The Oil and Gas Rights dataset contains the digital boundaries for existing exploration licences, significant discovery licences, production licences, former permits, former leases and the Norman Wells Proven Area. These boundaries are available for download on the Northern petroleum pesources Website at https://www.rcaanc-cirnac.gc.ca/eng/1100100036087/1538585604719.The Oil and Gas Rights dataset is Crown-Indigenous Relations and Northern Affairs Canada (CIRNAC) and Indigenous Services Canada (ISC) primary source for northern petroleum titles geographic location on maps.

Tenure Areas are geographic administrative areas named for local features and used to group petroleum and natural gas Land Plats situated within the same local geographic area.

Facilities that separate and convert crude oil or other feedstock into liquid petroleum products, including upgraders and asphalt refineries.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.

This is the Grid Section portion of the Oil and Gas Land Division System. This is a grid system consisting of three sections, Area, Section and Unit used to describe Yukon Oil and Gas Dispositions, Leases and Licences. Every Grid Area shall be divided into sections. Grid Areas between 60 degrees and 68 degrees north shall be divided at intervals of 1/8 between the east and west boundaries. Grid Areas between 68 degrees and 70 degrees north shall be divided at intervals of 1/6. The north/south boundaries shall be divided at intervals of 1/10. Each section shall be numbered. Numbering starts with 1 in the southeast corner and moves north along the east edge to 10. The second row is numbered starting in the south again with 11 and goes north to 20. All other rows are number successively in the same manner.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Land Plats illustrate in map view the oil or gas Spacing Areas delimited in a pool, and names the geological formation in which the pool is recognised. Land Plats are the sole official record of where the Director of PandNG Titles Branch recognizes a pool of hydrocarbons to exist for the purpose of administering oil and gas title

Rural Utilities Gas Franchise areas are created and maintained by Rural Utilities under the authority of the Gas Distribution Act. It contains the following layers: Apex Franchise Areas, ATCO Franchise Areas, Coop Franchise Areas, County Franchise Areas, Independent Franchise Areas, Community Gas Distributors and Customer Meters. “Changes to boundaries are based on a) additions or deletions of lands under the Gas Distribution Act and b) annexations or dissolutions under the Municipal Government Act.” Franchises cannot be issued for federal lands. However, the gas distributors serving these lands are under the authority of the Gas Distribution Act. Please Note: Rural Utilities assumes no responsibility as to the accuracy or completeness of these plans, Individual distributors must be contacted for actual locations of their pipelines. For pipelines located in Indigenous Lands, please contact the applicable Band Administration Office or the gas distributor for that area. Rural Utilities will not be liable for any direct, indirect, special, punitive, or consequential damages arising from the use of, or the inability to use this website. Links to other websites are provided for convenience only. Rural Utilities does not control, endorse, or guarantee the accuracy, completeness, efficacy and timeliness of other websites and is not responsible for the privacy practices of other websites.

Stations containing prime movers, electric generators, and auxiliary equipment for converting mechanical, chemical, and/or fission energy into electric energy with an installed capacity of 100 megawatts or more.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.Parent Collection:[North American Cooperation on Energy Information, Mapping Data](https://open.canada.ca/data/en/dataset/aae6619f-f9f3-435d-bc32-42decd58b674)

Facilities are an oil and gas activity, defined in the Energy Resources Activities Act as a system of vessels, piping, valves, tanks and other equipment used to gather, process, measure, store or dispose of petroleum, natural gas, water or a substance referred to in paragraph (d) or (e) of the definition of pipeline. This dataset contains point features for proposed applications collected through the BC Energy Regulator's Application Management System (AMS). This dataset is updated nightly.

This is the Grid Area portion of the Oil and Gas Land Division System. This is a grid system consisting of three sections, Area, Section and Unit used to describe Yukon Oil and Gas Dispositions, Leases and Licences. A Grid area shall be bounded on the east and west sides by successive meridians of longitude of the series 124 00' 00", 124 15' 00", 124 30' 00" ,etc. On the north and south sides by parallels of latitude joining the points of intersection of the east and west boundaries with successive parallels of latitude of the series 60 00' 00", 60 10' 00", 60 20' 00", etc. Every grid shall be referred to by the latitude and longitude of the northeast corner of that grid area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The spatial representation for a Public Sustained Yield Unit, which is an area of Crown land, usually a natural topographic unit determined by drainage areas, managed for sustained yield by the Crown through the Ministry of Forests. It includes all Crown lands within the currently established boundaries of the unit and excludes federal lands, provincial parks, experimental forest reserves, gazetted watersheds and tree farm licences. Crown land designated as a public sustained yield unit under Section 6 of the Forest Act. A portion of a TSA