list of taxa or species. The list of taxa has been verified by a biodiversity expert from the Maurice-Lamontagne Institute.This project was funded by Fisheries and Oceans Canada's Coastal Environmental Baseline Data Program under the Oceans Protection Plan. This initiative aims to acquire baseline environmental data that contributes to the characterization of significant coastal areas and supports evidence-based assessments and management decisions to preserve marine ecosystems.Data are also available on SLGO platform : https://doi.org/10.26071/ogsl-cd4c205b-f63b

A Conservation Unit (CU) is a group of wild Pacific salmon sufficiently isolated from other groups that, if extirpated, is very unlikely to recolonize naturally within an acceptable timeframe, such as a human lifetime or a specified number of salmon generations.Holtby and Ciruna (2007) provided a framework for aggregating the five species of salmon (genus Oncorhynchus) found on Canada’s Pacific coast into species-specific CUs based on three primary characteristics: ecotypology, life history and genetics. The first stage in the description of the Conservation Units is based solely on ecology. The ecotypologies used in this framework include a combined characterization of both freshwater and near-shore marine environments, and is termed “joint adaptive zone”. The second stage of the description involves the use of life history, molecular genetics, and further ecological characterizations to group and partition the first stage units into the final Conservation Units. The result is CUs that are described through the joint application of all three axes. It is important to note that CUs are distinct from other aggregates of Pacific salmon, such as designatable units (DUs) under the Species at Risk Act or management units (MUs).CU Counting Sites:Salmon spawner enumeration data in the Pacific Region is stored and managed in the New Salmon Escapement Database (NuSEDS). The term “escapement” is used to refer to the group of mature salmon that have ‘escaped’ from various sources of exploitation, and returned to freshwater to spawn and reproduce. This data is assigned to a “Counting Site”, which may be a complete watercourse with a marine terminus, a tributary to a larger watercourse, or a defined reach within a watercourse that may or may not encompass the entire population but represents an index of the abundance of that population. CU Status:CUs form the basic unit for assessment under Canada’s Policy for the Conservation of Wild Salmon Policy (WSP) (DFO 2005). The biological status of a CU is evaluated using a number of metrics (Holt et al. 2009; Holt 2009), which indicate a WSP status zone: Red (poor status), Amber (marginal status), or Green (healthy status). A final step then incorporates all metric and status-related information into a final integrated status for each CU, along with expert commentary to support the final status determination (e.g., DFO 2012; DFO 2016). This information is used as inputs to fisheries management processes to help prioritize assessment activities and management actions.Note: CU boundaries were reviewed in 2020-2021 and have been updated from the BC Freshwater Atlas 1:50,000 scale to the BC Freshwater Atlas 1:20,000 scale. The CU boundaries were last updated in March 2023. Please be aware that CUs may be reviewed and are subject to change without notice.Please refer to Conservation Unit Review Requests-Form and Summary for a list of CU review requests that are ongoing or have been finalized.

This dataset provides the results obtained by Health Canada’s Radiological Monitoring Network (CRMN) for tritium content in atmospheric water vapor sampled from monitoring stations in Ontario, Quebec and New Brunswick. More information about the CRMN network can be found on the Health Canada website (see link below). The results provided are for tritium activity concentration, expressed in units of becquerels per cubic meter (Bq/m3). Atmospheric water is sampled monthly for determination of tritium content. The majority of such monitoring activity occurs in close proximity to nuclear power plants. Until 1996, Health Canada monitored the areas near Darlington, Bruce and Pickering in Ontario, Gentilly in Quebec, and Point Lepreau in New Brunswick. In 1996, Health Canada’s monitoring of the Ontario stations was terminated to avoid redundancy, since a similar initiative was underway through the Ontario Ministry of Labour. Currently, the CRMN monitors six sites in the vicinity of Point Lepreau, four sites in the vicinity of Gentilly, and a single site in the Greater Toronto Area. The average tritium concentration for the CRMN stations is 0.22 Bq/m3 for the time period from 2004 to 2013. This is consistent with results reported for other monitoring stations in close proximity to Canadian nuclear power stations, and the levels are considered to be safe from a health perspective. Note that the tritium values are measured using liquid scintillator measurements. This requires removing the background contribution from the measurement. The uncertainty associated with each measurement, can lead to reported values of less than zero. The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

This data contains the memorials and monuments located in communities across the country. Currently, more than 8,000 memorials are included in this data. This data is regularly updated as we continue to receive information on Canadian military memorials.

This dataset provides the results obtained by Health Canada’s Radiological Monitoring Network (CRMN) for the tritium activity concentration in drinking water originating from the water treatment plants in Ottawa, ON. More information about the CRMN network can be found on the Health Canada website (see link below). The results provided are the tritium activity concentration in units of becquerels per litre (Bq/L). Although ensuring water quality is a matter of provincial jurisdiction, the CRMN, in collaboration with the city of Ottawa, has been conducting a targeted program to monitor the radiological content of drinking water from two water treatment plants in Ottawa, ON.The Guidelines for Canadian Drinking Water Quality recommend a Maximum Acceptable Concentration (MAC) for tritium in drinking water of 7000 Bq/L. The measured activity concentrations of tritium in drinking water are well below this guideline value.The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

This dataset is comprised of locations and current information for all schools for Kindergarten to Grade 12 in British Columbia. Indicators are included for schools that offer French programs including: Core French, Early French Immersion, Late French Immersion and Francophone Program.

This data report provides information on temperature and salinity in the Godbout region of the St. Lawrence Estuary. Sampling was carried out from 2019 to 2021 over an area of <5 km2. The databases provide information on temperature and salinity at an hourly rate for 2 years. The aim of this project is to analyze telemetry data from sea urchins (Strongylocentrotus droebachiensis), snow crabs (Chionoecetes opilio), rock crabs (Cancer irroratus), spider crabs (Hyas spp.) and whelks (Buccinum undatum). This report focuses on the presentation of benthic environmental data collected throughout the study with high spatial and temporal resolution. All reported variables were collected at the seafloor, as the aim of the project was to study the movement of epibenthic species. Temperature data were collected from three devices: telemetry receivers with integrated temperature sensors (InnovaseaTM), HoboTM and Star-OddiTM probes. Temperature data processing involved cleaning up extreme values (below 2°C and above 20°C) and homogenizing the data to fit the bathymetry matrix (1m x 1m cells) of the study site. Temperature data are provided in a NetCDF file with a matrix of the entire study site, where there is a stratum for each hour between August 2019 and October 2021 and in each file, a temperature value for each pixel of the raster. Salinity data were collected from Star-OddiTM probes only. Salinity values were averaged hourly for the entire study area. Salinity data is provided as a CSV file with one salinity value per hour for the entire study area.

The Canadian Protected and Conserved Areas Database (CPCAD) is the authoritative source of data on protected and conserved areas in Canada. The database consists of the most up-to-date spatial and attribute data on marine and terrestrial protected areas in all governance categories recognized by the International Union for Conservation of Nature (IUCN), as well as Other effective area-based conservation measures (OECMs, or conserved areas) across the country. Indigenous Protected and Conserved Areas (IPCAs) are also included if they are recognized as protected or conserved areas. CPCAD adheres to national reporting standards and is freely available to the public.CPCAD is compiled and managed by Environment and Climate Change Canada (ECCC), in collaboration with federal, provincial, territorial, and other reporting authorities that provide the data. The database contains combined data from all these Canadian reporting authorities, who have determined that their areas meet the Canadian criteria as protected or conserved areas. CPCAD is used by a wide range of organizations, including governments, environmental non-governmental organizations (ENGOs), academia, land managers, industry, and the general public. CPCAD supports many of the Government of Canada’s priorities including Canada’s national reporting on protected areas, Canada’s international reporting on protected areas as a result of Canada’s commitments under the United Nations Convention on Biological Diversity, and Canada’s protected areas program by providing baseline information.More detailed information on CPCAD is available by downloading the User Manual.The data is current as of the date of the most recent revision. For prior years, please reach out to scf-geocarto-cws-geomapping@ec.gc.ca.