Historical floodplain boundaries in BC with a descriptive feature name for each floodplain area (i.e., 200-year floodplain, alluvial fan, or nothing/out-of-floodplain). Digitized from hardcopy 1:5,000 Floodplain Mapsheets for each project area

A regulated flood zone is an area of land likely to be flooded and delimited by mapping or, along the St. Lawrence River, by flood ratings. On the territory of Quebec City, the only regulated and mapped flood zones are appended to the revised Land Use and Development Plan (SAD). These areas, which are added to the river's flood zone delimited by flood ratings, are subject to the special standards of the transitional regime for the management of flood zones, banks and coastlines since 1 March 2022. ATTENTION: The route indicating the boundaries of flood zones is for illustrative purposes only. Legal delimitation work must be validated in the field by a land surveyor for each property concerned. Quebec City declines all responsibility for the interpretation of available data.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This map locates the areas of high current and low current of the Ottawa and Gatineau rivers. The low-current zone corresponds to the part of the floodplain, beyond the limit of the high-current zone, that can be flooded during a 100-year recurrent flood. The high-current zone that corresponds to the part of a floodplain that can be flooded during a 20-year recurrent flood. The floodplain corresponds to the space occupied by a lake or a watercourse during a flood period within the meaning of the Policy for the Protection of Coastal Shores and Floodplains. Appendix E - zoning by-law 502-2005 - amendment 502-237-2017, in force on July 24, 2017 Sources: Appendix E - zoning by-law 502-2005 - amendment 502-237-2017, in force on July 24, 2017 City of Gatineau, City of Gatineau, Department of Urban Planning and Sustainable Development, Department of Urban Planning and Sustainable Development, in force on July 24, 2017, in force, City of Gatineau, Department of Urban Planning and Sustainable Development, May 2014, May 2014, May 2014, Mapping of areas of large and weak currents of the Ottawa and Gatineau rivers from two sources: JFSA, April 2014, Determination and mapping of open water flood levels in the Gatineau River. 995-14 Quebec Water Expertise Center, March 2008, Determination of flood ratings corresponding to the large current zone and the low current zone, Ottawa River, CEHQ 07-114. The low-current zone corresponds to the part of the floodplain, beyond the limit of the high-current zone, that can be flooded during a 100-year recurrent flood. The high-current zone that corresponds to the part of a floodplain that can be flooded during a 20-year recurrent flood. The floodplain corresponds to the space occupied by a lake or a watercourse during a flood period within the meaning of the Policy for the Protection of Coastal Shores and Floodplains. Appendix E - zoning by-law 502-2005 - amendment 502-237-2017, effective July 24, 2017**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

A "contaminant attenuation zone" is a three-dimensional zone that is, * located on land adjacent to a landfilling site, * in the subservice or extends into the subsurface, and * is used or is intended to be used for the attenuation of contaminants from the landfilling site to levels that will not have an unacceptable impact beyond the boundary of the zone. This product requires the use of geographic information system (GIS) software.

Development areas located within the urbanization perimeter.attributs:ID - Unique IdentifierType - Type of zone**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Biogeoclimatic Ecosystem Classification (BEC) zone boundaries with percent protected, number of overlapping protected areas and other attributes added as a result of geoprocessing in the Protected Area System Overview (PASO) application. Protected area and park representation by BEC zone provides a zonal ecosystem context for natural resource planning processes such as; management plans, land use zoning, environmental risk assessment, landscape analysis, habitat supply, and management of high priority species. For important warnings about using this data for spatial analysis see the Data Quality section of the metadata

Municipal zoning in force. For more details, consult the municipal planning bylaws.attributs:ID - Unique IdentifierMunicipality - Municipal codeNo_zone - Identifier of the areaGridUse - Hyperlink to the grid of uses of the zone**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This is the Grid Area portion of the Oil and Gas Land Division System. This is a grid system consisting of three sections, Area, Section and Unit used to describe Yukon Oil and Gas Dispositions, Leases and Licences. A Grid area shall be bounded on the east and west sides by successive meridians of longitude of the series 124 00' 00", 124 15' 00", 124 30' 00" ,etc. On the north and south sides by parallels of latitude joining the points of intersection of the east and west boundaries with successive parallels of latitude of the series 60 00' 00", 60 10' 00", 60 20' 00", etc. Every grid shall be referred to by the latitude and longitude of the northeast corner of that grid area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This spatial data identifies breeding zones used by forest managers and forest genetic associations to manage provincial forest genetic assets. The data: * shows the boundaries of breeding zones * identifies the primary or target species within each zone Species are associated with certain breeding programs, seed orchards and progeny (descendant) testing installations.

The OIC's shown are current for each Development Area Boundary. Each has it's original Order in Council (OIC) as well as the most current OIC if there was a change in boundary. Zoning is contained within all Development Area Boundaries.Each Development Area Boundary maintains parcels with unique zoning designations. These zoning designations are found in the layer: CSW_LAND_TENURE.LP_ZONING_POLY_50KDistributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)