This is a spatial layer showing Ministry of Forests Free Use Permits. These are permits issued by the Ministry that authorize the permittee to cut and use Crown timber without charge. The permit is confined to a small area and for short durations of time.

Represents timber supply area and other land use boundaries in the province of Saskatchewan. Timber supply areas are the primary management unit used for the allocation of timber harvest, licensing, forest management planning and harvest volume schedules.The Saskatchewan Ministry of Environment regulates forestry activities on Crown “forest lands” — as defined by The Forest Resources Management Act — using several types of licenses and permits:  Forest Management Agreement (FMA)A forest management agreement is a 20-year agreement, typically with a larger forest company, conferring long-term harvesting rights for a specific volume of timber from a defined area, as well as responsibilities for long-term sustainable forest management. Term Supply Licence (TSL)A term supply licence (TSL) is a licence with a term of up to 10 years, granting rights to harvest specified forest volumes as well as responsibilities for forest management. A TSL may be volume-based or area-based.  Forest Product Permit (FPP)A forest product permit grants the right to harvest specified forest products for a term of up to one year. This permit is also used to regulate other activities, such as grazing in the forest. Land use is classified into three categories:  Commercial ForestAreas within the provincial forest that are available for commercial timber harvest allocation through the use of forest management agreements (FMA), volume-based or area-based term supply licences (TSL), or forest product permits (FPP).  Fringe ForestAreas, generally south of the provincial forest, that contain “forest lands” — as defined by The Forest Resources Management Act. Within the fringe forest, harvest allocations are administered by the Ministry of Environment through the use of forest product permits and volume-based term supply licenses.  Other UsesAreas within the provincial forest that are not available or suitable for forestry activities. These include protected areas and areas generally north of the commercial forest.  For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. Commercial forest and fringe forest areas are sub-divided into timber supply areas. Forest Names and Licence Holders are current as of August 31, 2020.

Get a list of provincially licensed operators that collect, transport, process and dispose of deadstock (dead farm animals) in Ontario. This dataset includes facility type, name, location/region and contact information of licensed deadstock operators in Ontario. The Ministry of Agriculture, Food and Agribusiness and the Ministry of the Environment, Conservation and Parks, in consultation with stakeholders, have developed regulations for the disposal of deadstock (dead farm animals) in Ontario. The regulations provide more disposal options for livestock producers and meat plant operators, with measures to protect the environment.

Outfitting Concessions (OCs) which are also known as Outfitting Areas, are legal boundaries that define an area where the holder of the concession has the exclusive right to outfit non-residents for the purpose of hunting big game animals (excepting special guiding licenses). If a non-resident wishes to hunt in the Yukon they must do so accompanied by a Yukon resident\--either a private individual who does this for free, or a commercial operator who does this as a business(an outfitter). Each outfitter is licensed to operate within a particular OA. There are 20 such concessions in the Yukon\--one per licensed outfitter. OCs are largely (but not always) defined by groupings of Game Management Areas. There are several areas within the Yukon (exclusive of National Parks) which are not covered by OCs. This data was built using the 1:250,000 National Topographic Data Base (NTDB) as the digitizing base.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The purpose of the Licence Area feature is to record areas where a licencee holds a timber resources licence, a woodlot licence or a fuel wood licence.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This spatial dataset represents the boundaries of areas designated under the [Aggregate Resources Act, R.S.O 1990](https://www.ontario.ca/laws/statute/90a08) where a licence or permit is required for aggregate extraction. Under the Act, all aggregate operations must be licensed on private land or permitted on Crown land. Use our interactive [Pits and Quarries map](https://www.ontario.ca/page/find-pits-and-quarries) to find aggregate designated areas and authorized sites.

This polygonal dataset represents authorized applications for a Mines Act permit known as a Permitted Mine Area (PMA). This dataset can be used in combination with the NoW point dataset which represents both applications for a Mines Act permit and issued authorizations for mining activities proposed in the application. **The regional mine PMA dataset is not complete for all mine sites in BC. Review the data quality section for more information** Point representation of NoW: https://catalogue.data.gov.bc.ca/dataset/fab53209-63be-4c61-8de4-3e3fceec4227 Applications for regional Mines Act permits are known as Notice of Work (NoW) applications. Regional mine permits are issued for mineral and coal exploration activities, sand and gravel production, quarry production, and placer mining. Major mine permits are issued for producing mineral and coal mines. Permits are issued by the chief permitting officer under section 10 of the Mines Act and administered by the ministry. **Regional mines include:** * Exploration — mineral, coal, rock quarry, industrial mineral or dimension stone * Sand and gravel — aggregate, rock or natural substances used for construction purposes * Placer   Most exploration and development activities require a permit under the Mines Act. A decision marks the end of the permitting process for a NoW application. The decision can either be to reject the application or to authorize the mining activities proposed in the NoW. * For new NoW authorizations, a Mines Act permit is issued * For an existing open Mines Act permit, the newly authorized mining activities are amended to the existing permit and the permit is re-issued   Notice of Work categories include: Notice of Work application type, Notice of Work application status. **Notice of Work application type** Field: NOW_APPLICATION_TYPE_DESC (NW_APPTYPD) * Coal * Mineral * Placer Operations * Quarry – Construction Aggregate * Quarry – Industrial Mineral * Sand and Gravel   **Notice of Work application status** Field: NOW_APPLICATION_STATUS_DESC (NW_APPSTAD) * Approved – mining activities in the NoW application have been authorized   **For the public view, please be aware that the ministry:** * Removed the attribute value of closed permits in the PERMIT_STATUS_CODE_DESC (PMT_STD) field. These records will show as permit status is NULL (empty). * Only shows mine commodities of gold or jade/nephrite in the MINE_COMMODITY_DESC (MN_COMD) field. All other commodity values remain NULL (empty)

This is a spatial layer that reflects operational activities for harvesting authorities. The harvesting authority is a legal area cleared by the Ministry of Forests and Range (that is, no other claims for the land exist) for harvesting purposes. This corresponds to the outlined areas on the Exhibit A maps. The Forest Tenures Section (FTS) is responsible for the creation and maintenance of digital Forest Atlas files for the province of British Columbia encompassing Forest and Range Act Tenures. It also supports the forest resources programs delivered by the MoFR. Each feature contains a Ministry of Forests and Range (MoFR) FEATURE_CLASS_SKEY (number) column that further defines the type of that feature. The layer contains harvesting authority boundaries for the following feature classes: Christmas Tree Permit (489), Forest Licence Cutting Permit (556), Licence to Cut (615), Timber Licence Cutting Permit (811), Timber Sale Licence Major Cutting Permit (818), Timber Sale Licence Minor (819), Tree Farm Licence Cutting Permit (834), WoodLot Licence Cutting Permit (864), Timber Sale Licence Minor Cutting Permit (917), and Community Forest Cutting Permit (2401). Each harvesting authority has a life cycle status code that is either PENDING - the harvesting authority has been submitted as a new harvesting authority or an amendment, but is not yet approved or rejected, ACTIVE - the harvesting authority is approved and activities may be taking place on the harvesting authority, or RETIRED - all activities have been completed for the harvesting authority

This dataset contains a list of licensed tile drainage contractors in Ontario who design and install agricultural tile drainage systems. These contractors hold a valid business license under the [Agricultural Tile Drainage Installation Act, 1990](https://www.ontario.ca/laws/statute/90a14) from the Ministry of Agriculture, Food and Agribusiness (OMAFA). Contractors with a business license must employ a licensed Class “A” machine operator and have licensed tile drainage machinery. Licenses are renewed annually (expire March 31), and the list is updated annually. The list is maintained by OMAFA and includes company names, contact names, addresses, telephone numbers, and emails.

The Non-Permit Area dataset is comprised of all the polygons that represent Non-Permit Areas in Alberta. The Non-Permit Areas are delineated areas where burning permits are not required by clients.